When we enable Super-IO and GMAC/GNET on Loongson-2K we find they can
not work, there are several problems in the dts files, so fix them.
Huacai Chen(4):
LoongArch: Update dts for Loongson-2K1000 to support ISA/LPC.
LoongArch: Update dts for Loongson-2K2000 to support ISA/LPC.
LoongArch: Update dts for Loongson-2K2000 to support PCI-MSI.
LoongArch: Update dts for Loongson-2K2000 to support GMAC/GNET.
Signed-off-by: Huacai Chen <[email protected]>
---
2.27.0
Some Loongson-2K2000 platforms have ISA/LPC devices such as Super-IO,
define an ISA node in the dts file to avoid access error. Also adjust
the PCI io resource range to avoid confliction.
Signed-off-by: Huacai Chen <[email protected]>
---
arch/loongarch/boot/dts/loongson-2k2000.dtsi | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/loongarch/boot/dts/loongson-2k2000.dtsi b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
index a231949b5f55..dcee9f3783fd 100644
--- a/arch/loongarch/boot/dts/loongson-2k2000.dtsi
+++ b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
@@ -51,6 +51,13 @@ bus@10000000 {
#address-cells = <2>;
#size-cells = <2>;
+ isa@18400000 {
+ compatible = "isa";
+ #size-cells = <1>;
+ #address-cells = <2>;
+ ranges = <1 0x0 0x0 0x18400000 0x4000>;
+ };
+
pmc: power-management@100d0000 {
compatible = "loongson,ls2k2000-pmc", "loongson,ls2k0500-pmc", "syscon";
reg = <0x0 0x100d0000 0x0 0x58>;
@@ -141,7 +148,7 @@ pcie@1a000000 {
#size-cells = <2>;
device_type = "pci";
bus-range = <0x0 0xff>;
- ranges = <0x01000000 0x0 0x00008000 0x0 0x18400000 0x0 0x00008000>,
+ ranges = <0x01000000 0x0 0x00008000 0x0 0x18408000 0x0 0x00008000>,
<0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>;
gmac0: ethernet@3,0 {
--
2.43.0
Current dts file for Loongson-2K2000 misses the interrupt-controller &
interrupt-cells descriptions in the msi-controller node, and misses the
msi-parent link in the pci root node. Add them to support PCI-MSI.
Signed-off-by: Huacai Chen <[email protected]>
---
arch/loongarch/boot/dts/loongson-2k2000.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/loongarch/boot/dts/loongson-2k2000.dtsi b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
index dcee9f3783fd..481c6c869a8b 100644
--- a/arch/loongarch/boot/dts/loongson-2k2000.dtsi
+++ b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
@@ -116,6 +116,8 @@ pic: interrupt-controller@10000000 {
msi: msi-controller@1fe01140 {
compatible = "loongson,pch-msi-1.0";
reg = <0x0 0x1fe01140 0x0 0x8>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
msi-controller;
loongson,msi-base-vec = <64>;
loongson,msi-num-vecs = <192>;
@@ -147,6 +149,7 @@ pcie@1a000000 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
+ msi-parent = <&msi>;
bus-range = <0x0 0xff>;
ranges = <0x01000000 0x0 0x00008000 0x0 0x18408000 0x0 0x00008000>,
<0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>;
--
2.43.0
Some Loongson-2K1000 platforms have ISA/LPC devices such as Super-IO,
define an ISA node in the dts file to avoid access error.
Signed-off-by: Huacai Chen <[email protected]>
---
arch/loongarch/boot/dts/loongson-2k1000.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/loongarch/boot/dts/loongson-2k1000.dtsi b/arch/loongarch/boot/dts/loongson-2k1000.dtsi
index 49a70f8c3cab..b6aeb1f70e2a 100644
--- a/arch/loongarch/boot/dts/loongson-2k1000.dtsi
+++ b/arch/loongarch/boot/dts/loongson-2k1000.dtsi
@@ -100,6 +100,13 @@ bus@10000000 {
#size-cells = <2>;
dma-coherent;
+ isa@18000000 {
+ compatible = "isa";
+ #size-cells = <1>;
+ #address-cells = <2>;
+ ranges = <1 0x0 0x0 0x18000000 0x4000>;
+ };
+
liointc0: interrupt-controller@1fe01400 {
compatible = "loongson,liointc-2.0";
reg = <0x0 0x1fe01400 0x0 0x40>,
--
2.43.0
Current dts file for Loongson-2K2000's GMAC/GNET is incomplete, both irq
and phy descriptions are missing. Add them to make GMAC/GNET work.
Signed-off-by: Huacai Chen <[email protected]>
---
.../boot/dts/loongson-2k2000-ref.dts | 33 +++++++++++++++++++
arch/loongarch/boot/dts/loongson-2k2000.dtsi | 12 +++++--
2 files changed, 42 insertions(+), 3 deletions(-)
diff --git a/arch/loongarch/boot/dts/loongson-2k2000-ref.dts b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
index dca91caf895e..74b99bd234cc 100644
--- a/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
+++ b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
@@ -61,12 +61,45 @@ &xhci1 {
&gmac0 {
status = "okay";
+
+ phy-mode = "gmii";
+ phy-handle = <&phy0>;
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 {
+ reg = <2>;
+ };
+ };
};
&gmac1 {
status = "okay";
+
+ phy-mode = "gmii";
+ phy-handle = <&phy1>;
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy1: ethernet-phy@1 {
+ reg = <2>;
+ };
+ };
};
&gmac2 {
status = "okay";
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy2>;
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy2: ethernet-phy@2 {
+ reg = <0>;
+ };
+ };
};
diff --git a/arch/loongarch/boot/dts/loongson-2k2000.dtsi b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
index 481c6c869a8b..9eab2d02cbe8 100644
--- a/arch/loongarch/boot/dts/loongson-2k2000.dtsi
+++ b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
@@ -156,21 +156,27 @@ pcie@1a000000 {
gmac0: ethernet@3,0 {
reg = <0x1800 0x0 0x0 0x0 0x0>;
- interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+ <13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi";
interrupt-parent = <&pic>;
status = "disabled";
};
gmac1: ethernet@3,1 {
reg = <0x1900 0x0 0x0 0x0 0x0>;
- interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+ <15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi";
interrupt-parent = <&pic>;
status = "disabled";
};
gmac2: ethernet@3,2 {
reg = <0x1a00 0x0 0x0 0x0 0x0>;
- interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+ <18 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi";
interrupt-parent = <&pic>;
status = "disabled";
};
--
2.43.0