From: Heiko Stuebner <[email protected]>
The comment for the host2_xhci points to the wrong port on the board.
The upper usb3 port is the correct one, so fix the comment to prevent
confusion.
Signed-off-by: Heiko Stuebner <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts
index 9bdd14799eff..2aa43e7430e5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts
@@ -239,12 +239,12 @@ &uart5 {
status = "okay";
};
-/* host0 on Q7_USB_P2, lower usb3 port */
+/* host0 on Q7_USB_P2, upper usb3 port */
&usb_host0_ehci {
status = "okay";
};
-/* host0 on Q7_USB_P2, lower usb3 port */
+/* host0 on Q7_USB_P2, upper usb3 port */
&usb_host0_ohci {
status = "okay";
};
@@ -259,7 +259,7 @@ &usb_host1_ohci {
status = "okay";
};
-/* host2 on Q7_USB_P2, lower usb3 port */
+/* host2 on Q7_USB_P2, upper usb3 port */
&usb_host2_xhci {
status = "okay";
};
--
2.39.2