Originally, __wb_calc_thresh always calculate wb's share of dirty
throttling threshold. By getting thresh of wb_domain from caller,
__wb_calc_thresh could be used for both dirty throttling and dirty
background threshold.
This is a preparation to correct threshold calculation of wb in cgroup.
Signed-off-by: Kemeng Shi <[email protected]>
---
mm/page-writeback.c | 33 ++++++++++++++++++---------------
1 file changed, 18 insertions(+), 15 deletions(-)
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index db5769cb12fd..2a3b68aae336 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -838,13 +838,15 @@ static void mdtc_calc_avail(struct dirty_throttle_control *mdtc,
}
/**
- * __wb_calc_thresh - @wb's share of dirty throttling threshold
+ * __wb_calc_thresh - @wb's share of dirty threshold
* @dtc: dirty_throttle_context of interest
+ * @thresh: dirty throttling or dirty background threshold of wb_domain in @dtc
*
- * Note that balance_dirty_pages() will only seriously take it as a hard limit
- * when sleeping max_pause per page is not enough to keep the dirty pages under
- * control. For example, when the device is completely stalled due to some error
- * conditions, or when there are 1000 dd tasks writing to a slow 10MB/s USB key.
+ * Note that balance_dirty_pages() will only seriously take dirty throttling
+ * threshold as a hard limit when sleeping max_pause per page is not enough
+ * to keep the dirty pages under control. For example, when the device is
+ * completely stalled due to some error conditions, or when there are 1000
+ * dd tasks writing to a slow 10MB/s USB key.
* In the other normal situations, it acts more gently by throttling the tasks
* more (rather than completely block them) when the wb dirty pages go high.
*
@@ -855,19 +857,20 @@ static void mdtc_calc_avail(struct dirty_throttle_control *mdtc,
* The wb's share of dirty limit will be adapting to its throughput and
* bounded by the bdi->min_ratio and/or bdi->max_ratio parameters, if set.
*
- * Return: @wb's dirty limit in pages. The term "dirty" in the context of
- * dirty balancing includes all PG_dirty and PG_writeback pages.
+ * Return: @wb's dirty limit in pages. For dirty throttling limit, the term
+ * "dirty" in the context of dirty balancing includes all PG_dirty and
+ * PG_writeback pages.
*/
-static unsigned long __wb_calc_thresh(struct dirty_throttle_control *dtc)
+static unsigned long __wb_calc_thresh(struct dirty_throttle_control *dtc,
+ unsigned long thresh)
{
struct wb_domain *dom = dtc_dom(dtc);
- unsigned long thresh = dtc->thresh;
u64 wb_thresh;
unsigned long numerator, denominator;
unsigned long wb_min_ratio, wb_max_ratio;
/*
- * Calculate this BDI's share of the thresh ratio.
+ * Calculate this wb's share of the thresh ratio.
*/
fprop_fraction_percpu(&dom->completions, dtc->wb_completions,
&numerator, &denominator);
@@ -887,9 +890,9 @@ static unsigned long __wb_calc_thresh(struct dirty_throttle_control *dtc)
unsigned long wb_calc_thresh(struct bdi_writeback *wb, unsigned long thresh)
{
- struct dirty_throttle_control gdtc = { GDTC_INIT(wb),
- .thresh = thresh };
- return __wb_calc_thresh(&gdtc);
+ struct dirty_throttle_control gdtc = { GDTC_INIT(wb) };
+
+ return __wb_calc_thresh(&gdtc, thresh);
}
unsigned long cgwb_calc_thresh(struct bdi_writeback *wb)
@@ -908,7 +911,7 @@ unsigned long cgwb_calc_thresh(struct bdi_writeback *wb)
mdtc_calc_avail(&mdtc, filepages, headroom);
domain_dirty_limits(&mdtc);
- return __wb_calc_thresh(&mdtc);
+ return __wb_calc_thresh(&mdtc, mdtc.thresh);
}
/*
@@ -1655,7 +1658,7 @@ static inline void wb_dirty_limits(struct dirty_throttle_control *dtc)
* wb_position_ratio() will let the dirtier task progress
* at some rate <= (write_bw / 2) for bringing down wb_dirty.
*/
- dtc->wb_thresh = __wb_calc_thresh(dtc);
+ dtc->wb_thresh = __wb_calc_thresh(dtc, dtc->thresh);
dtc->wb_bg_thresh = dtc->thresh ?
div64_u64(dtc->wb_thresh * dtc->bg_thresh, dtc->thresh) : 0;
--
2.30.0
On Thu 25-04-24 21:17:21, Kemeng Shi wrote:
> Originally, __wb_calc_thresh always calculate wb's share of dirty
> throttling threshold. By getting thresh of wb_domain from caller,
> __wb_calc_thresh could be used for both dirty throttling and dirty
> background threshold.
>
> This is a preparation to correct threshold calculation of wb in cgroup.
>
> Signed-off-by: Kemeng Shi <[email protected]>
Looks good. Feel free to add:
Reviewed-by: Jan Kara <[email protected]>
Honza
> ---
> mm/page-writeback.c | 33 ++++++++++++++++++---------------
> 1 file changed, 18 insertions(+), 15 deletions(-)
>
> diff --git a/mm/page-writeback.c b/mm/page-writeback.c
> index db5769cb12fd..2a3b68aae336 100644
> --- a/mm/page-writeback.c
> +++ b/mm/page-writeback.c
> @@ -838,13 +838,15 @@ static void mdtc_calc_avail(struct dirty_throttle_control *mdtc,
> }
>
> /**
> - * __wb_calc_thresh - @wb's share of dirty throttling threshold
> + * __wb_calc_thresh - @wb's share of dirty threshold
> * @dtc: dirty_throttle_context of interest
> + * @thresh: dirty throttling or dirty background threshold of wb_domain in @dtc
> *
> - * Note that balance_dirty_pages() will only seriously take it as a hard limit
> - * when sleeping max_pause per page is not enough to keep the dirty pages under
> - * control. For example, when the device is completely stalled due to some error
> - * conditions, or when there are 1000 dd tasks writing to a slow 10MB/s USB key.
> + * Note that balance_dirty_pages() will only seriously take dirty throttling
> + * threshold as a hard limit when sleeping max_pause per page is not enough
> + * to keep the dirty pages under control. For example, when the device is
> + * completely stalled due to some error conditions, or when there are 1000
> + * dd tasks writing to a slow 10MB/s USB key.
> * In the other normal situations, it acts more gently by throttling the tasks
> * more (rather than completely block them) when the wb dirty pages go high.
> *
> @@ -855,19 +857,20 @@ static void mdtc_calc_avail(struct dirty_throttle_control *mdtc,
> * The wb's share of dirty limit will be adapting to its throughput and
> * bounded by the bdi->min_ratio and/or bdi->max_ratio parameters, if set.
> *
> - * Return: @wb's dirty limit in pages. The term "dirty" in the context of
> - * dirty balancing includes all PG_dirty and PG_writeback pages.
> + * Return: @wb's dirty limit in pages. For dirty throttling limit, the term
> + * "dirty" in the context of dirty balancing includes all PG_dirty and
> + * PG_writeback pages.
> */
> -static unsigned long __wb_calc_thresh(struct dirty_throttle_control *dtc)
> +static unsigned long __wb_calc_thresh(struct dirty_throttle_control *dtc,
> + unsigned long thresh)
> {
> struct wb_domain *dom = dtc_dom(dtc);
> - unsigned long thresh = dtc->thresh;
> u64 wb_thresh;
> unsigned long numerator, denominator;
> unsigned long wb_min_ratio, wb_max_ratio;
>
> /*
> - * Calculate this BDI's share of the thresh ratio.
> + * Calculate this wb's share of the thresh ratio.
> */
> fprop_fraction_percpu(&dom->completions, dtc->wb_completions,
> &numerator, &denominator);
> @@ -887,9 +890,9 @@ static unsigned long __wb_calc_thresh(struct dirty_throttle_control *dtc)
>
> unsigned long wb_calc_thresh(struct bdi_writeback *wb, unsigned long thresh)
> {
> - struct dirty_throttle_control gdtc = { GDTC_INIT(wb),
> - .thresh = thresh };
> - return __wb_calc_thresh(&gdtc);
> + struct dirty_throttle_control gdtc = { GDTC_INIT(wb) };
> +
> + return __wb_calc_thresh(&gdtc, thresh);
> }
>
> unsigned long cgwb_calc_thresh(struct bdi_writeback *wb)
> @@ -908,7 +911,7 @@ unsigned long cgwb_calc_thresh(struct bdi_writeback *wb)
> mdtc_calc_avail(&mdtc, filepages, headroom);
> domain_dirty_limits(&mdtc);
>
> - return __wb_calc_thresh(&mdtc);
> + return __wb_calc_thresh(&mdtc, mdtc.thresh);
> }
>
> /*
> @@ -1655,7 +1658,7 @@ static inline void wb_dirty_limits(struct dirty_throttle_control *dtc)
> * wb_position_ratio() will let the dirtier task progress
> * at some rate <= (write_bw / 2) for bringing down wb_dirty.
> */
> - dtc->wb_thresh = __wb_calc_thresh(dtc);
> + dtc->wb_thresh = __wb_calc_thresh(dtc, dtc->thresh);
> dtc->wb_bg_thresh = dtc->thresh ?
> div64_u64(dtc->wb_thresh * dtc->bg_thresh, dtc->thresh) : 0;
>
> --
> 2.30.0
>
--
Jan Kara <[email protected]>
SUSE Labs, CR