2024-04-15 11:42:29

by Christopher Obbard

[permalink] [raw]
Subject: [PATCH v1 0/1] Enable HDMI output support on the Debix Model A SBC

This series brings up the HDMI output on the Debix Model A SBC.

With support for the HDMI transmitter for the i.MX8MP SoC now merged[0],
we can now enable the HDMI output on the Debix Model A SBC.

The pinctrl values were blindly taken from the downstream BSP[1] and should
be checked by someone who knows this platform better than myself.

Also, with a 4K display there were a drm error with no output on the
display, but this error did not occur with a 1080P display:

imx-lcdif 32fc6000.display-controller: [drm] *ERROR* fbdev-dma: Failed to setup generic emulation (ret=-12)

It would be interesting to see if this error is present for others on a
different i.MX8MP device. I didn't have time to check this further and I
assume the issue to be in the driver rather than specific to this SBC, so
should not block this patch, but please correct me if I am wrong.

[0]: https://lore.kernel.org/all/[email protected]/
[1]: https://github.com/debix-tech/linux/blob/debix/arch/arm64/boot/dts/freescale/imx8mp-debix-io-board.dts#L1025


Christopher Obbard (1):
arm64: dts: imx8mp-debix-model-a: Add HDMI output support

.../dts/freescale/imx8mp-debix-model-a.dts | 47 +++++++++++++++++++
1 file changed, 47 insertions(+)

--
2.43.0