ci_leaf_init() is a declared static function. The implementation of the
function body and the caller do not use the parameter (struct device_node
*node) input parameter, so remove it.
Fixes: 6a24915145c9 ("Revert "riscv: Set more data to cacheinfo"")
Signed-off-by: Yunhui Cui <[email protected]>
Reviewed-by: Jeremy Linton <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
---
arch/riscv/kernel/cacheinfo.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/arch/riscv/kernel/cacheinfo.c b/arch/riscv/kernel/cacheinfo.c
index 09e9b88110d1..30a6878287ad 100644
--- a/arch/riscv/kernel/cacheinfo.c
+++ b/arch/riscv/kernel/cacheinfo.c
@@ -64,7 +64,6 @@ uintptr_t get_cache_geometry(u32 level, enum cache_type type)
}
static void ci_leaf_init(struct cacheinfo *this_leaf,
- struct device_node *node,
enum cache_type type, unsigned int level)
{
this_leaf->level = level;
@@ -80,11 +79,11 @@ int populate_cache_leaves(unsigned int cpu)
int levels = 1, level = 1;
if (of_property_read_bool(np, "cache-size"))
- ci_leaf_init(this_leaf++, np, CACHE_TYPE_UNIFIED, level);
+ ci_leaf_init(this_leaf++, CACHE_TYPE_UNIFIED, level);
if (of_property_read_bool(np, "i-cache-size"))
- ci_leaf_init(this_leaf++, np, CACHE_TYPE_INST, level);
+ ci_leaf_init(this_leaf++, CACHE_TYPE_INST, level);
if (of_property_read_bool(np, "d-cache-size"))
- ci_leaf_init(this_leaf++, np, CACHE_TYPE_DATA, level);
+ ci_leaf_init(this_leaf++, CACHE_TYPE_DATA, level);
prev = np;
while ((np = of_find_next_cache_node(np))) {
@@ -97,11 +96,11 @@ int populate_cache_leaves(unsigned int cpu)
if (level <= levels)
break;
if (of_property_read_bool(np, "cache-size"))
- ci_leaf_init(this_leaf++, np, CACHE_TYPE_UNIFIED, level);
+ ci_leaf_init(this_leaf++, CACHE_TYPE_UNIFIED, level);
if (of_property_read_bool(np, "i-cache-size"))
- ci_leaf_init(this_leaf++, np, CACHE_TYPE_INST, level);
+ ci_leaf_init(this_leaf++, CACHE_TYPE_INST, level);
if (of_property_read_bool(np, "d-cache-size"))
- ci_leaf_init(this_leaf++, np, CACHE_TYPE_DATA, level);
+ ci_leaf_init(this_leaf++, CACHE_TYPE_DATA, level);
levels = level;
}
of_node_put(np);
--
2.20.1
Before cacheinfo can be built correctly, we need to initialize level
and type. Since RISC-V currently does not have a register group that
describes cache-related attributes like ARM64, we cannot obtain them
directly, so now we obtain cache leaves from the ACPI PPTT table
(acpi_get_cache_info()) and set the cache type through split_levels.
Suggested-by: Jeremy Linton <[email protected]>
Suggested-by: Sudeep Holla <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Sunil V L <[email protected]>
Signed-off-by: Yunhui Cui <[email protected]>
---
arch/riscv/kernel/cacheinfo.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/riscv/kernel/cacheinfo.c b/arch/riscv/kernel/cacheinfo.c
index 30a6878287ad..d6c108c50cba 100644
--- a/arch/riscv/kernel/cacheinfo.c
+++ b/arch/riscv/kernel/cacheinfo.c
@@ -3,6 +3,7 @@
* Copyright (C) 2017 SiFive
*/
+#include <linux/acpi.h>
#include <linux/cpu.h>
#include <linux/of.h>
#include <asm/cacheinfo.h>
@@ -78,6 +79,27 @@ int populate_cache_leaves(unsigned int cpu)
struct device_node *prev = NULL;
int levels = 1, level = 1;
+ if (!acpi_disabled) {
+ int ret, fw_levels, split_levels;
+
+ ret = acpi_get_cache_info(cpu, &fw_levels, &split_levels);
+ if (ret)
+ return ret;
+
+ BUG_ON((split_levels > fw_levels) ||
+ (split_levels + fw_levels > this_cpu_ci->num_leaves));
+
+ for (; level <= this_cpu_ci->num_levels; level++) {
+ if (level <= split_levels) {
+ ci_leaf_init(this_leaf++, CACHE_TYPE_DATA, level);
+ ci_leaf_init(this_leaf++, CACHE_TYPE_INST, level);
+ } else {
+ ci_leaf_init(this_leaf++, CACHE_TYPE_UNIFIED, level);
+ }
+ }
+ return 0;
+ }
+
if (of_property_read_bool(np, "cache-size"))
ci_leaf_init(this_leaf++, CACHE_TYPE_UNIFIED, level);
if (of_property_read_bool(np, "i-cache-size"))
--
2.20.1
After adding ACPI support to populate_cache_leaves(), RISC-V can build
cacheinfo through the ACPI PPTT table, thus enabling the ACPI_PPTT
configuration.
Signed-off-by: Yunhui Cui <[email protected]>
Reviewed-by: Jeremy Linton <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
---
arch/riscv/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index f961449ca077..a9ebecd72052 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -14,6 +14,7 @@ config RISCV
def_bool y
select ACPI_GENERIC_GSI if ACPI
select ACPI_REDUCED_HARDWARE_ONLY if ACPI
+ select ACPI_PPTT if ACPI
select ARCH_DMA_DEFAULT_COHERENT
select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
--
2.20.1
Hi,
On 5/9/24 02:32, Yunhui Cui wrote:
> Before cacheinfo can be built correctly, we need to initialize level
> and type. Since RISC-V currently does not have a register group that
> describes cache-related attributes like ARM64, we cannot obtain them
> directly, so now we obtain cache leaves from the ACPI PPTT table
> (acpi_get_cache_info()) and set the cache type through split_levels.
>
> Suggested-by: Jeremy Linton <[email protected]>
> Suggested-by: Sudeep Holla <[email protected]>
> Reviewed-by: Conor Dooley <[email protected]>
> Reviewed-by: Sunil V L <[email protected]>
> Signed-off-by: Yunhui Cui <[email protected]>
> ---
> arch/riscv/kernel/cacheinfo.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/riscv/kernel/cacheinfo.c b/arch/riscv/kernel/cacheinfo.c
> index 30a6878287ad..d6c108c50cba 100644
> --- a/arch/riscv/kernel/cacheinfo.c
> +++ b/arch/riscv/kernel/cacheinfo.c
> @@ -3,6 +3,7 @@
> * Copyright (C) 2017 SiFive
> */
>
> +#include <linux/acpi.h>
> #include <linux/cpu.h>
> #include <linux/of.h>
> #include <asm/cacheinfo.h>
> @@ -78,6 +79,27 @@ int populate_cache_leaves(unsigned int cpu)
> struct device_node *prev = NULL;
> int levels = 1, level = 1;
>
> + if (!acpi_disabled) {
> + int ret, fw_levels, split_levels;
> +
> + ret = acpi_get_cache_info(cpu, &fw_levels, &split_levels);
> + if (ret)
> + return ret;
> +
> + BUG_ON((split_levels > fw_levels) ||
> + (split_levels + fw_levels > this_cpu_ci->num_leaves));
> +
> + for (; level <= this_cpu_ci->num_levels; level++) {
> + if (level <= split_levels) {
> + ci_leaf_init(this_leaf++, CACHE_TYPE_DATA, level);
> + ci_leaf_init(this_leaf++, CACHE_TYPE_INST, level);
> + } else {
> + ci_leaf_init(this_leaf++, CACHE_TYPE_UNIFIED, level);
> + }
> + }
> + return 0;
> + }
> +
> if (of_property_read_bool(np, "cache-size"))
> ci_leaf_init(this_leaf++, CACHE_TYPE_UNIFIED, level);
> if (of_property_read_bool(np, "i-cache-size"))
Yes, still looks good.
Reviewed-by: Jeremy Linton <[email protected]>
Thanks,
On Thu, May 09, 2024 at 03:32:59PM +0800, Yunhui Cui wrote:
> Before cacheinfo can be built correctly, we need to initialize level
> and type. Since RISC-V currently does not have a register group that
> describes cache-related attributes like ARM64, we cannot obtain them
> directly, so now we obtain cache leaves from the ACPI PPTT table
> (acpi_get_cache_info()) and set the cache type through split_levels.
>
> Suggested-by: Jeremy Linton <[email protected]>
> Suggested-by: Sudeep Holla <[email protected]>
I am not sure why you have not added my reviewed-by as I was happy with
v3 onwards IIRC. Anyways, I will give it again ????
Reviewed-by: Sudeep Holla <[email protected]>
--
Regards,
Sudeep