The PCIe Gen4x2 PHY found in the SM8550 SoCs have a second clock named
"PHY_AUX_CLK" which is an input of the Global Clock Controller (GCC) which
is muxed & gated then returned to the PHY as an input.
Remove the dummy pcie-1-phy-aux-clk clock and now the pcie1_phy exposes
2 clocks, properly add the pcie1_phy provided clocks to the Global Clock
Controller (GCC) node clocks inputs.
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
---
arch/arm64/boot/dts/qcom/sm8550-hdk.dts | 4 ----
arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 4 ----
arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 19 -------------------
arch/arm64/boot/dts/qcom/sm8550.dtsi | 13 ++++---------
4 files changed, 4 insertions(+), 36 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
index 12d60a0ee095..ccff744dcd14 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
@@ -979,10 +979,6 @@ &pcie1_phy {
status = "okay";
};
-&pcie_1_phy_aux_clk {
- clock-frequency = <1000>;
-};
-
&pm8550_gpios {
sdc2_card_det_n: sdc2-card-det-state {
pins = "gpio12";
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 3d4ad5aac70f..1fa7c4492057 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -739,10 +739,6 @@ &mdss_dp0_out {
remote-endpoint = <&usb_dp_qmpphy_dp_in>;
};
-&pcie_1_phy_aux_clk {
- clock-frequency = <1000>;
-};
-
&pcie0 {
wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 92f015017418..39ba3e9969b7 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -720,17 +720,6 @@ &ipa {
status = "okay";
};
-&gcc {
- clocks = <&bi_tcxo_div2>, <&sleep_clk>,
- <&pcie0_phy>,
- <&pcie1_phy>,
- <0>,
- <&ufs_mem_phy 0>,
- <&ufs_mem_phy 1>,
- <&ufs_mem_phy 2>,
- <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
-};
-
&gpi_dma1 {
status = "okay";
};
@@ -810,10 +799,6 @@ &mdss_dp0_out {
remote-endpoint = <&usb_dp_qmpphy_dp_in>;
};
-&pcie_1_phy_aux_clk {
- status = "disabled";
-};
-
&pcie0 {
wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -907,10 +892,6 @@ &pon_resin {
status = "okay";
};
-&pcie_1_phy_aux_clk {
- clock-frequency = <1000>;
-};
-
&qupv3_id_0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index bc5aeb05ffc3..143994d1e6ca 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -58,11 +58,6 @@ bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
clock-mult = <1>;
clock-div = <2>;
};
-
- pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- };
};
cpus {
@@ -776,8 +771,8 @@ gcc: clock-controller@100000 {
#power-domain-cells = <1>;
clocks = <&bi_tcxo_div2>, <&sleep_clk>,
<&pcie0_phy>,
- <&pcie1_phy>,
- <&pcie_1_phy_aux_clk>,
+ <&pcie1_phy QMP_PCIE_PIPE_CLK>,
+ <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>,
<&ufs_mem_phy 0>,
<&ufs_mem_phy 1>,
<&ufs_mem_phy 2>,
@@ -1928,8 +1923,8 @@ pcie1_phy: phy@1c0e000 {
power-domains = <&gcc PCIE_1_PHY_GDSC>;
- #clock-cells = <0>;
- clock-output-names = "pcie1_pipe_clk";
+ #clock-cells = <1>;
+ clock-output-names = "pcie1_pipe_clk", "pcie1_phy_aux_clk";
#phy-cells = <0>;
--
2.34.1