There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_interruptible_timeout() causing patterns like:
timeout = wait_for_completion_interruptible_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <[email protected]>
---
drivers/iio/pressure/zpa2326.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/pressure/zpa2326.c b/drivers/iio/pressure/zpa2326.c
index 421e059d1f19..dcc87a9015e8 100644
--- a/drivers/iio/pressure/zpa2326.c
+++ b/drivers/iio/pressure/zpa2326.c
@@ -861,13 +861,13 @@ static int zpa2326_wait_oneshot_completion(const struct iio_dev *indio_dev,
struct zpa2326_private *private)
{
unsigned int val;
- long timeout;
+ long time_left;
zpa2326_dbg(indio_dev, "waiting for one shot completion interrupt");
- timeout = wait_for_completion_interruptible_timeout(
+ time_left = wait_for_completion_interruptible_timeout(
&private->data_ready, ZPA2326_CONVERSION_JIFFIES);
- if (timeout > 0)
+ if (time_left > 0)
/*
* Interrupt handler completed before timeout: return operation
* status.
@@ -877,10 +877,10 @@ static int zpa2326_wait_oneshot_completion(const struct iio_dev *indio_dev,
/* Clear all interrupts just to be sure. */
regmap_read(private->regmap, ZPA2326_INT_SOURCE_REG, &val);
- if (!timeout) {
+ if (!time_left) {
/* Timed out. */
zpa2326_warn(indio_dev, "no one shot interrupt occurred (%ld)",
- timeout);
+ time_left);
return -ETIME;
}
--
2.43.0