2024-04-18 10:23:29

by Abel Vesa

Subject: [PATCH 2/3] arm64: dts: qcom: x1e80100-crd: Add data-lanes and link-frequencies to DP3

The data-lanes are a property of the out remote endpoint, so move them
from mdss_dp3 to the mdss_dp3_out. Also add the link-frequencies to
mdss_dp3_out and make sure to include all frequencies.

Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Signed-off-by: Abel Vesa <[email protected]>
---
arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index d4198fa204fd..c5c2895b37c7 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -599,8 +599,6 @@ &mdss_dp3 {
compatible = "qcom,x1e80100-dp";
/delete-property/ #sound-dai-cells;

- data-lanes = <0 1 2 3>;
-
status = "okay";

aux-bus {
@@ -620,6 +618,9 @@ ports {
port@1 {
reg = <1>;
mdss_dp3_out: endpoint {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
remote-endpoint = <&edp_panel_in>;
};
};

--
2.34.1

2024-04-18 10:42:54

by Konrad Dybcio

Subject: Re: [PATCH 2/3] arm64: dts: qcom: x1e80100-crd: Add data-lanes and link-frequencies to DP3

On 18.04.2024 12:22 PM, Abel Vesa wrote:
> The data-lanes are a property of the out remote endpoint, so move them
> from mdss_dp3 to the mdss_dp3_out. Also add the link-frequencies to
> mdss_dp3_out and make sure to include all frequencies.
>
> Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support")
> Signed-off-by: Abel Vesa <[email protected]>
> ---

Reviewed-by: Konrad Dybcio <[email protected]>

Konrad