From: Fabio Estevam <[email protected]>
In case regulator_bulk_enable() fails, the previously enabled USB hub
clock should be disabled.
Fix it accordingly.
Fixes: 65e62b8a955a ("usb: misc: onboard_usb_hub: Add support for clock input")
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Frieder Schrempf <[email protected]>
Acked-by: Matthias Kaehlcke <[email protected]>
---
Changes since v1:
- Rebased against 6.9-rc2.
- Collected tags.
drivers/usb/misc/onboard_usb_hub.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
index c6101ed2d9d4..d8049275a023 100644
--- a/drivers/usb/misc/onboard_usb_hub.c
+++ b/drivers/usb/misc/onboard_usb_hub.c
@@ -78,7 +78,7 @@ static int onboard_hub_power_on(struct onboard_hub *hub)
err = regulator_bulk_enable(hub->pdata->num_supplies, hub->supplies);
if (err) {
dev_err(hub->dev, "failed to enable supplies: %pe\n", ERR_PTR(err));
- return err;
+ goto disable_clk;
}
fsleep(hub->pdata->reset_us);
@@ -87,6 +87,10 @@ static int onboard_hub_power_on(struct onboard_hub *hub)
hub->is_powered_on = true;
return 0;
+
+disable_clk:
+ clk_disable_unprepare(hub->clk);
+ return err;
}
static int onboard_hub_power_off(struct onboard_hub *hub)
--
2.34.1