Enable the FastRPC and glink-edge nodes on MSM8996 platform. Tested on
APQ8096 Dragonboard820c.
Signed-off-by: Dmitry Baryshkov <[email protected]>
---
Changes in v2:
- Fixed order of compute nodes (Konrad)
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Dmitry Baryshkov (2):
dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996
arm64: dts: qcom: msm8996: add glink-edge nodes
Srinivas Kandagatla (1):
arm64: dts: msm8996: add fastrpc nodes
.../bindings/remoteproc/qcom,msm8996-mss-pil.yaml | 1 -
arch/arm64/boot/dts/qcom/msm8996.dtsi | 79 ++++++++++++++++++++++
2 files changed, 79 insertions(+), 1 deletion(-)
---
base-commit: 4eab358930711bbeb85bf5ee267d0d42d3394c2c
change-id: 20240320-msm8996-remoteproc-fccbc2b54ea1
Best regards,
--
Dmitry Baryshkov <[email protected]>
MSM8996 has limited glink support, allow glink-edge node on MSM8996
platform.
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
---
Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml | 1 -
1 file changed, 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml
index 971734085d51..4d2055f283ac 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml
@@ -231,7 +231,6 @@ allOf:
- const: snoc_axi
- const: mnoc_axi
- const: qdss
- glink-edge: false
required:
- pll-supply
- smd-edge
--
2.39.2
From: Srinivas Kandagatla <[email protected]>
The ADSP provides fastrpc/compute capabilities. Enable support for the
fastrpc on this DSP.
Signed-off-by: Srinivas Kandagatla <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 57 +++++++++++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 7ae499fa7d91..f9bbb191661b 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -3545,6 +3545,63 @@ q6routing: routing {
};
};
};
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,smd-channels = "fastrpcsmd-apps-dsp";
+ label = "adsp";
+ qcom,non-secure-domain;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&lpass_q6_smmu 5>;
+ };
+
+ cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&lpass_q6_smmu 6>;
+ };
+
+ cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+ iommus = <&lpass_q6_smmu 7>;
+ };
+
+ cb@8 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <8>;
+ iommus = <&lpass_q6_smmu 8>;
+ };
+
+ cb@9 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <9>;
+ iommus = <&lpass_q6_smmu 9>;
+ };
+
+ cb@10 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <10>;
+ iommus = <&lpass_q6_smmu 10>;
+ };
+
+ cb@11 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <11>;
+ iommus = <&lpass_q6_smmu 11>;
+ };
+
+ cb@12 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <12>;
+ iommus = <&lpass_q6_smmu 12>;
+ };
+ };
};
};
--
2.39.2
MSM8996 provides limited glink support, so add corresponding device tree
nodes. For example the following interfaces are provided on db820c:
modem:
2080000.remoteproc:glink-edge.LOOPBACK_CTL_MPSS.-1.-1
2080000.remoteproc:glink-edge.glink_ssr.-1.-1
2080000.remoteproc:glink-edge.rpmsg_chrdev.0.0
adsp:
9300000.remoteproc:glink-edge.LOOPBACK_CTL_LPASS.-1.-1
9300000.remoteproc:glink-edge.glink_ssr.-1.-1
9300000.remoteproc:glink-edge.rpmsg_chrdev.0.0
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 1601e46549e7..7ae499fa7d91 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2453,6 +2453,13 @@ slpi_pil: remoteproc@1c00000 {
status = "disabled";
+ glink-edge {
+ interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+ label = "dsps";
+ qcom,remote-pid = <3>;
+ mboxes = <&apcs_glb 27>;
+ };
+
smd-edge {
interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
@@ -2522,6 +2529,13 @@ metadata {
memory-region = <&mdata_mem>;
};
+ glink-edge {
+ interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
+ label = "modem";
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 15>;
+ };
+
smd-edge {
interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
@@ -3467,6 +3481,14 @@ adsp_pil: remoteproc@9300000 {
status = "disabled";
+ glink-edge {
+ interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ mboxes = <&apcs_glb 9>;
+ };
+
+
smd-edge {
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
--
2.39.2
On 18.04.2024 8:44 AM, Dmitry Baryshkov wrote:
> From: Srinivas Kandagatla <[email protected]>
>
> The ADSP provides fastrpc/compute capabilities. Enable support for the
> fastrpc on this DSP.
>
> Signed-off-by: Srinivas Kandagatla <[email protected]>
> Signed-off-by: Dmitry Baryshkov <[email protected]>
> ---
Reviewed-by: Konrad Dybcio <[email protected]>
Konrad
On Thu, 18 Apr 2024 09:44:19 +0300, Dmitry Baryshkov wrote:
> Enable the FastRPC and glink-edge nodes on MSM8996 platform. Tested on
> APQ8096 Dragonboard820c.
>
>
Applied, thanks!
[1/3] dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996
commit: a0acdef561d1699b020ab932a0edb556c4829533
Best regards,
--
Bjorn Andersson <[email protected]>
On Thu, 18 Apr 2024 09:44:19 +0300, Dmitry Baryshkov wrote:
> Enable the FastRPC and glink-edge nodes on MSM8996 platform. Tested on
> APQ8096 Dragonboard820c.
>
>
Applied, thanks!
[2/3] arm64: dts: qcom: msm8996: add glink-edge nodes
commit: 56ae780a4387d71dd709895acd95112d01f37fb4
[3/3] arm64: dts: msm8996: add fastrpc nodes
commit: 1b80b83f893dd69efe3c3bf84cd9f661218ccfc0
Best regards,
--
Bjorn Andersson <[email protected]>