2024-04-17 18:04:18

by Aleksa Savic

[permalink] [raw]
Subject: [PATCH 0/2] hwmon: (aquacomputer_d5next) Support for Octo flow sensor and pulses

This patch series adds support for the flow sensor and flow sensor pulses
of the Aquacomputer Octo fan controller.

Aleksa Savic (2):
hwmon: (aquacomputer_d5next) Add support for Octo flow sensor
hwmon: (aquacomputer_d5next) Add support for Octo flow sensor pulses

Documentation/hwmon/aquacomputer_d5next.rst | 9 ++--
drivers/hwmon/aquacomputer_d5next.c | 51 ++++++++++++++-------
2 files changed, 39 insertions(+), 21 deletions(-)

--
2.44.0



2024-04-17 18:04:54

by Aleksa Savic

[permalink] [raw]
Subject: [PATCH 1/2] hwmon: (aquacomputer_d5next) Add support for Octo flow sensor

Add support for reading the flow sensor value on
the Aquacomputer Octo. Implemented by David Flemstrom [1].

[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/95

Originally-from: David Flemstrom <[email protected]>
Signed-off-by: Aleksa Savic <[email protected]>
---
Documentation/hwmon/aquacomputer_d5next.rst | 8 ++---
drivers/hwmon/aquacomputer_d5next.c | 34 +++++++++++++--------
2 files changed, 25 insertions(+), 17 deletions(-)

diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
index cb073c79479c..f84b6a5e4373 100644
--- a/Documentation/hwmon/aquacomputer_d5next.rst
+++ b/Documentation/hwmon/aquacomputer_d5next.rst
@@ -45,9 +45,9 @@ seems to require sending it a complete configuration. That includes addressable
RGB LEDs, for which there is no standard sysfs interface. Thus, that task is
better suited for userspace tools.

-The Octo exposes four physical and sixteen virtual temperature sensors, as well as
-eight PWM controllable fans, along with their speed (in RPM), power, voltage and
-current.
+The Octo exposes four physical and sixteen virtual temperature sensors, a flow sensor
+as well as eight PWM controllable fans, along with their speed (in RPM), power, voltage
+and current.

The Quadro exposes four physical and sixteen virtual temperature sensors, a flow
sensor and four PWM controllable fans, along with their speed (in RPM), power,
@@ -95,7 +95,7 @@ Sysfs entries
================ ==============================================================
temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius)
temp[1-8]_offset Temperature sensor correction offset (in millidegrees Celsius)
-fan[1-8]_input Pump/fan speed (in RPM) / Flow speed (in dL/h)
+fan[1-9]_input Pump/fan speed (in RPM) / Flow speed (in dL/h)
fan1_min Minimal fan speed (in RPM)
fan1_max Maximal fan speed (in RPM)
fan1_target Target fan speed (in RPM)
diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
index 2efe97f8d003..166044e01921 100644
--- a/drivers/hwmon/aquacomputer_d5next.c
+++ b/drivers/hwmon/aquacomputer_d5next.c
@@ -202,12 +202,14 @@ static u16 aquastreamult_sensor_fan_offsets[] = { AQUASTREAMULT_FAN_OFFSET };
#define OCTO_NUM_FANS 8
#define OCTO_NUM_SENSORS 4
#define OCTO_NUM_VIRTUAL_SENSORS 16
+#define OCTO_NUM_FLOW_SENSORS 1
#define OCTO_CTRL_REPORT_SIZE 0x65F

/* Sensor report offsets for the Octo */
#define OCTO_POWER_CYCLES 0x18
#define OCTO_SENSOR_START 0x3D
#define OCTO_VIRTUAL_SENSORS_START 0x45
+#define OCTO_FLOW_SENSOR_OFFSET 0x7B
static u16 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB, 0xD8 };

/* Control report offsets for the Octo */
@@ -363,18 +365,6 @@ static const char *const label_aquaero_calc_temp_sensors[] = {
"Calc. virtual sensor 4"
};

-/* Labels for Octo and Quadro (except speed) */
-static const char *const label_fan_speed[] = {
- "Fan 1 speed",
- "Fan 2 speed",
- "Fan 3 speed",
- "Fan 4 speed",
- "Fan 5 speed",
- "Fan 6 speed",
- "Fan 7 speed",
- "Fan 8 speed"
-};
-
static const char *const label_fan_power[] = {
"Fan 1 power",
"Fan 2 power",
@@ -408,6 +398,19 @@ static const char *const label_fan_current[] = {
"Fan 8 current"
};

+/* Labels for Octo fan speeds */
+static const char *const label_octo_speeds[] = {
+ "Fan 1 speed",
+ "Fan 2 speed",
+ "Fan 3 speed",
+ "Fan 4 speed",
+ "Fan 5 speed",
+ "Fan 6 speed",
+ "Fan 7 speed",
+ "Fan 8 speed",
+ "Flow speed [dL/h]",
+};
+
/* Labels for Quadro fan speeds */
static const char *const label_quadro_speeds[] = {
"Fan 1 speed",
@@ -844,6 +847,7 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
return 0444;
break;
case aquaero:
+ case octo:
case quadro:
case highflow:
/* Special case to support flow sensors */
@@ -1289,6 +1293,7 @@ static const struct hwmon_channel_info * const aqc_info[] = {
HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_PULSES,
HWMON_F_INPUT | HWMON_F_LABEL,
HWMON_F_INPUT | HWMON_F_LABEL,
+ HWMON_F_INPUT | HWMON_F_LABEL,
HWMON_F_INPUT | HWMON_F_LABEL),
HWMON_CHANNEL_INFO(power,
HWMON_P_INPUT | HWMON_P_LABEL,
@@ -1658,6 +1663,9 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->temp_sensor_start_offset = OCTO_SENSOR_START;
priv->num_virtual_temp_sensors = OCTO_NUM_VIRTUAL_SENSORS;
priv->virtual_temp_sensor_start_offset = OCTO_VIRTUAL_SENSORS_START;
+ priv->num_flow_sensors = OCTO_NUM_FLOW_SENSORS;
+ priv->flow_sensors_start_offset = OCTO_FLOW_SENSOR_OFFSET;
+
priv->temp_ctrl_offset = OCTO_TEMP_CTRL_OFFSET;

priv->buffer_size = OCTO_CTRL_REPORT_SIZE;
@@ -1667,7 +1675,7 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)

priv->temp_label = label_temp_sensors;
priv->virtual_temp_label = label_virtual_temp_sensors;
- priv->speed_label = label_fan_speed;
+ priv->speed_label = label_octo_speeds;
priv->power_label = label_fan_power;
priv->voltage_label = label_fan_voltage;
priv->current_label = label_fan_current;
--
2.44.0


2024-04-28 17:21:00

by Guenter Roeck

[permalink] [raw]
Subject: Re: [PATCH 1/2] hwmon: (aquacomputer_d5next) Add support for Octo flow sensor

On Wed, Apr 17, 2024 at 07:50:35PM +0200, Aleksa Savic wrote:
> Add support for reading the flow sensor value on
> the Aquacomputer Octo. Implemented by David Flemstrom [1].
>
> [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/95
>
> Originally-from: David Flemstrom <[email protected]>
> Signed-off-by: Aleksa Savic <[email protected]>

Applied.

Thanks,
Guenter

> ---
> Documentation/hwmon/aquacomputer_d5next.rst | 8 ++---
> drivers/hwmon/aquacomputer_d5next.c | 34 +++++++++++++--------
> 2 files changed, 25 insertions(+), 17 deletions(-)
>
> diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
> index cb073c79479c..f84b6a5e4373 100644
> --- a/Documentation/hwmon/aquacomputer_d5next.rst
> +++ b/Documentation/hwmon/aquacomputer_d5next.rst
> @@ -45,9 +45,9 @@ seems to require sending it a complete configuration. That includes addressable
> RGB LEDs, for which there is no standard sysfs interface. Thus, that task is
> better suited for userspace tools.
>
> -The Octo exposes four physical and sixteen virtual temperature sensors, as well as
> -eight PWM controllable fans, along with their speed (in RPM), power, voltage and
> -current.
> +The Octo exposes four physical and sixteen virtual temperature sensors, a flow sensor
> +as well as eight PWM controllable fans, along with their speed (in RPM), power, voltage
> +and current.
>
> The Quadro exposes four physical and sixteen virtual temperature sensors, a flow
> sensor and four PWM controllable fans, along with their speed (in RPM), power,
> @@ -95,7 +95,7 @@ Sysfs entries
> ================ ==============================================================
> temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius)
> temp[1-8]_offset Temperature sensor correction offset (in millidegrees Celsius)
> -fan[1-8]_input Pump/fan speed (in RPM) / Flow speed (in dL/h)
> +fan[1-9]_input Pump/fan speed (in RPM) / Flow speed (in dL/h)
> fan1_min Minimal fan speed (in RPM)
> fan1_max Maximal fan speed (in RPM)
> fan1_target Target fan speed (in RPM)
> diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
> index 2efe97f8d003..166044e01921 100644
> --- a/drivers/hwmon/aquacomputer_d5next.c
> +++ b/drivers/hwmon/aquacomputer_d5next.c
> @@ -202,12 +202,14 @@ static u16 aquastreamult_sensor_fan_offsets[] = { AQUASTREAMULT_FAN_OFFSET };
> #define OCTO_NUM_FANS 8
> #define OCTO_NUM_SENSORS 4
> #define OCTO_NUM_VIRTUAL_SENSORS 16
> +#define OCTO_NUM_FLOW_SENSORS 1
> #define OCTO_CTRL_REPORT_SIZE 0x65F
>
> /* Sensor report offsets for the Octo */
> #define OCTO_POWER_CYCLES 0x18
> #define OCTO_SENSOR_START 0x3D
> #define OCTO_VIRTUAL_SENSORS_START 0x45
> +#define OCTO_FLOW_SENSOR_OFFSET 0x7B
> static u16 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB, 0xD8 };
>
> /* Control report offsets for the Octo */
> @@ -363,18 +365,6 @@ static const char *const label_aquaero_calc_temp_sensors[] = {
> "Calc. virtual sensor 4"
> };
>
> -/* Labels for Octo and Quadro (except speed) */
> -static const char *const label_fan_speed[] = {
> - "Fan 1 speed",
> - "Fan 2 speed",
> - "Fan 3 speed",
> - "Fan 4 speed",
> - "Fan 5 speed",
> - "Fan 6 speed",
> - "Fan 7 speed",
> - "Fan 8 speed"
> -};
> -
> static const char *const label_fan_power[] = {
> "Fan 1 power",
> "Fan 2 power",
> @@ -408,6 +398,19 @@ static const char *const label_fan_current[] = {
> "Fan 8 current"
> };
>
> +/* Labels for Octo fan speeds */
> +static const char *const label_octo_speeds[] = {
> + "Fan 1 speed",
> + "Fan 2 speed",
> + "Fan 3 speed",
> + "Fan 4 speed",
> + "Fan 5 speed",
> + "Fan 6 speed",
> + "Fan 7 speed",
> + "Fan 8 speed",
> + "Flow speed [dL/h]",
> +};
> +
> /* Labels for Quadro fan speeds */
> static const char *const label_quadro_speeds[] = {
> "Fan 1 speed",
> @@ -844,6 +847,7 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
> return 0444;
> break;
> case aquaero:
> + case octo:
> case quadro:
> case highflow:
> /* Special case to support flow sensors */
> @@ -1289,6 +1293,7 @@ static const struct hwmon_channel_info * const aqc_info[] = {
> HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_PULSES,
> HWMON_F_INPUT | HWMON_F_LABEL,
> HWMON_F_INPUT | HWMON_F_LABEL,
> + HWMON_F_INPUT | HWMON_F_LABEL,
> HWMON_F_INPUT | HWMON_F_LABEL),
> HWMON_CHANNEL_INFO(power,
> HWMON_P_INPUT | HWMON_P_LABEL,
> @@ -1658,6 +1663,9 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
> priv->temp_sensor_start_offset = OCTO_SENSOR_START;
> priv->num_virtual_temp_sensors = OCTO_NUM_VIRTUAL_SENSORS;
> priv->virtual_temp_sensor_start_offset = OCTO_VIRTUAL_SENSORS_START;
> + priv->num_flow_sensors = OCTO_NUM_FLOW_SENSORS;
> + priv->flow_sensors_start_offset = OCTO_FLOW_SENSOR_OFFSET;
> +
> priv->temp_ctrl_offset = OCTO_TEMP_CTRL_OFFSET;
>
> priv->buffer_size = OCTO_CTRL_REPORT_SIZE;
> @@ -1667,7 +1675,7 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
>
> priv->temp_label = label_temp_sensors;
> priv->virtual_temp_label = label_virtual_temp_sensors;
> - priv->speed_label = label_fan_speed;
> + priv->speed_label = label_octo_speeds;
> priv->power_label = label_fan_power;
> priv->voltage_label = label_fan_voltage;
> priv->current_label = label_fan_current;