2024-04-19 06:39:03

by Claudiu

[permalink] [raw]
Subject: [PATCH v4] pinctrl: renesas: rzg2l: Configure the interrupt type on resume

From: Claudiu Beznea <[email protected]>

Commit dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT
source at the same time") removed the setup of TINT from
rzg2l_irqc_irq_enable(). To address the spourious interrupt issue the setup
of TINT has been moved in rzg2l_tint_set_edge() though
rzg2l_disable_tint_and_set_tint_source(). With this, the interrupts are
not properly re-configured after a suspend-to-RAM cycle. To address
this issue and avoid spurious interrupts while resumming set the
interrupt type before enabling it.

Fixes: dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time")
Signed-off-by: Claudiu Beznea <[email protected]>
---

Changes in v4:
- moved dev_crit() out of critical section

Changes in v3:
- none; this patch was part of series at [1] and added in v3 of that
series

Changes in v2:
- none

[1] https://lore.kernel.org/all/[email protected]/

drivers/pinctrl/renesas/pinctrl-rzg2l.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 93916553bcc7..20425afc6b33 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -2045,7 +2045,9 @@ static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl)

for (unsigned int i = 0; i < RZG2L_TINT_MAX_INTERRUPT; i++) {
struct irq_data *data;
+ unsigned long flags;
unsigned int virq;
+ int ret;

if (!pctrl->hwirq[i])
continue;
@@ -2063,17 +2065,18 @@ static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl)
continue;
}

- if (!irqd_irq_disabled(data)) {
- unsigned long flags;
-
- /*
- * This has to be atomically executed to protect against a concurrent
- * interrupt.
- */
- raw_spin_lock_irqsave(&pctrl->lock.rlock, flags);
+ /*
+ * This has to be atomically executed to protect against a concurrent
+ * interrupt.
+ */
+ raw_spin_lock_irqsave(&pctrl->lock.rlock, flags);
+ ret = rzg2l_gpio_irq_set_type(data, irqd_get_trigger_type(data));
+ if (!ret && !irqd_irq_disabled(data))
rzg2l_gpio_irq_enable(data);
- raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags);
- }
+ raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags);
+
+ if (ret)
+ dev_crit(pctrl->dev, "Failed to set IRQ type for virq=%u\n", virq);
}
}

--
2.39.2



2024-04-19 07:52:35

by Geert Uytterhoeven

[permalink] [raw]
Subject: Re: [PATCH v4] pinctrl: renesas: rzg2l: Configure the interrupt type on resume

On Fri, Apr 19, 2024 at 8:38 AM Claudiu <[email protected]> wrote:
> From: Claudiu Beznea <[email protected]>
>
> Commit dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT
> source at the same time") removed the setup of TINT from
> rzg2l_irqc_irq_enable(). To address the spourious interrupt issue the setup
> of TINT has been moved in rzg2l_tint_set_edge() though
> rzg2l_disable_tint_and_set_tint_source(). With this, the interrupts are
> not properly re-configured after a suspend-to-RAM cycle. To address
> this issue and avoid spurious interrupts while resumming set the
> interrupt type before enabling it.
>
> Fixes: dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time")
> Signed-off-by: Claudiu Beznea <[email protected]>
> ---
>
> Changes in v4:
> - moved dev_crit() out of critical section

Reviewed-by: Geert Uytterhoeven <[email protected]>
i.e. will queue in renesas-pinctrl-fixes for v6.9.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68korg

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds