The first patch of the series converts the driver to register with the
hwmon subsystem using devm_hwmon_device_register_with_info() instead of
devm_hwmon_device_register_with_groups().
The second patch adds support for 11-bit sensor and limit register
accuracy.
The third patch adds support for update_interval attribute.
The changes were module tested with the script at
https://github.com/groeck/module-tests/blob/master/scripts/emc1403.sh
v2: Reworked first patch of the series to prepare for subsequent patches.
Added patch 2 and 3.
----------------------------------------------------------------
Guenter Roeck (3):
hwmon: (emc1403) Convert to with_info API
hwmon: (emc1403) Support 11 bit accuracy
hwmon: (emc1403) Add support for conversion interval configuration
drivers/hwmon/emc1403.c | 749 +++++++++++++++++++++++++++++-------------------
1 file changed, 453 insertions(+), 296 deletions(-)
Various temperature and limit registers support 11 bit accuracy.
Add support for it.
Cc: Lars Petter Mostad <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
---
v2: Added patch
drivers/hwmon/emc1403.c | 55 ++++++++++++++++++++++++++++++++++++++---
1 file changed, 52 insertions(+), 3 deletions(-)
diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c
index e656f0432a57..e53bb4d8bc1b 100644
--- a/drivers/hwmon/emc1403.c
+++ b/drivers/hwmon/emc1403.c
@@ -178,17 +178,52 @@ static u8 emc1403_temp_regs[][4] = {
},
};
+static s8 emc1403_temp_regs_low[][4] = {
+ [0] = {
+ [temp_min] = -1,
+ [temp_max] = -1,
+ [temp_crit] = -1,
+ [temp_input] = 0x29,
+ },
+ [1] = {
+ [temp_min] = 0x14,
+ [temp_max] = 0x13,
+ [temp_crit] = -1,
+ [temp_input] = 0x10,
+ },
+ [2] = {
+ [temp_min] = 0x18,
+ [temp_max] = 0x17,
+ [temp_crit] = -1,
+ [temp_input] = 0x24,
+ },
+ [3] = {
+ [temp_min] = 0x2f,
+ [temp_max] = 0x2e,
+ [temp_crit] = -1,
+ [temp_input] = 0x2b,
+ },
+};
+
static int __emc1403_get_temp(struct thermal_data *data, int channel,
enum emc1403_reg_map map, long *val)
{
unsigned int regval;
int ret;
+ s8 reg;
ret = regmap_read(data->regmap, emc1403_temp_regs[channel][map], ®val);
if (ret < 0)
return ret;
*val = regval * 1000;
+ reg = emc1403_temp_regs_low[channel][map];
+ if (reg >= 0) {
+ ret = regmap_read(data->regmap, reg, ®val);
+ if (ret < 0)
+ return ret;
+ *val += (regval >> 5) * 125;
+ }
return 0;
}
@@ -336,12 +371,26 @@ static int emc1403_set_temp(struct thermal_data *data, int channel,
{
unsigned int regval;
int ret;
+ u8 regh;
+ s8 regl;
- val = clamp_val(val, 0, 255000);
+ regh = emc1403_temp_regs[channel][map];
+ regl = emc1403_temp_regs_low[channel][map];
mutex_lock(&data->mutex);
- regval = DIV_ROUND_CLOSEST(val, 1000);
- ret = regmap_write(data->regmap, emc1403_temp_regs[channel][map], regval);
+ if (regl >= 0) {
+ val = clamp_val(val, 0, 255875);
+ regval = DIV_ROUND_CLOSEST(val, 125);
+ ret = regmap_write(data->regmap, regh, regval >> 3);
+ if (ret < 0)
+ goto unlock;
+ ret = regmap_write(data->regmap, regl, (regval & 0x07) << 5);
+ } else {
+ val = clamp_val(val, 0, 255000);
+ regval = DIV_ROUND_CLOSEST(val, 1000);
+ ret = regmap_write(data->regmap, regh, regval);
+ }
+unlock:
mutex_unlock(&data->mutex);
return ret;
}
--
2.39.2
Convert driver to register with the hwmon subsystem using
devm_hwmon_device_register_with_info() instead of
devm_hwmon_device_register_with_groups() to simplify the code
and to reduce its size. As side effect, this also fixes a couple
of overflow problems when writing limit and hysteresis registers.
Cc: Lars Petter Mostad <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
---
v2: Reworked to prepare for subsequent patches.
No functional changes.
drivers/hwmon/emc1403.c | 635 +++++++++++++++++++++-------------------
1 file changed, 338 insertions(+), 297 deletions(-)
diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c
index d370efd6f986..e656f0432a57 100644
--- a/drivers/hwmon/emc1403.c
+++ b/drivers/hwmon/emc1403.c
@@ -27,294 +27,47 @@
enum emc1403_chip { emc1402, emc1403, emc1404 };
struct thermal_data {
+ enum emc1403_chip chip;
struct regmap *regmap;
struct mutex mutex;
- const struct attribute_group *groups[4];
};
-static ssize_t temp_show(struct device *dev, struct device_attribute *attr,
- char *buf)
+static ssize_t power_state_show(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
struct thermal_data *data = dev_get_drvdata(dev);
unsigned int val;
int retval;
- retval = regmap_read(data->regmap, sda->index, &val);
+ retval = regmap_read(data->regmap, 0x03, &val);
if (retval < 0)
return retval;
- return sprintf(buf, "%d000\n", val);
+ return sprintf(buf, "%d\n", !!(val & BIT(6)));
}
-static ssize_t bit_show(struct device *dev, struct device_attribute *attr,
- char *buf)
+static ssize_t power_state_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
- struct sensor_device_attribute_2 *sda = to_sensor_dev_attr_2(attr);
- struct thermal_data *data = dev_get_drvdata(dev);
- unsigned int val;
- int retval;
-
- retval = regmap_read(data->regmap, sda->nr, &val);
- if (retval < 0)
- return retval;
- return sprintf(buf, "%d\n", !!(val & sda->index));
-}
-
-static ssize_t temp_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
struct thermal_data *data = dev_get_drvdata(dev);
unsigned long val;
int retval;
if (kstrtoul(buf, 10, &val))
return -EINVAL;
- retval = regmap_write(data->regmap, sda->index,
- DIV_ROUND_CLOSEST(val, 1000));
+
+ retval = regmap_update_bits(data->regmap, 0x03, BIT(6),
+ val ? BIT(6) : 0);
if (retval < 0)
return retval;
return count;
}
-static ssize_t bit_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct sensor_device_attribute_2 *sda = to_sensor_dev_attr_2(attr);
- struct thermal_data *data = dev_get_drvdata(dev);
- unsigned long val;
- int retval;
-
- if (kstrtoul(buf, 10, &val))
- return -EINVAL;
-
- retval = regmap_update_bits(data->regmap, sda->nr, sda->index,
- val ? sda->index : 0);
- if (retval < 0)
- return retval;
- return count;
-}
-
-static ssize_t show_hyst_common(struct device *dev,
- struct device_attribute *attr, char *buf,
- bool is_min)
-{
- struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
- struct thermal_data *data = dev_get_drvdata(dev);
- struct regmap *regmap = data->regmap;
- unsigned int limit;
- unsigned int hyst;
- int retval;
-
- retval = regmap_read(regmap, sda->index, &limit);
- if (retval < 0)
- return retval;
-
- retval = regmap_read(regmap, 0x21, &hyst);
- if (retval < 0)
- return retval;
-
- return sprintf(buf, "%d000\n", is_min ? limit + hyst : limit - hyst);
-}
-
-static ssize_t hyst_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- return show_hyst_common(dev, attr, buf, false);
-}
-
-static ssize_t min_hyst_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return show_hyst_common(dev, attr, buf, true);
-}
-
-static ssize_t hyst_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
- struct thermal_data *data = dev_get_drvdata(dev);
- struct regmap *regmap = data->regmap;
- unsigned int limit;
- int retval;
- int hyst;
- unsigned long val;
-
- if (kstrtoul(buf, 10, &val))
- return -EINVAL;
-
- mutex_lock(&data->mutex);
- retval = regmap_read(regmap, sda->index, &limit);
- if (retval < 0)
- goto fail;
-
- hyst = limit * 1000 - val;
- hyst = clamp_val(DIV_ROUND_CLOSEST(hyst, 1000), 0, 255);
- retval = regmap_write(regmap, 0x21, hyst);
- if (retval == 0)
- retval = count;
-fail:
- mutex_unlock(&data->mutex);
- return retval;
-}
-
-/*
- * Sensors. We pass the actual i2c register to the methods.
- */
-
-static SENSOR_DEVICE_ATTR_RW(temp1_min, temp, 0x06);
-static SENSOR_DEVICE_ATTR_RW(temp1_max, temp, 0x05);
-static SENSOR_DEVICE_ATTR_RW(temp1_crit, temp, 0x20);
-static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0x00);
-static SENSOR_DEVICE_ATTR_2_RO(temp1_min_alarm, bit, 0x36, 0x01);
-static SENSOR_DEVICE_ATTR_2_RO(temp1_max_alarm, bit, 0x35, 0x01);
-static SENSOR_DEVICE_ATTR_2_RO(temp1_crit_alarm, bit, 0x37, 0x01);
-static SENSOR_DEVICE_ATTR_RO(temp1_min_hyst, min_hyst, 0x06);
-static SENSOR_DEVICE_ATTR_RO(temp1_max_hyst, hyst, 0x05);
-static SENSOR_DEVICE_ATTR_RW(temp1_crit_hyst, hyst, 0x20);
-
-static SENSOR_DEVICE_ATTR_RW(temp2_min, temp, 0x08);
-static SENSOR_DEVICE_ATTR_RW(temp2_max, temp, 0x07);
-static SENSOR_DEVICE_ATTR_RW(temp2_crit, temp, 0x19);
-static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 0x01);
-static SENSOR_DEVICE_ATTR_2_RO(temp2_fault, bit, 0x1b, 0x02);
-static SENSOR_DEVICE_ATTR_2_RO(temp2_min_alarm, bit, 0x36, 0x02);
-static SENSOR_DEVICE_ATTR_2_RO(temp2_max_alarm, bit, 0x35, 0x02);
-static SENSOR_DEVICE_ATTR_2_RO(temp2_crit_alarm, bit, 0x37, 0x02);
-static SENSOR_DEVICE_ATTR_RO(temp2_min_hyst, min_hyst, 0x08);
-static SENSOR_DEVICE_ATTR_RO(temp2_max_hyst, hyst, 0x07);
-static SENSOR_DEVICE_ATTR_RO(temp2_crit_hyst, hyst, 0x19);
-
-static SENSOR_DEVICE_ATTR_RW(temp3_min, temp, 0x16);
-static SENSOR_DEVICE_ATTR_RW(temp3_max, temp, 0x15);
-static SENSOR_DEVICE_ATTR_RW(temp3_crit, temp, 0x1A);
-static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 0x23);
-static SENSOR_DEVICE_ATTR_2_RO(temp3_fault, bit, 0x1b, 0x04);
-static SENSOR_DEVICE_ATTR_2_RO(temp3_min_alarm, bit, 0x36, 0x04);
-static SENSOR_DEVICE_ATTR_2_RO(temp3_max_alarm, bit, 0x35, 0x04);
-static SENSOR_DEVICE_ATTR_2_RO(temp3_crit_alarm, bit, 0x37, 0x04);
-static SENSOR_DEVICE_ATTR_RO(temp3_min_hyst, min_hyst, 0x16);
-static SENSOR_DEVICE_ATTR_RO(temp3_max_hyst, hyst, 0x15);
-static SENSOR_DEVICE_ATTR_RO(temp3_crit_hyst, hyst, 0x1A);
-
-static SENSOR_DEVICE_ATTR_RW(temp4_min, temp, 0x2D);
-static SENSOR_DEVICE_ATTR_RW(temp4_max, temp, 0x2C);
-static SENSOR_DEVICE_ATTR_RW(temp4_crit, temp, 0x30);
-static SENSOR_DEVICE_ATTR_RO(temp4_input, temp, 0x2A);
-static SENSOR_DEVICE_ATTR_2_RO(temp4_fault, bit, 0x1b, 0x08);
-static SENSOR_DEVICE_ATTR_2_RO(temp4_min_alarm, bit, 0x36, 0x08);
-static SENSOR_DEVICE_ATTR_2_RO(temp4_max_alarm, bit, 0x35, 0x08);
-static SENSOR_DEVICE_ATTR_2_RO(temp4_crit_alarm, bit, 0x37, 0x08);
-static SENSOR_DEVICE_ATTR_RO(temp4_min_hyst, min_hyst, 0x2D);
-static SENSOR_DEVICE_ATTR_RO(temp4_max_hyst, hyst, 0x2C);
-static SENSOR_DEVICE_ATTR_RO(temp4_crit_hyst, hyst, 0x30);
-
-static SENSOR_DEVICE_ATTR_2_RW(power_state, bit, 0x03, 0x40);
-
-static struct attribute *emc1402_attrs[] = {
- &sensor_dev_attr_temp1_min.dev_attr.attr,
- &sensor_dev_attr_temp1_max.dev_attr.attr,
- &sensor_dev_attr_temp1_crit.dev_attr.attr,
- &sensor_dev_attr_temp1_input.dev_attr.attr,
- &sensor_dev_attr_temp1_min_hyst.dev_attr.attr,
- &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
- &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
-
- &sensor_dev_attr_temp2_min.dev_attr.attr,
- &sensor_dev_attr_temp2_max.dev_attr.attr,
- &sensor_dev_attr_temp2_crit.dev_attr.attr,
- &sensor_dev_attr_temp2_input.dev_attr.attr,
- &sensor_dev_attr_temp2_min_hyst.dev_attr.attr,
- &sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
- &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
-
- &sensor_dev_attr_power_state.dev_attr.attr,
- NULL
-};
-
-static const struct attribute_group emc1402_group = {
- .attrs = emc1402_attrs,
-};
+static DEVICE_ATTR_RW(power_state);
static struct attribute *emc1403_attrs[] = {
- &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
- &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
- &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
-
- &sensor_dev_attr_temp2_fault.dev_attr.attr,
- &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
- &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
- &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
-
- &sensor_dev_attr_temp3_min.dev_attr.attr,
- &sensor_dev_attr_temp3_max.dev_attr.attr,
- &sensor_dev_attr_temp3_crit.dev_attr.attr,
- &sensor_dev_attr_temp3_input.dev_attr.attr,
- &sensor_dev_attr_temp3_fault.dev_attr.attr,
- &sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
- &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
- &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
- &sensor_dev_attr_temp3_min_hyst.dev_attr.attr,
- &sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
- &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
+ &dev_attr_power_state.attr,
NULL
};
-
-static const struct attribute_group emc1403_group = {
- .attrs = emc1403_attrs,
-};
-
-static struct attribute *emc1404_attrs[] = {
- &sensor_dev_attr_temp4_min.dev_attr.attr,
- &sensor_dev_attr_temp4_max.dev_attr.attr,
- &sensor_dev_attr_temp4_crit.dev_attr.attr,
- &sensor_dev_attr_temp4_input.dev_attr.attr,
- &sensor_dev_attr_temp4_fault.dev_attr.attr,
- &sensor_dev_attr_temp4_min_alarm.dev_attr.attr,
- &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
- &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
- &sensor_dev_attr_temp4_min_hyst.dev_attr.attr,
- &sensor_dev_attr_temp4_max_hyst.dev_attr.attr,
- &sensor_dev_attr_temp4_crit_hyst.dev_attr.attr,
- NULL
-};
-
-static const struct attribute_group emc1404_group = {
- .attrs = emc1404_attrs,
-};
-
-/*
- * EMC14x2 uses a different register and different bits to report alarm and
- * fault status. For simplicity, provide a separate attribute group for this
- * chip series.
- * Since we can not re-use the same attribute names, create a separate attribute
- * array.
- */
-static struct sensor_device_attribute_2 emc1402_alarms[] = {
- SENSOR_ATTR_2_RO(temp1_min_alarm, bit, 0x02, 0x20),
- SENSOR_ATTR_2_RO(temp1_max_alarm, bit, 0x02, 0x40),
- SENSOR_ATTR_2_RO(temp1_crit_alarm, bit, 0x02, 0x01),
-
- SENSOR_ATTR_2_RO(temp2_fault, bit, 0x02, 0x04),
- SENSOR_ATTR_2_RO(temp2_min_alarm, bit, 0x02, 0x08),
- SENSOR_ATTR_2_RO(temp2_max_alarm, bit, 0x02, 0x10),
- SENSOR_ATTR_2_RO(temp2_crit_alarm, bit, 0x02, 0x02),
-};
-
-static struct attribute *emc1402_alarm_attrs[] = {
- &emc1402_alarms[0].dev_attr.attr,
- &emc1402_alarms[1].dev_attr.attr,
- &emc1402_alarms[2].dev_attr.attr,
- &emc1402_alarms[3].dev_attr.attr,
- &emc1402_alarms[4].dev_attr.attr,
- &emc1402_alarms[5].dev_attr.attr,
- &emc1402_alarms[6].dev_attr.attr,
- NULL,
-};
-
-static const struct attribute_group emc1402_alarm_group = {
- .attrs = emc1402_alarm_attrs,
-};
+ATTRIBUTE_GROUPS(emc1403);
static int emc1403_detect(struct i2c_client *client,
struct i2c_board_info *info)
@@ -389,51 +142,310 @@ static const struct regmap_config emc1403_regmap_config = {
.volatile_reg = emc1403_regmap_is_volatile,
};
-static const struct i2c_device_id emc1403_idtable[];
+enum emc1403_reg_map {temp_min, temp_max, temp_crit, temp_input};
-static int emc1403_probe(struct i2c_client *client)
+static u8 ema1403_temp_map[] = {
+ [hwmon_temp_min] = temp_min,
+ [hwmon_temp_max] = temp_max,
+ [hwmon_temp_crit] = temp_crit,
+ [hwmon_temp_input] = temp_input,
+};
+
+static u8 emc1403_temp_regs[][4] = {
+ [0] = {
+ [temp_min] = 0x06,
+ [temp_max] = 0x05,
+ [temp_crit] = 0x20,
+ [temp_input] = 0x00,
+ },
+ [1] = {
+ [temp_min] = 0x08,
+ [temp_max] = 0x07,
+ [temp_crit] = 0x19,
+ [temp_input] = 0x01,
+ },
+ [2] = {
+ [temp_min] = 0x16,
+ [temp_max] = 0x15,
+ [temp_crit] = 0x1a,
+ [temp_input] = 0x23,
+ },
+ [3] = {
+ [temp_min] = 0x2d,
+ [temp_max] = 0x2c,
+ [temp_crit] = 0x30,
+ [temp_input] = 0x2a,
+ },
+};
+
+static int __emc1403_get_temp(struct thermal_data *data, int channel,
+ enum emc1403_reg_map map, long *val)
{
- struct thermal_data *data;
- struct device *hwmon_dev;
- const struct i2c_device_id *id = i2c_match_id(emc1403_idtable, client);
+ unsigned int regval;
+ int ret;
- data = devm_kzalloc(&client->dev, sizeof(struct thermal_data),
- GFP_KERNEL);
- if (data == NULL)
- return -ENOMEM;
+ ret = regmap_read(data->regmap, emc1403_temp_regs[channel][map], ®val);
+ if (ret < 0)
+ return ret;
+ *val = regval * 1000;
- data->regmap = devm_regmap_init_i2c(client, &emc1403_regmap_config);
- if (IS_ERR(data->regmap))
- return PTR_ERR(data->regmap);
-
- mutex_init(&data->mutex);
-
- switch (id->driver_data) {
- case emc1404:
- data->groups[2] = &emc1404_group;
- fallthrough;
- case emc1403:
- data->groups[1] = &emc1403_group;
- fallthrough;
- case emc1402:
- data->groups[0] = &emc1402_group;
- }
-
- if (id->driver_data == emc1402)
- data->groups[1] = &emc1402_alarm_group;
-
- hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev,
- client->name, data,
- data->groups);
- if (IS_ERR(hwmon_dev))
- return PTR_ERR(hwmon_dev);
-
- dev_info(&client->dev, "%s Thermal chip found\n", id->name);
return 0;
}
-static const unsigned short emc1403_address_list[] = {
- 0x18, 0x1c, 0x29, 0x3c, 0x4c, 0x4d, 0x5c, I2C_CLIENT_END
+static int emc1403_get_temp(struct thermal_data *data, int channel,
+ enum emc1403_reg_map map, long *val)
+{
+ int ret;
+
+ mutex_lock(&data->mutex);
+ ret = __emc1403_get_temp(data, channel, map, val);
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static int emc1403_get_hyst(struct thermal_data *data, int channel,
+ enum emc1403_reg_map map, long *val)
+{
+ int hyst, ret;
+ long limit;
+
+ mutex_lock(&data->mutex);
+ ret = __emc1403_get_temp(data, channel, map, &limit);
+ if (ret < 0)
+ goto unlock;
+ ret = regmap_read(data->regmap, 0x21, &hyst);
+ if (ret < 0)
+ goto unlock;
+ if (map == temp_min)
+ *val = limit + hyst * 1000;
+ else
+ *val = limit - hyst * 1000;
+unlock:
+ mutex_unlock(&data->mutex);
+ return ret;
+}
+
+static int emc1403_temp_read(struct thermal_data *data, u32 attr, int channel, long *val)
+{
+ unsigned int regval;
+ int ret;
+
+ switch (attr) {
+ case hwmon_temp_min:
+ case hwmon_temp_max:
+ case hwmon_temp_crit:
+ case hwmon_temp_input:
+ ret = emc1403_get_temp(data, channel, ema1403_temp_map[attr], val);
+ break;
+ case hwmon_temp_min_hyst:
+ ret = emc1403_get_hyst(data, channel, temp_min, val);
+ break;
+ case hwmon_temp_max_hyst:
+ ret = emc1403_get_hyst(data, channel, temp_max, val);
+ break;
+ case hwmon_temp_crit_hyst:
+ ret = emc1403_get_hyst(data, channel, temp_crit, val);
+ break;
+ case hwmon_temp_min_alarm:
+ if (data->chip == emc1402) {
+ ret = regmap_read(data->regmap, 0x02, ®val);
+ if (ret < 0)
+ break;
+ *val = !!(regval & BIT(5 - 2 * channel));
+ } else {
+ ret = regmap_read(data->regmap, 0x36, ®val);
+ if (ret < 0)
+ break;
+ *val = !!(regval & BIT(channel));
+ }
+ break;
+ case hwmon_temp_max_alarm:
+ if (data->chip == emc1402) {
+ ret = regmap_read(data->regmap, 0x02, ®val);
+ if (ret < 0)
+ break;
+ *val = !!(regval & BIT(6 - 2 * channel));
+ } else {
+ ret = regmap_read(data->regmap, 0x35, ®val);
+ if (ret < 0)
+ break;
+ *val = !!(regval & BIT(channel));
+ }
+ break;
+ case hwmon_temp_crit_alarm:
+ if (data->chip == emc1402) {
+ ret = regmap_read(data->regmap, 0x02, ®val);
+ if (ret < 0)
+ break;
+ *val = !!(regval & BIT(channel));
+ } else {
+ ret = regmap_read(data->regmap, 0x37, ®val);
+ if (ret < 0)
+ break;
+ *val = !!(regval & BIT(channel));
+ }
+ break;
+ case hwmon_temp_fault:
+ ret = regmap_read(data->regmap, 0x1b, ®val);
+ if (ret < 0)
+ break;
+ *val = !!(regval & BIT(channel));
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return ret;
+}
+
+static int emc1403_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct thermal_data *data = dev_get_drvdata(dev);
+
+ switch (type) {
+ case hwmon_temp:
+ return emc1403_temp_read(data, attr, channel, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int emc1403_set_hyst(struct thermal_data *data, long val)
+{
+ int hyst, ret;
+ long limit;
+
+ val = clamp_val(val, 0, 255000);
+
+ mutex_lock(&data->mutex);
+ ret = __emc1403_get_temp(data, 0, temp_crit, &limit);
+ if (ret < 0)
+ goto unlock;
+
+ hyst = limit - val;
+ hyst = clamp_val(DIV_ROUND_CLOSEST(hyst, 1000), 0, 255);
+ ret = regmap_write(data->regmap, 0x21, hyst);
+unlock:
+ mutex_unlock(&data->mutex);
+ return ret;
+}
+
+static int emc1403_set_temp(struct thermal_data *data, int channel,
+ enum emc1403_reg_map map, long val)
+{
+ unsigned int regval;
+ int ret;
+
+ val = clamp_val(val, 0, 255000);
+
+ mutex_lock(&data->mutex);
+ regval = DIV_ROUND_CLOSEST(val, 1000);
+ ret = regmap_write(data->regmap, emc1403_temp_regs[channel][map], regval);
+ mutex_unlock(&data->mutex);
+ return ret;
+}
+
+static int emc1403_temp_write(struct thermal_data *data, u32 attr, int channel, long val)
+{
+ switch (attr) {
+ case hwmon_temp_min:
+ case hwmon_temp_max:
+ case hwmon_temp_crit:
+ return emc1403_set_temp(data, channel, ema1403_temp_map[attr], val);
+ case hwmon_temp_crit_hyst:
+ return emc1403_set_hyst(data, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int emc1403_write(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long val)
+{
+ struct thermal_data *data = dev_get_drvdata(dev);
+
+ switch (type) {
+ case hwmon_temp:
+ return emc1403_temp_write(data, attr, channel, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static umode_t emc1403_temp_is_visible(const void *_data, u32 attr, int channel)
+{
+ const struct thermal_data *data = _data;
+
+ if (data->chip == emc1402 && channel > 1)
+ return 0;
+ if (data->chip == emc1403 && channel > 2)
+ return 0;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ case hwmon_temp_min_alarm:
+ case hwmon_temp_max_alarm:
+ case hwmon_temp_crit_alarm:
+ case hwmon_temp_fault:
+ case hwmon_temp_min_hyst:
+ case hwmon_temp_max_hyst:
+ return 0444;
+ case hwmon_temp_min:
+ case hwmon_temp_max:
+ case hwmon_temp_crit:
+ return 0644;
+ case hwmon_temp_crit_hyst:
+ if (channel == 0)
+ return 0644;
+ return 0444;
+ default:
+ return 0;
+ }
+}
+
+static umode_t emc1403_is_visible(const void *data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ switch (type) {
+ case hwmon_temp:
+ return emc1403_temp_is_visible(data, attr, channel);
+ default:
+ return 0;
+ }
+}
+
+static const struct hwmon_channel_info * const emc1403_info[] = {
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
+ HWMON_T_CRIT | HWMON_T_MIN_HYST | HWMON_T_MAX_HYST |
+ HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
+ HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM,
+ HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
+ HWMON_T_CRIT | HWMON_T_MIN_HYST | HWMON_T_MAX_HYST |
+ HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
+ HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT,
+ HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
+ HWMON_T_CRIT | HWMON_T_MIN_HYST | HWMON_T_MAX_HYST |
+ HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
+ HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT,
+ HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
+ HWMON_T_CRIT | HWMON_T_MIN_HYST | HWMON_T_MAX_HYST |
+ HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
+ HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT
+ ),
+ NULL
+};
+
+static const struct hwmon_ops emc1403_hwmon_ops = {
+ .is_visible = emc1403_is_visible,
+ .read = emc1403_read,
+ .write = emc1403_write,
+};
+
+static const struct hwmon_chip_info emc1403_chip_info = {
+ .ops = &emc1403_hwmon_ops,
+ .info = emc1403_info,
};
/* Last digit of chip name indicates number of channels */
@@ -452,6 +464,35 @@ static const struct i2c_device_id emc1403_idtable[] = {
};
MODULE_DEVICE_TABLE(i2c, emc1403_idtable);
+static int emc1403_probe(struct i2c_client *client)
+{
+ struct thermal_data *data;
+ struct device *hwmon_dev;
+ const struct i2c_device_id *id = i2c_match_id(emc1403_idtable, client);
+
+ data = devm_kzalloc(&client->dev, sizeof(struct thermal_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->chip = id->driver_data;
+ data->regmap = devm_regmap_init_i2c(client, &emc1403_regmap_config);
+ if (IS_ERR(data->regmap))
+ return PTR_ERR(data->regmap);
+
+ mutex_init(&data->mutex);
+
+ hwmon_dev = devm_hwmon_device_register_with_info(&client->dev,
+ client->name, data,
+ &emc1403_chip_info,
+ emc1403_groups);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const unsigned short emc1403_address_list[] = {
+ 0x18, 0x1c, 0x29, 0x3c, 0x4c, 0x4d, 0x5c, I2C_CLIENT_END
+};
+
static struct i2c_driver sensor_emc1403 = {
.class = I2C_CLASS_HWMON,
.driver = {
--
2.39.2
The chips supported by the emc1403 driver support configurable
conversion rates. Add support for it.
Cc: Lars Petter Mostad <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
---
v2: Added patch
drivers/hwmon/emc1403.c | 67 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 67 insertions(+)
diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c
index e53bb4d8bc1b..43322bb9aaa1 100644
--- a/drivers/hwmon/emc1403.c
+++ b/drivers/hwmon/emc1403.c
@@ -19,6 +19,7 @@
#include <linux/sysfs.h>
#include <linux/mutex.h>
#include <linux/regmap.h>
+#include <linux/util_macros.h>
#define THERMAL_PID_REG 0xfd
#define THERMAL_SMSC_ID_REG 0xfe
@@ -333,6 +334,31 @@ static int emc1403_temp_read(struct thermal_data *data, u32 attr, int channel, l
return ret;
}
+static int emc1403_get_convrate(struct thermal_data *data, long *val)
+{
+ unsigned int convrate;
+ int ret;
+
+ ret = regmap_read(data->regmap, 0x04, &convrate);
+ if (ret < 0)
+ return ret;
+ if (convrate > 10)
+ convrate = 4;
+
+ *val = 16000 >> convrate;
+ return 0;
+}
+
+static int emc1403_chip_read(struct thermal_data *data, u32 attr, long *val)
+{
+ switch (attr) {
+ case hwmon_chip_update_interval:
+ return emc1403_get_convrate(data, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
static int emc1403_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *val)
{
@@ -341,6 +367,8 @@ static int emc1403_read(struct device *dev, enum hwmon_sensor_types type,
switch (type) {
case hwmon_temp:
return emc1403_temp_read(data, attr, channel, val);
+ case hwmon_chip:
+ return emc1403_chip_read(data, attr, val);
default:
return -EOPNOTSUPP;
}
@@ -409,6 +437,30 @@ static int emc1403_temp_write(struct thermal_data *data, u32 attr, int channel,
}
}
+/* Lookup table for temperature conversion times in msec */
+static const u16 ina3221_conv_time[] = {
+ 16000, 8000, 4000, 2000, 1000, 500, 250, 125, 62, 31, 16
+};
+
+static int emc1403_set_convrate(struct thermal_data *data, unsigned int interval)
+{
+ int convrate;
+
+ convrate = find_closest_descending(interval, ina3221_conv_time,
+ ARRAY_SIZE(ina3221_conv_time));
+ return regmap_write(data->regmap, 0x04, convrate);
+}
+
+static int emc1403_chip_write(struct thermal_data *data, u32 attr, long val)
+{
+ switch (attr) {
+ case hwmon_chip_update_interval:
+ return emc1403_set_convrate(data, clamp_val(val, 0, 100000));
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
static int emc1403_write(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long val)
{
@@ -417,6 +469,8 @@ static int emc1403_write(struct device *dev, enum hwmon_sensor_types type,
switch (type) {
case hwmon_temp:
return emc1403_temp_write(data, attr, channel, val);
+ case hwmon_chip:
+ return emc1403_chip_write(data, attr, val);
default:
return -EOPNOTSUPP;
}
@@ -453,18 +507,31 @@ static umode_t emc1403_temp_is_visible(const void *_data, u32 attr, int channel)
}
}
+static umode_t emc1403_chip_is_visible(const void *_data, u32 attr)
+{
+ switch (attr) {
+ case hwmon_chip_update_interval:
+ return 0644;
+ default:
+ return 0;
+ }
+}
+
static umode_t emc1403_is_visible(const void *data, enum hwmon_sensor_types type,
u32 attr, int channel)
{
switch (type) {
case hwmon_temp:
return emc1403_temp_is_visible(data, attr, channel);
+ case hwmon_chip:
+ return emc1403_chip_is_visible(data, attr);
default:
return 0;
}
}
static const struct hwmon_channel_info * const emc1403_info[] = {
+ HWMON_CHANNEL_INFO(chip, HWMON_C_UPDATE_INTERVAL),
HWMON_CHANNEL_INFO(temp,
HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
HWMON_T_CRIT | HWMON_T_MIN_HYST | HWMON_T_MAX_HYST |
--
2.39.2
I have tested these patches on EMC1438. This has also worked well for me.
Regards,
Lars Petter
On Mon, May 06, 2024 at 04:44:12PM +0200, Lars Petter Mostad wrote:
> I have tested these patches on EMC1438. This has also worked well for me.
>
Great, thanks a lot!
It would be great if you can reply to the patches with a
Tested-by: tag.
Also, could you send me a register dump of emc1438 ?
I'd like to use a real register dump for the unit test code if possible.
Thanks,
Guenter
> It would be great if you can reply to the patches with a
> Tested-by: tag.
Tested-by: Lars Petter Mostad <[email protected]>
Of course, I had to do some light modifications to the patches to be able
to test on emc1438. I will post these modifications as an RFC patch once
the above patches are available on the hwmon-next (right?) branch.
Note that checkpatch.pl --strict fails a couple of checks.
> Also, could you send me a register dump of emc1438 ?
> I'd like to use a real register dump for the unit test code if possible.
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 2b 2d 00 80 06 55 00 55 00 80 06 55 00 55 00 00
10: 00 00 00 00 00 55 00 00 00 55 55 00 00 00 00 00
20: 55 0a 70 2d 00 0d 0d 00 00 80 00 00 55 00 00 00
30: 55 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 2b 60 00 00 2e c0 00 00 00 00 00 00 00 00 00
50: 55 00 00 00 55 00 00 00 55 00 00 00 55 00 00 00
60: 0e 00 00 00 55 55 55 55 00 00 00 00 00 00 00 00
70: 00 0f 0f 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 6b 60 00 00 23 00 3f 13 ad 03 20 02
b0: 20 00 00 00 20 00 20 00 00 00 00 00 12 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 59 5d 00
Regards,
Lars Petter
Hi Lars,
On Tue, May 07, 2024 at 01:27:44PM +0200, Lars Petter Mostad wrote:
> > It would be great if you can reply to the patches with a
> > Tested-by: tag.
>
> Tested-by: Lars Petter Mostad <[email protected]>
>
> Of course, I had to do some light modifications to the patches to be able
> to test on emc1438. I will post these modifications as an RFC patch once
> the above patches are available on the hwmon-next (right?) branch.
>
Yes. Patches are there now.
> Note that checkpatch.pl --strict fails a couple of checks.
>
Odd; not for me. I see a couple of CHECK messages when running it on the
driver.
CHECK: struct mutex definition without comment
CHECK: Alignment should match open parenthesis
However I don't see any messages when running it on the patches.
Please send me the log.
> > Also, could you send me a register dump of emc1438 ?
> > I'd like to use a real register dump for the unit test code if possible.
>
> 0 1 2 3 4 5 6 7 8 9 a b c d e f
> 00: 2b 2d 00 80 06 55 00 55 00 80 06 55 00 55 00 00
> 10: 00 00 00 00 00 55 00 00 00 55 55 00 00 00 00 00
> 20: 55 0a 70 2d 00 0d 0d 00 00 80 00 00 55 00 00 00
> 30: 55 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 00 2b 60 00 00 2e c0 00 00 00 00 00 00 00 00 00
> 50: 55 00 00 00 55 00 00 00 55 00 00 00 55 00 00 00
> 60: 0e 00 00 00 55 55 55 55 00 00 00 00 00 00 00 00
> 70: 00 0f 0f 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 6b 60 00 00 23 00 3f 13 ad 03 20 02
> b0: 20 00 00 00 20 00 20 00 00 00 00 00 12 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 59 5d 00
>
Great, thanks!
Guenter