On several Qualcomm platforms DisplayPort link clocks used incorrect
frequency tables. Drop frequency tables and use clk_byte2_ops instead of
clk_rcg2_ops.
Note, this was tested on SM8450 only and then extended to other
platforms.
Signed-off-by: Dmitry Baryshkov <[email protected]>
---
Changes in v2:
- Expanded commit messages to mention exact issue being fixed and the
triggering message (Stephen Boyd, Bjorn)
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Dmitry Baryshkov (4):
clk: qcom: dispcc-sm8450: fix DisplayPort clocks
clk: qcom: dispcc-sm6350: fix DisplayPort clocks
clk: qcom: dispcc-sm8550: fix DisplayPort clocks
clk: qcom: dispcc-sm8650: fix DisplayPort clocks
drivers/clk/qcom/dispcc-sm6350.c | 11 +----------
drivers/clk/qcom/dispcc-sm8450.c | 20 ++++----------------
drivers/clk/qcom/dispcc-sm8550.c | 20 ++++----------------
drivers/clk/qcom/dispcc-sm8650.c | 20 ++++----------------
4 files changed, 13 insertions(+), 58 deletions(-)
---
base-commit: a59668a9397e7245b26e9be85d23f242ff757ae8
change-id: 20240408-dispcc-dp-clocks-5ee5d5926346
Best regards,
--
Dmitry Baryshkov <[email protected]>
On SM6350 DisplayPort link clocks use frequency tables inherited from
the vendor kernel, it is not applicable in the upstream kernel. Drop
frequency tables and use clk_byte2_ops for those clocks.
This fixes frequency selection in the OPP core (which otherwise attempts
to use invalid 810 KHz as DP link rate), also fixing the following
message:
msm-dp-display ae90000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22
Fixes: 837519775f1d ("clk: qcom: Add display clock controller driver for SM6350")
Reviewed-by: Neil Armstrong <[email protected]>
Tested-by: Luca Weiss <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
---
drivers/clk/qcom/dispcc-sm6350.c | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/drivers/clk/qcom/dispcc-sm6350.c b/drivers/clk/qcom/dispcc-sm6350.c
index 839435362010..e4b7464c4d0e 100644
--- a/drivers/clk/qcom/dispcc-sm6350.c
+++ b/drivers/clk/qcom/dispcc-sm6350.c
@@ -221,26 +221,17 @@ static struct clk_rcg2 disp_cc_mdss_dp_crypto_clk_src = {
},
};
-static const struct freq_tbl ftbl_disp_cc_mdss_dp_link_clk_src[] = {
- F(162000, P_DP_PHY_PLL_LINK_CLK, 1, 0, 0),
- F(270000, P_DP_PHY_PLL_LINK_CLK, 1, 0, 0),
- F(540000, P_DP_PHY_PLL_LINK_CLK, 1, 0, 0),
- F(810000, P_DP_PHY_PLL_LINK_CLK, 1, 0, 0),
- { }
-};
-
static struct clk_rcg2 disp_cc_mdss_dp_link_clk_src = {
.cmd_rcgr = 0x10f8,
.mnd_width = 0,
.hid_width = 5,
.parent_map = disp_cc_parent_map_0,
- .freq_tbl = ftbl_disp_cc_mdss_dp_link_clk_src,
.clkr.hw.init = &(struct clk_init_data){
.name = "disp_cc_mdss_dp_link_clk_src",
.parent_data = disp_cc_parent_data_0,
.num_parents = ARRAY_SIZE(disp_cc_parent_data_0),
.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_byte2_ops,
},
};
--
2.39.2
On SM8550 DisplayPort link clocks use frequency tables inherited from
the vendor kernel, it is not applicable in the upstream kernel. Drop
frequency tables and use clk_byte2_ops for those clocks.
This fixes frequency selection in the OPP core (which otherwise attempts
to use invalid 810 KHz as DP link rate), also fixing the following
message:
msm-dp-display ae90000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22
Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver")
Reviewed-by: Neil Armstrong <[email protected]>
Tested-by: Neil Armstrong <[email protected]> # on SM8550-HDK
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
---
drivers/clk/qcom/dispcc-sm8550.c | 20 ++++----------------
1 file changed, 4 insertions(+), 16 deletions(-)
diff --git a/drivers/clk/qcom/dispcc-sm8550.c b/drivers/clk/qcom/dispcc-sm8550.c
index 3672c73ac11c..38ecea805503 100644
--- a/drivers/clk/qcom/dispcc-sm8550.c
+++ b/drivers/clk/qcom/dispcc-sm8550.c
@@ -345,26 +345,17 @@ static struct clk_rcg2 disp_cc_mdss_dptx0_aux_clk_src = {
},
};
-static const struct freq_tbl ftbl_disp_cc_mdss_dptx0_link_clk_src[] = {
- F(162000, P_DP0_PHY_PLL_LINK_CLK, 1, 0, 0),
- F(270000, P_DP0_PHY_PLL_LINK_CLK, 1, 0, 0),
- F(540000, P_DP0_PHY_PLL_LINK_CLK, 1, 0, 0),
- F(810000, P_DP0_PHY_PLL_LINK_CLK, 1, 0, 0),
- { }
-};
-
static struct clk_rcg2 disp_cc_mdss_dptx0_link_clk_src = {
.cmd_rcgr = 0x8170,
.mnd_width = 0,
.hid_width = 5,
.parent_map = disp_cc_parent_map_7,
- .freq_tbl = ftbl_disp_cc_mdss_dptx0_link_clk_src,
.clkr.hw.init = &(struct clk_init_data) {
.name = "disp_cc_mdss_dptx0_link_clk_src",
.parent_data = disp_cc_parent_data_7,
.num_parents = ARRAY_SIZE(disp_cc_parent_data_7),
.flags = CLK_SET_RATE_PARENT,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_byte2_ops,
},
};
@@ -418,13 +409,12 @@ static struct clk_rcg2 disp_cc_mdss_dptx1_link_clk_src = {
.mnd_width = 0,
.hid_width = 5,
.parent_map = disp_cc_parent_map_3,
- .freq_tbl = ftbl_disp_cc_mdss_dptx0_link_clk_src,
.clkr.hw.init = &(struct clk_init_data) {
.name = "disp_cc_mdss_dptx1_link_clk_src",
.parent_data = disp_cc_parent_data_3,
.num_parents = ARRAY_SIZE(disp_cc_parent_data_3),
.flags = CLK_SET_RATE_PARENT,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_byte2_ops,
},
};
@@ -478,13 +468,12 @@ static struct clk_rcg2 disp_cc_mdss_dptx2_link_clk_src = {
.mnd_width = 0,
.hid_width = 5,
.parent_map = disp_cc_parent_map_3,
- .freq_tbl = ftbl_disp_cc_mdss_dptx0_link_clk_src,
.clkr.hw.init = &(struct clk_init_data) {
.name = "disp_cc_mdss_dptx2_link_clk_src",
.parent_data = disp_cc_parent_data_3,
.num_parents = ARRAY_SIZE(disp_cc_parent_data_3),
.flags = CLK_SET_RATE_PARENT,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_byte2_ops,
},
};
@@ -538,13 +527,12 @@ static struct clk_rcg2 disp_cc_mdss_dptx3_link_clk_src = {
.mnd_width = 0,
.hid_width = 5,
.parent_map = disp_cc_parent_map_3,
- .freq_tbl = ftbl_disp_cc_mdss_dptx0_link_clk_src,
.clkr.hw.init = &(struct clk_init_data) {
.name = "disp_cc_mdss_dptx3_link_clk_src",
.parent_data = disp_cc_parent_data_3,
.num_parents = ARRAY_SIZE(disp_cc_parent_data_3),
.flags = CLK_SET_RATE_PARENT,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_byte2_ops,
},
};
--
2.39.2
On SM8450 DisplayPort link clocks use frequency tables inherited from
the vendor kernel, it is not applicable in the upstream kernel. Drop
frequency tables and use clk_byte2_ops for those clocks.
This fixes frequency selection in the OPP core (which otherwise attempts
to use invalid 810 KHz as DP link rate), also fixing the following
message:
msm-dp-display ae90000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22
Fixes: 16fb89f92ec4 ("clk: qcom: Add support for Display Clock Controller on SM8450")
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
---
drivers/clk/qcom/dispcc-sm8450.c | 20 ++++----------------
1 file changed, 4 insertions(+), 16 deletions(-)
diff --git a/drivers/clk/qcom/dispcc-sm8450.c b/drivers/clk/qcom/dispcc-sm8450.c
index 92e9c4e7b13d..49bb4f58c391 100644
--- a/drivers/clk/qcom/dispcc-sm8450.c
+++ b/drivers/clk/qcom/dispcc-sm8450.c
@@ -309,26 +309,17 @@ static struct clk_rcg2 disp_cc_mdss_dptx0_aux_clk_src = {
},
};
-static const struct freq_tbl ftbl_disp_cc_mdss_dptx0_link_clk_src[] = {
- F(162000, P_DP0_PHY_PLL_LINK_CLK, 1, 0, 0),
- F(270000, P_DP0_PHY_PLL_LINK_CLK, 1, 0, 0),
- F(540000, P_DP0_PHY_PLL_LINK_CLK, 1, 0, 0),
- F(810000, P_DP0_PHY_PLL_LINK_CLK, 1, 0, 0),
- { }
-};
-
static struct clk_rcg2 disp_cc_mdss_dptx0_link_clk_src = {
.cmd_rcgr = 0x819c,
.mnd_width = 0,
.hid_width = 5,
.parent_map = disp_cc_parent_map_3,
- .freq_tbl = ftbl_disp_cc_mdss_dptx0_link_clk_src,
.clkr.hw.init = &(struct clk_init_data) {
.name = "disp_cc_mdss_dptx0_link_clk_src",
.parent_data = disp_cc_parent_data_3,
.num_parents = ARRAY_SIZE(disp_cc_parent_data_3),
.flags = CLK_SET_RATE_PARENT,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_byte2_ops,
},
};
@@ -382,13 +373,12 @@ static struct clk_rcg2 disp_cc_mdss_dptx1_link_clk_src = {
.mnd_width = 0,
.hid_width = 5,
.parent_map = disp_cc_parent_map_3,
- .freq_tbl = ftbl_disp_cc_mdss_dptx0_link_clk_src,
.clkr.hw.init = &(struct clk_init_data) {
.name = "disp_cc_mdss_dptx1_link_clk_src",
.parent_data = disp_cc_parent_data_3,
.num_parents = ARRAY_SIZE(disp_cc_parent_data_3),
.flags = CLK_SET_RATE_PARENT,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_byte2_ops,
},
};
@@ -442,13 +432,12 @@ static struct clk_rcg2 disp_cc_mdss_dptx2_link_clk_src = {
.mnd_width = 0,
.hid_width = 5,
.parent_map = disp_cc_parent_map_3,
- .freq_tbl = ftbl_disp_cc_mdss_dptx0_link_clk_src,
.clkr.hw.init = &(struct clk_init_data) {
.name = "disp_cc_mdss_dptx2_link_clk_src",
.parent_data = disp_cc_parent_data_3,
.num_parents = ARRAY_SIZE(disp_cc_parent_data_3),
.flags = CLK_SET_RATE_PARENT,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_byte2_ops,
},
};
@@ -502,13 +491,12 @@ static struct clk_rcg2 disp_cc_mdss_dptx3_link_clk_src = {
.mnd_width = 0,
.hid_width = 5,
.parent_map = disp_cc_parent_map_3,
- .freq_tbl = ftbl_disp_cc_mdss_dptx0_link_clk_src,
.clkr.hw.init = &(struct clk_init_data) {
.name = "disp_cc_mdss_dptx3_link_clk_src",
.parent_data = disp_cc_parent_data_3,
.num_parents = ARRAY_SIZE(disp_cc_parent_data_3),
.flags = CLK_SET_RATE_PARENT,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_byte2_ops,
},
};
--
2.39.2
On SM8650 DisplayPort link clocks use frequency tables inherited from
the vendor kernel, it is not applicable in the upstream kernel. Drop
frequency tables and use clk_byte2_ops for those clocks.
This fixes frequency selection in the OPP core (which otherwise attempts
to use invalid 810 KHz as DP link rate), also fixing the following
message:
msm-dp-display af54000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22
Fixes: 9e939f008338 ("clk: qcom: add the SM8650 Display Clock Controller driver")
Reviewed-by: Neil Armstrong <[email protected]>
Tested-by: Neil Armstrong <[email protected]> # on SM8650-HDK
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
---
drivers/clk/qcom/dispcc-sm8650.c | 20 ++++----------------
1 file changed, 4 insertions(+), 16 deletions(-)
diff --git a/drivers/clk/qcom/dispcc-sm8650.c b/drivers/clk/qcom/dispcc-sm8650.c
index 9539db0d9114..3eb64bcad487 100644
--- a/drivers/clk/qcom/dispcc-sm8650.c
+++ b/drivers/clk/qcom/dispcc-sm8650.c
@@ -343,26 +343,17 @@ static struct clk_rcg2 disp_cc_mdss_dptx0_aux_clk_src = {
},
};
-static const struct freq_tbl ftbl_disp_cc_mdss_dptx0_link_clk_src[] = {
- F(162000, P_DP0_PHY_PLL_LINK_CLK, 1, 0, 0),
- F(270000, P_DP0_PHY_PLL_LINK_CLK, 1, 0, 0),
- F(540000, P_DP0_PHY_PLL_LINK_CLK, 1, 0, 0),
- F(810000, P_DP0_PHY_PLL_LINK_CLK, 1, 0, 0),
- { }
-};
-
static struct clk_rcg2 disp_cc_mdss_dptx0_link_clk_src = {
.cmd_rcgr = 0x8170,
.mnd_width = 0,
.hid_width = 5,
.parent_map = disp_cc_parent_map_7,
- .freq_tbl = ftbl_disp_cc_mdss_dptx0_link_clk_src,
.clkr.hw.init = &(const struct clk_init_data) {
.name = "disp_cc_mdss_dptx0_link_clk_src",
.parent_data = disp_cc_parent_data_7,
.num_parents = ARRAY_SIZE(disp_cc_parent_data_7),
.flags = CLK_SET_RATE_PARENT,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_byte2_ops,
},
};
@@ -416,13 +407,12 @@ static struct clk_rcg2 disp_cc_mdss_dptx1_link_clk_src = {
.mnd_width = 0,
.hid_width = 5,
.parent_map = disp_cc_parent_map_3,
- .freq_tbl = ftbl_disp_cc_mdss_dptx0_link_clk_src,
.clkr.hw.init = &(const struct clk_init_data) {
.name = "disp_cc_mdss_dptx1_link_clk_src",
.parent_data = disp_cc_parent_data_3,
.num_parents = ARRAY_SIZE(disp_cc_parent_data_3),
.flags = CLK_SET_RATE_PARENT,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_byte2_ops,
},
};
@@ -476,13 +466,12 @@ static struct clk_rcg2 disp_cc_mdss_dptx2_link_clk_src = {
.mnd_width = 0,
.hid_width = 5,
.parent_map = disp_cc_parent_map_3,
- .freq_tbl = ftbl_disp_cc_mdss_dptx0_link_clk_src,
.clkr.hw.init = &(const struct clk_init_data) {
.name = "disp_cc_mdss_dptx2_link_clk_src",
.parent_data = disp_cc_parent_data_3,
.num_parents = ARRAY_SIZE(disp_cc_parent_data_3),
.flags = CLK_SET_RATE_PARENT,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_byte2_ops,
},
};
@@ -536,13 +525,12 @@ static struct clk_rcg2 disp_cc_mdss_dptx3_link_clk_src = {
.mnd_width = 0,
.hid_width = 5,
.parent_map = disp_cc_parent_map_3,
- .freq_tbl = ftbl_disp_cc_mdss_dptx0_link_clk_src,
.clkr.hw.init = &(const struct clk_init_data) {
.name = "disp_cc_mdss_dptx3_link_clk_src",
.parent_data = disp_cc_parent_data_3,
.num_parents = ARRAY_SIZE(disp_cc_parent_data_3),
.flags = CLK_SET_RATE_PARENT,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_byte2_ops,
},
};
--
2.39.2
On Wed, 24 Apr 2024 04:39:28 +0300, Dmitry Baryshkov wrote:
> On several Qualcomm platforms DisplayPort link clocks used incorrect
> frequency tables. Drop frequency tables and use clk_byte2_ops instead of
> clk_rcg2_ops.
>
> Note, this was tested on SM8450 only and then extended to other
> platforms.
>
> [...]
Applied, thanks!
[1/4] clk: qcom: dispcc-sm8450: fix DisplayPort clocks
commit: e801038a02ce1e8c652a0b668dd233a4ee48aeb7
[2/4] clk: qcom: dispcc-sm6350: fix DisplayPort clocks
commit: 1113501cfb46d5c0eb960f0a8a9f6c0f91dc6fb6
[3/4] clk: qcom: dispcc-sm8550: fix DisplayPort clocks
commit: e90b5139da8465a15c3820b4b67ca9468dce93b4
[4/4] clk: qcom: dispcc-sm8650: fix DisplayPort clocks
commit: 615a292ee4d51303246278f3fa33cc38700fe00e
Best regards,
--
Bjorn Andersson <[email protected]>