From: Thomas Gleixner <[email protected]>
The core code provides a mechanism to convert the ART base clock to the
corresponding TSC value without requiring an architecture specific
function.
All what is required is to store the ART clocksoure ID and the cycles
value in the provided system_counterval structure.
Replace the direct conversion via convert_art_ns_to_tsc() by filling in
the required data.
No functional change intended.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Lakshmi Sowjanya D <[email protected]>
---
drivers/net/ethernet/intel/igc/igc_ptp.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_ptp.c b/drivers/net/ethernet/intel/igc/igc_ptp.c
index 885faaa7b9de..39656489d73e 100644
--- a/drivers/net/ethernet/intel/igc/igc_ptp.c
+++ b/drivers/net/ethernet/intel/igc/igc_ptp.c
@@ -901,7 +901,11 @@ static bool igc_is_crosststamp_supported(struct igc_adapter *adapter)
static struct system_counterval_t igc_device_tstamp_to_system(u64 tstamp)
{
#if IS_ENABLED(CONFIG_X86_TSC) && !defined(CONFIG_UML)
- return convert_art_ns_to_tsc(tstamp);
+ return (struct system_counterval_t) {
+ .cs_id = CSID_X86_ART,
+ .cycles = tstamp,
+ .use_nsecs = true,
+ };
#else
return (struct system_counterval_t) { };
#endif
--
2.35.3