From: Doug Smythies <[email protected]>
[ Upstream commit e5f4e68eed85fa8495d78cd966eecc2b27bb9e53 ]
When using --Summary mode, added MSRs in raw mode always
print zeros. Print the actual register contents.
Example, with patch:
note the added column:
--add msr0x64f,u32,package,raw,REASON
Where:
0x64F is MSR_CORE_PERF_LIMIT_REASONS
Busy% Bzy_MHz PkgTmp PkgWatt CorWatt REASON
0.00 4800 35 1.42 0.76 0x00000000
0.00 4801 34 1.42 0.76 0x00000000
80.08 4531 66 108.17 107.52 0x08000000
98.69 4530 66 133.21 132.54 0x08000000
99.28 4505 66 128.26 127.60 0x0c000400
99.65 4486 68 124.91 124.25 0x0c000400
99.63 4483 68 124.90 124.25 0x0c000400
79.34 4481 41 99.80 99.13 0x0c000000
0.00 4801 41 1.40 0.73 0x0c000000
Where, for the test processor (i5-10600K):
PKG Limit #1: 125.000 Watts, 8.000000 sec
MSR bit 26 = log; bit 10 = status
PKG Limit #2: 136.000 Watts, 0.002441 sec
MSR bit 27 = log; bit 11 = status
Example, without patch:
Busy% Bzy_MHz PkgTmp PkgWatt CorWatt REASON
0.01 4800 35 1.43 0.77 0x00000000
0.00 4801 35 1.39 0.73 0x00000000
83.49 4531 66 112.71 112.06 0x00000000
98.69 4530 68 133.35 132.69 0x00000000
99.31 4500 67 127.96 127.30 0x00000000
99.63 4483 69 124.91 124.25 0x00000000
99.61 4481 69 124.90 124.25 0x00000000
99.61 4481 71 124.92 124.25 0x00000000
59.35 4479 42 75.03 74.37 0x00000000
0.00 4800 42 1.39 0.73 0x00000000
0.00 4801 42 1.42 0.76 0x00000000
c000000
[lenb: simplified patch to apply only to package scope]
Signed-off-by: Doug Smythies <[email protected]>
Signed-off-by: Len Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/power/x86/turbostat/turbostat.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 65ada8065cfc2..0822e7dc0fd8b 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -1761,9 +1761,10 @@ int sum_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
average.packages.rapl_dram_perf_status += p->rapl_dram_perf_status;
for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) {
- if (mp->format == FORMAT_RAW)
- continue;
- average.packages.counter[i] += p->counter[i];
+ if ((mp->format == FORMAT_RAW) && (topo.num_packages == 0))
+ average.packages.counter[i] = p->counter[i];
+ else
+ average.packages.counter[i] += p->counter[i];
}
return 0;
}
--
2.43.0
From: Thierry Reding <[email protected]>
[ Upstream commit 8ab58f6841b19423231c5db3378691ec80c778f8 ]
The host1x devices are virtual compound devices and do not perform DMA
accesses themselves, so they do not need to be set up for DMA.
Ideally we would also not need to set up DMA masks for the virtual
devices, but we currently still need those for legacy support on old
hardware.
Tested-by: Jon Hunter <[email protected]>
Acked-by: Jon Hunter <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/host1x/bus.c | 8 --------
1 file changed, 8 deletions(-)
diff --git a/drivers/gpu/host1x/bus.c b/drivers/gpu/host1x/bus.c
index 218e3718fd68c..96737ddc81209 100644
--- a/drivers/gpu/host1x/bus.c
+++ b/drivers/gpu/host1x/bus.c
@@ -367,11 +367,6 @@ static int host1x_device_uevent(struct device *dev,
return 0;
}
-static int host1x_dma_configure(struct device *dev)
-{
- return of_dma_configure(dev, dev->of_node, true);
-}
-
static const struct dev_pm_ops host1x_device_pm_ops = {
.suspend = pm_generic_suspend,
.resume = pm_generic_resume,
@@ -385,7 +380,6 @@ struct bus_type host1x_bus_type = {
.name = "host1x",
.match = host1x_device_match,
.uevent = host1x_device_uevent,
- .dma_configure = host1x_dma_configure,
.pm = &host1x_device_pm_ops,
};
@@ -474,8 +468,6 @@ static int host1x_device_add(struct host1x *host1x,
device->dev.bus = &host1x_bus_type;
device->dev.parent = host1x->dev;
- of_dma_configure(&device->dev, host1x->dev->of_node, true);
-
device->dev.dma_parms = &device->dma_parms;
dma_set_max_seg_size(&device->dev, UINT_MAX);
--
2.43.0
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 7537e31df80cb58c27f3b6fef702534ea87a5957 ]
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/mtk_iommu.c | 1 +
drivers/iommu/mtk_iommu_v1.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 2ae46fa6b3dee..04ac40d11fdff 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -1101,6 +1101,7 @@ static const struct of_device_id mtk_iommu_of_ids[] = {
{ .compatible = "mediatek,mt8192-m4u", .data = &mt8192_data},
{}
};
+MODULE_DEVICE_TABLE(of, mtk_iommu_of_ids);
static struct platform_driver mtk_iommu_driver = {
.probe = mtk_iommu_probe,
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index fe1c3123a7e77..3a52f6a6ecb32 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -576,6 +576,7 @@ static const struct of_device_id mtk_iommu_of_ids[] = {
{ .compatible = "mediatek,mt2701-m4u", },
{}
};
+MODULE_DEVICE_TABLE(of, mtk_iommu_v1_of_ids);
static const struct component_master_ops mtk_iommu_com_ops = {
.bind = mtk_iommu_bind,
--
2.43.0
From: Jiaxun Yang <[email protected]>
[ Upstream commit 4370b673ccf240bf7587b0cb8e6726a5ccaf1f17 ]
thread_info.syscall is used by syscall_get_nr to supply syscall nr
over a thread stack frame.
Previously, thread_info.syscall is only saved at syscall_trace_enter
when syscall tracing is enabled. However rest of the kernel code do
expect syscall_get_nr to be available without syscall tracing. The
previous design breaks collect_syscall.
Move saving process to syscall entry to fix it.
Reported-by: Xi Ruoyao <[email protected]>
Link: https://github.com/util-linux/util-linux/issues/2867
Signed-off-by: Jiaxun Yang <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/include/asm/ptrace.h | 2 +-
arch/mips/kernel/asm-offsets.c | 1 +
arch/mips/kernel/ptrace.c | 15 ++++++---------
arch/mips/kernel/scall32-o32.S | 23 +++++++++++++----------
arch/mips/kernel/scall64-n32.S | 3 ++-
arch/mips/kernel/scall64-n64.S | 3 ++-
arch/mips/kernel/scall64-o32.S | 33 +++++++++++++++++----------------
7 files changed, 42 insertions(+), 38 deletions(-)
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index b3e4dd6be7e20..428b9f1cf1de2 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -157,7 +157,7 @@ static inline long regs_return_value(struct pt_regs *regs)
#define instruction_pointer(regs) ((regs)->cp0_epc)
#define profile_pc(regs) instruction_pointer(regs)
-extern asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall);
+extern asmlinkage long syscall_trace_enter(struct pt_regs *regs);
extern asmlinkage void syscall_trace_leave(struct pt_regs *regs);
extern void die(const char *, struct pt_regs *) __noreturn;
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index 04ca75278f023..6cd0246aa2c69 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -98,6 +98,7 @@ void output_thread_info_defines(void)
OFFSET(TI_CPU, thread_info, cpu);
OFFSET(TI_PRE_COUNT, thread_info, preempt_count);
OFFSET(TI_REGS, thread_info, regs);
+ OFFSET(TI_SYSCALL, thread_info, syscall);
DEFINE(_THREAD_SIZE, THREAD_SIZE);
DEFINE(_THREAD_MASK, THREAD_MASK);
DEFINE(_IRQ_STACK_SIZE, IRQ_STACK_SIZE);
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index db7c5be1d4a35..dd454b429ff73 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -1310,16 +1310,13 @@ long arch_ptrace(struct task_struct *child, long request,
* Notification of system call entry/exit
* - triggered by current->work.syscall_trace
*/
-asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
+asmlinkage long syscall_trace_enter(struct pt_regs *regs)
{
user_exit();
- current_thread_info()->syscall = syscall;
-
if (test_thread_flag(TIF_SYSCALL_TRACE)) {
if (tracehook_report_syscall_entry(regs))
return -1;
- syscall = current_thread_info()->syscall;
}
#ifdef CONFIG_SECCOMP
@@ -1328,7 +1325,7 @@ asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
struct seccomp_data sd;
unsigned long args[6];
- sd.nr = syscall;
+ sd.nr = current_thread_info()->syscall;
sd.arch = syscall_get_arch(current);
syscall_get_arguments(current, regs, args);
for (i = 0; i < 6; i++)
@@ -1338,23 +1335,23 @@ asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
ret = __secure_computing(&sd);
if (ret == -1)
return ret;
- syscall = current_thread_info()->syscall;
}
#endif
if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
trace_sys_enter(regs, regs->regs[2]);
- audit_syscall_entry(syscall, regs->regs[4], regs->regs[5],
+ audit_syscall_entry(current_thread_info()->syscall,
+ regs->regs[4], regs->regs[5],
regs->regs[6], regs->regs[7]);
/*
* Negative syscall numbers are mistaken for rejected syscalls, but
* won't have had the return value set appropriately, so we do so now.
*/
- if (syscall < 0)
+ if (current_thread_info()->syscall < 0)
syscall_set_return_value(current, regs, -ENOSYS, 0);
- return syscall;
+ return current_thread_info()->syscall;
}
/*
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 9bfce5f75f601..6c14160cd8ba7 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -78,6 +78,18 @@ loads_done:
PTR_WD load_a7, bad_stack_a7
.previous
+ /*
+ * syscall number is in v0 unless we called syscall(__NR_###)
+ * where the real syscall number is in a0
+ */
+ subu t2, v0, __NR_O32_Linux
+ bnez t2, 1f /* __NR_syscall at offset 0 */
+ LONG_S a0, TI_SYSCALL($28) # Save a0 as syscall number
+ b 2f
+1:
+ LONG_S v0, TI_SYSCALL($28) # Save v0 as syscall number
+2:
+
lw t0, TI_FLAGS($28) # syscall tracing enabled?
li t1, _TIF_WORK_SYSCALL_ENTRY
and t0, t1
@@ -115,16 +127,7 @@ syscall_trace_entry:
SAVE_STATIC
move a0, sp
- /*
- * syscall number is in v0 unless we called syscall(__NR_###)
- * where the real syscall number is in a0
- */
- move a1, v0
- subu t2, v0, __NR_O32_Linux
- bnez t2, 1f /* __NR_syscall at offset 0 */
- lw a1, PT_R4(sp)
-
-1: jal syscall_trace_enter
+ jal syscall_trace_enter
bltz v0, 1f # seccomp failed? Skip syscall
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 97456b2ca7dc3..97788859238c3 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -44,6 +44,8 @@ NESTED(handle_sysn32, PT_SIZE, sp)
sd a3, PT_R26(sp) # save a3 for syscall restarting
+ LONG_S v0, TI_SYSCALL($28) # Store syscall number
+
li t1, _TIF_WORK_SYSCALL_ENTRY
LONG_L t0, TI_FLAGS($28) # syscall tracing enabled?
and t0, t1, t0
@@ -72,7 +74,6 @@ syscall_common:
n32_syscall_trace_entry:
SAVE_STATIC
move a0, sp
- move a1, v0
jal syscall_trace_enter
bltz v0, 1f # seccomp failed? Skip syscall
diff --git a/arch/mips/kernel/scall64-n64.S b/arch/mips/kernel/scall64-n64.S
index 5f6ed4b4c3993..db58115385639 100644
--- a/arch/mips/kernel/scall64-n64.S
+++ b/arch/mips/kernel/scall64-n64.S
@@ -47,6 +47,8 @@ NESTED(handle_sys64, PT_SIZE, sp)
sd a3, PT_R26(sp) # save a3 for syscall restarting
+ LONG_S v0, TI_SYSCALL($28) # Store syscall number
+
li t1, _TIF_WORK_SYSCALL_ENTRY
LONG_L t0, TI_FLAGS($28) # syscall tracing enabled?
and t0, t1, t0
@@ -83,7 +85,6 @@ n64_syscall_exit:
syscall_trace_entry:
SAVE_STATIC
move a0, sp
- move a1, v0
jal syscall_trace_enter
bltz v0, 1f # seccomp failed? Skip syscall
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index d3c2616cba226..7a5abb73e5312 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -79,6 +79,22 @@ loads_done:
PTR_WD load_a7, bad_stack_a7
.previous
+ /*
+ * absolute syscall number is in v0 unless we called syscall(__NR_###)
+ * where the real syscall number is in a0
+ * note: NR_syscall is the first O32 syscall but the macro is
+ * only defined when compiling with -mabi=32 (CONFIG_32BIT)
+ * therefore __NR_O32_Linux is used (4000)
+ */
+
+ subu t2, v0, __NR_O32_Linux
+ bnez t2, 1f /* __NR_syscall at offset 0 */
+ LONG_S a0, TI_SYSCALL($28) # Save a0 as syscall number
+ b 2f
+1:
+ LONG_S v0, TI_SYSCALL($28) # Save v0 as syscall number
+2:
+
li t1, _TIF_WORK_SYSCALL_ENTRY
LONG_L t0, TI_FLAGS($28) # syscall tracing enabled?
and t0, t1, t0
@@ -113,22 +129,7 @@ trace_a_syscall:
sd a7, PT_R11(sp) # For indirect syscalls
move a0, sp
- /*
- * absolute syscall number is in v0 unless we called syscall(__NR_###)
- * where the real syscall number is in a0
- * note: NR_syscall is the first O32 syscall but the macro is
- * only defined when compiling with -mabi=32 (CONFIG_32BIT)
- * therefore __NR_O32_Linux is used (4000)
- */
- .set push
- .set reorder
- subu t1, v0, __NR_O32_Linux
- move a1, v0
- bnez t1, 1f /* __NR_syscall at offset 0 */
- ld a1, PT_R4(sp) /* Arg1 for __NR_syscall case */
- .set pop
-
-1: jal syscall_trace_enter
+ jal syscall_trace_enter
bltz v0, 1f # seccomp failed? Skip syscall
--
2.43.0
From: Maurizio Lombardi <[email protected]>
[ Upstream commit 97a54ef596c3fd24ec2b227ba8aaf2cf5415e779 ]
If the systemd-modules service loads the target module, the credentials of
that userspace process will be used to validate the access to the target db
directory. SELinux will prevent it, reporting an error like the following:
kernel: audit: type=1400 audit(1676301082.205:4): avc: denied { read }
for pid=1020 comm="systemd-modules" name="target" dev="dm-3"
ino=4657583 scontext=system_u:system_r:systemd_modules_load_t:s0
tcontext=system_u:object_r:targetd_etc_rw_t:s0 tclass=dir permissive=0
Fix the error by using the kernel credentials to access the db directory
Signed-off-by: Maurizio Lombardi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/target/target_core_configfs.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c
index 023bd4516a681..30ce3451bc6b0 100644
--- a/drivers/target/target_core_configfs.c
+++ b/drivers/target/target_core_configfs.c
@@ -3566,6 +3566,8 @@ static int __init target_core_init_configfs(void)
{
struct configfs_subsystem *subsys = &target_core_fabrics;
struct t10_alua_lu_gp *lu_gp;
+ struct cred *kern_cred;
+ const struct cred *old_cred;
int ret;
pr_debug("TARGET_CORE[0]: Loading Generic Kernel Storage"
@@ -3642,11 +3644,21 @@ static int __init target_core_init_configfs(void)
if (ret < 0)
goto out;
+ /* We use the kernel credentials to access the target directory */
+ kern_cred = prepare_kernel_cred(&init_task);
+ if (!kern_cred) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ old_cred = override_creds(kern_cred);
target_init_dbroot();
+ revert_creds(old_cred);
+ put_cred(kern_cred);
return 0;
out:
+ target_xcopy_release_pt();
configfs_unregister_subsystem(subsys);
core_dev_release_virtual_lun0();
rd_module_exit();
--
2.43.0
From: Boris Burkov <[email protected]>
[ Upstream commit 6e68de0bb0ed59e0554a0c15ede7308c47351e2d ]
It is possible to clear a root's IN_TRANS tag from the radix tree, but
not clear its PERTRANS, if there is some error in between. Eliminate
that possibility by moving the free up to where we clear the tag.
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Boris Burkov <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/transaction.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 99cdd1d6a4bf8..a9b794c47159f 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -1424,6 +1424,7 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
radix_tree_tag_clear(&fs_info->fs_roots_radix,
(unsigned long)root->root_key.objectid,
BTRFS_ROOT_TRANS_TAG);
+ btrfs_qgroup_free_meta_all_pertrans(root);
spin_unlock(&fs_info->fs_roots_radix_lock);
btrfs_free_log(trans, root);
@@ -1448,7 +1449,6 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
if (ret2)
return ret2;
spin_lock(&fs_info->fs_roots_radix_lock);
- btrfs_qgroup_free_meta_all_pertrans(root);
}
}
spin_unlock(&fs_info->fs_roots_radix_lock);
--
2.43.0
From: John Stultz <[email protected]>
[ Upstream commit 076361362122a6d8a4c45f172ced5576b2d4a50d ]
The struct adjtimex freq field takes a signed value who's units are in
shifted (<<16) parts-per-million.
Unfortunately for negative adjustments, the straightforward use of:
freq = ppm << 16 trips undefined behavior warnings with clang:
valid-adjtimex.c:66:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
-499<<16,
~~~~^
valid-adjtimex.c:67:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
-450<<16,
~~~~^
.
Fix it by using a multiply by (1 << 16) instead of shifting negative values
in the valid-adjtimex test case. Align the values for better readability.
Reported-by: Lee Jones <[email protected]>
Reported-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: John Stultz <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Sasha Levin <[email protected]>
---
.../testing/selftests/timers/valid-adjtimex.c | 73 +++++++++----------
1 file changed, 36 insertions(+), 37 deletions(-)
diff --git a/tools/testing/selftests/timers/valid-adjtimex.c b/tools/testing/selftests/timers/valid-adjtimex.c
index 48b9a803235a8..d13ebde203221 100644
--- a/tools/testing/selftests/timers/valid-adjtimex.c
+++ b/tools/testing/selftests/timers/valid-adjtimex.c
@@ -21,9 +21,6 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-
-
-
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
@@ -62,45 +59,47 @@ int clear_time_state(void)
#define NUM_FREQ_OUTOFRANGE 4
#define NUM_FREQ_INVALID 2
+#define SHIFTED_PPM (1 << 16)
+
long valid_freq[NUM_FREQ_VALID] = {
- -499<<16,
- -450<<16,
- -400<<16,
- -350<<16,
- -300<<16,
- -250<<16,
- -200<<16,
- -150<<16,
- -100<<16,
- -75<<16,
- -50<<16,
- -25<<16,
- -10<<16,
- -5<<16,
- -1<<16,
+ -499 * SHIFTED_PPM,
+ -450 * SHIFTED_PPM,
+ -400 * SHIFTED_PPM,
+ -350 * SHIFTED_PPM,
+ -300 * SHIFTED_PPM,
+ -250 * SHIFTED_PPM,
+ -200 * SHIFTED_PPM,
+ -150 * SHIFTED_PPM,
+ -100 * SHIFTED_PPM,
+ -75 * SHIFTED_PPM,
+ -50 * SHIFTED_PPM,
+ -25 * SHIFTED_PPM,
+ -10 * SHIFTED_PPM,
+ -5 * SHIFTED_PPM,
+ -1 * SHIFTED_PPM,
-1000,
- 1<<16,
- 5<<16,
- 10<<16,
- 25<<16,
- 50<<16,
- 75<<16,
- 100<<16,
- 150<<16,
- 200<<16,
- 250<<16,
- 300<<16,
- 350<<16,
- 400<<16,
- 450<<16,
- 499<<16,
+ 1 * SHIFTED_PPM,
+ 5 * SHIFTED_PPM,
+ 10 * SHIFTED_PPM,
+ 25 * SHIFTED_PPM,
+ 50 * SHIFTED_PPM,
+ 75 * SHIFTED_PPM,
+ 100 * SHIFTED_PPM,
+ 150 * SHIFTED_PPM,
+ 200 * SHIFTED_PPM,
+ 250 * SHIFTED_PPM,
+ 300 * SHIFTED_PPM,
+ 350 * SHIFTED_PPM,
+ 400 * SHIFTED_PPM,
+ 450 * SHIFTED_PPM,
+ 499 * SHIFTED_PPM,
};
long outofrange_freq[NUM_FREQ_OUTOFRANGE] = {
- -1000<<16,
- -550<<16,
- 550<<16,
- 1000<<16,
+ -1000 * SHIFTED_PPM,
+ -550 * SHIFTED_PPM,
+ 550 * SHIFTED_PPM,
+ 1000 * SHIFTED_PPM,
};
#define LONG_MAX (~0UL>>1)
--
2.43.0