Add optional resets property for UART nodes.
Add support for uartps controller reset.
---
Changes for V2:
Added ack signature for binding patch.
Remove check for reset_control_deassert, as reset_control_deassert
function internally has NULL check.
Manikanta Guntupalli (3):
dt-bindings: serial: cdsn,uart: Add optional reset property
arm64: zynqmp: Add resets property for UART nodes
tty: serial: uartps: Add support for uartps controller reset
.../devicetree/bindings/serial/cdns,uart.yaml | 3 +++
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 2 ++
drivers/tty/serial/xilinx_uartps.c | 15 +++++++++++++++
3 files changed, 20 insertions(+)
--
2.25.1
Add optional reset device-tree property to the uartps controller.
Signed-off-by: Manikanta Guntupalli <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
---
Changes for V2:
Added ack signature.
---
Documentation/devicetree/bindings/serial/cdns,uart.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index 2129247d7c81..d7f047b0bf24 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -46,6 +46,9 @@ properties:
power-domains:
maxItems: 1
+ resets:
+ maxItems: 1
+
required:
- compatible
- reg
--
2.25.1
Add resets property for UART0 and UART1 nodes
Signed-off-by: Manikanta Guntupalli <[email protected]>
---
Changes for V2:
None.
---
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 25d20d803230..935504424ec6 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -906,6 +906,7 @@ uart0: serial@ff000000 {
reg = <0x0 0xff000000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
power-domains = <&zynqmp_firmware PD_UART_0>;
+ resets = <&zynqmp_reset ZYNQMP_RESET_UART0>;
};
uart1: serial@ff010000 {
@@ -917,6 +918,7 @@ uart1: serial@ff010000 {
reg = <0x0 0xff010000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
power-domains = <&zynqmp_firmware PD_UART_1>;
+ resets = <&zynqmp_reset ZYNQMP_RESET_UART1>;
};
usb0: usb@ff9d0000 {
--
2.25.1
Add support for an optional reset for the uartps controller using
the reset driver. If the uartps node contains the "resets" property,
then cdns_uart_startup performs uartps controller non-pulse out of reset
and reset in exit path.
Signed-off-by: Manikanta Guntupalli <[email protected]>
---
Changes for V2:
Remove check for reset_control_deassert, as reset_control_deassert
function internally has NULL check
---
drivers/tty/serial/xilinx_uartps.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index de3487206bcb..2acfcea403ce 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -25,6 +25,7 @@
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/delay.h>
+#include <linux/reset.h>
#define CDNS_UART_TTY_NAME "ttyPS"
#define CDNS_UART_NAME "xuartps"
@@ -198,6 +199,7 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
* @gpiod_rts: Pointer to the gpio descriptor
* @rs485_tx_started: RS485 tx state
* @tx_timer: Timer for tx
+ * @rstc: Pointer to the reset control
*/
struct cdns_uart {
struct uart_port *port;
@@ -211,6 +213,7 @@ struct cdns_uart {
struct gpio_desc *gpiod_rts;
bool rs485_tx_started;
struct hrtimer tx_timer;
+ struct reset_control *rstc;
};
struct cdns_platform_data {
u32 quirks;
@@ -948,6 +951,10 @@ static int cdns_uart_startup(struct uart_port *port)
is_brk_support = cdns_uart->quirks & CDNS_UART_RXBS_SUPPORT;
+ ret = reset_control_deassert(cdns_uart->rstc);
+ if (ret)
+ return ret;
+
uart_port_lock_irqsave(port, &flags);
/* Disable the TX and RX */
@@ -1721,6 +1728,13 @@ static int cdns_uart_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "clock name 'ref_clk' is deprecated.\n");
}
+ cdns_uart_data->rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(cdns_uart_data->rstc)) {
+ rc = PTR_ERR(cdns_uart_data->rstc);
+ dev_err_probe(&pdev->dev, rc, "Cannot get UART reset\n");
+ goto err_out_unregister_driver;
+ }
+
rc = clk_prepare_enable(cdns_uart_data->pclk);
if (rc) {
dev_err(&pdev->dev, "Unable to enable pclk clock.\n");
@@ -1881,6 +1895,7 @@ static void cdns_uart_remove(struct platform_device *pdev)
if (console_port == port)
console_port = NULL;
#endif
+ reset_control_assert(cdns_uart_data->rstc);
if (!--instances)
uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
--
2.25.1
On Wed, Apr 24, 2024 at 04:59:31PM +0530, Manikanta Guntupalli wrote:
> Add optional reset device-tree property to the uartps controller.
Typo in the subject.
>
> Signed-off-by: Manikanta Guntupalli <[email protected]>
> Acked-by: Krzysztof Kozlowski <[email protected]>
> ---
> Changes for V2:
> Added ack signature.
> ---
> Documentation/devicetree/bindings/serial/cdns,uart.yaml | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> index 2129247d7c81..d7f047b0bf24 100644
> --- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> @@ -46,6 +46,9 @@ properties:
> power-domains:
> maxItems: 1
>
> + resets:
> + maxItems: 1
> +
> required:
> - compatible
> - reg
> --
> 2.25.1
>