Hi,
This series adds the I2C and SPI busses found on the Qcom's
SoC SDX75.
Thanks,
Rohit.
Rohit Agarwal (2):
dt-bindings: dma: qcom,gpi: document the SDX75 GPI DMA Engine
arm64: dts: qcom: sdx75: Support for I2C and SPI
.../devicetree/bindings/dma/qcom,gpi.yaml | 1 +
arch/arm64/boot/dts/qcom/sdx75.dtsi | 431 ++++++++++++++++++
2 files changed, 432 insertions(+)
--
2.25.1
From: Rohit Agarwal <[email protected]>
Add devicetree node for I2C and SPI busses in SDX75.
Signed-off-by: Rohit Agarwal <[email protected]>
---
arch/arm64/boot/dts/qcom/sdx75.dtsi | 431 ++++++++++++++++++++++++++++
1 file changed, 431 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
index da1704061d58..5e0204b3ef7b 100644
--- a/arch/arm64/boot/dts/qcom/sdx75.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,sdx75-gcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,sdx75.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -441,6 +442,28 @@ gcc: clock-controller@80000 {
#power-domain-cells = <1>;
};
+ gpi_dma: dma-controller@900000 {
+ compatible = "qcom,sdx75-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0x0 0x00900000 0x0 0x60000>;
+ #dma-cells = <3>;
+ interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <12>;
+ dma-channel-mask = <0x7f>;
+ iommus = <&apps_smmu 0xf6 0x0>;
+ status = "disabled";
+ };
+
qupv3_id_0: geniqup@9c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x009c0000 0x0 0x2000>;
@@ -457,6 +480,52 @@ qupv3_id_0: geniqup@9c0000 {
ranges;
status = "disabled";
+ i2c0: i2c@980000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00980000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&qup_i2c0_data_clk>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi0: spi@980000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00980000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
uart1: serial@984000 {
compatible = "qcom,geni-debug-uart";
reg = <0x0 0x00984000 0x0 0x4000>;
@@ -475,6 +544,229 @@ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
"sleep";
status = "disabled";
};
+
+ i2c2: i2c@988000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00988000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&qup_i2c2_data_clk>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi2: spi@988000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00988000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ i2c3: i2c@98c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x0098c000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&qup_i2c3_data_clk>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi3: spi@98c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x0098c000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ uart4: serial@990000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0x00990000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_uart4_default>, <&qup_uart4_cts_rts>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ i2c5: i2c@994000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00994000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&qup_i2c5_data_clk>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ i2c6: i2c@998000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00998000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&qup_i2c6_data_clk>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi6: spi@998000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00998000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ i2c7: i2c@99c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x0099c000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&qup_i2c7_data_clk>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi7: spi@99c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x0099c000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+ pinctrl-names = "default";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
};
usb_hsphy: phy@ff4000 {
@@ -661,6 +953,145 @@ tlmm: pinctrl@f000000 {
#interrupt-cells = <2>;
wakeup-parent = <&pdc>;
+ qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio8", "gpio9";
+ function = "qup_se0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio14", "gpio15";
+ function = "qup_se2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio52", "gpio53";
+ function = "qup_se3";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio110", "gpio111";
+ function = "qup_se5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio112", "gpio113";
+ function = "qup_se6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio116", "gpio117";
+ function = "qup_se7";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_spi0_cs: qup-spi0-cs-state {
+ pins = "gpio11";
+ function = "qup_se0";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ qup_spi0_data_clk: qup-spi0-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio8", "gpio9", "gpio10";
+ function = "qup_se0";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ qup_spi2_cs: qup-spi2-cs-state {
+ pins = "gpio17";
+ function = "qup_se2";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ qup_spi2_data_clk: qup-spi2-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio14", "gpio15", "gpio16";
+ function = "qup_se2";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ qup_spi3_cs: qup-spi3-cs-state {
+ pins = "gpio55";
+ function = "qup_se3";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ qup_spi3_data_clk: qup-spi3-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio52", "gpio53", "gpio54";
+ function = "qup_se3";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ qup_spi6_cs: qup-spi6-cs-state {
+ pins = "gpio115";
+ function = "qup_se6";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ qup_spi6_data_clk: qup-spi6-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio112", "gpio113", "gpio114";
+ function = "qup_se6";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ qup_spi7_cs: qup-spi7-cs-state {
+ pins = "gpio119";
+ function = "qup_se7";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ qup_spi7_data_clk: qup-spi7-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio116", "gpio117", "gpio118";
+ function = "qup_se7";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ qup_uart4_cts_rts: qup-uart4-cts-rts-state {
+ /* CTS, RTS */
+ pins = "gpio52", "gpio53";
+ function = "qup_se3";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ qup_uart4_default: qup-uart4-default-state {
+ /* TX, RX */
+ pins = "gpio54", "gpio55";
+ function = "qup_se3";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
qupv3_se1_2uart_active: qupv3-se1-2uart-active-state {
tx-pins {
pins = "gpio12";
--
2.25.1
Document the GPI DMA Engine on the SDX75 Platform.
Signed-off-by: Rohit Agarwal <[email protected]>
---
Documentation/devicetree/bindings/dma/qcom,gpi.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
index deb64cb9ca3e..4df4e61895d2 100644
--- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
+++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
@@ -27,6 +27,7 @@ properties:
- qcom,qcm2290-gpi-dma
- qcom,qdu1000-gpi-dma
- qcom,sc7280-gpi-dma
+ - qcom,sdx75-gpi-dma
- qcom,sm6115-gpi-dma
- qcom,sm6375-gpi-dma
- qcom,sm8350-gpi-dma
--
2.25.1
On 17/05/2024 12:04, Rohit Agarwal wrote:
> Document the GPI DMA Engine on the SDX75 Platform.
>
> Signed-off-by: Rohit Agarwal <[email protected]>
> ---
> Documentation/devicetree/bindings/dma/qcom,gpi.yaml | 1 +
Acked-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On Fri, 17 May 2024 15:34:21 +0530, Rohit Agarwal wrote:
> This series adds the I2C and SPI busses found on the Qcom's
> SoC SDX75.
>
> Thanks,
> Rohit.
>
> Rohit Agarwal (2):
> dt-bindings: dma: qcom,gpi: document the SDX75 GPI DMA Engine
> arm64: dts: qcom: sdx75: Support for I2C and SPI
>
> [...]
Applied, thanks!
[2/2] arm64: dts: qcom: sdx75: Support for I2C and SPI
commit: e07c4a702eb0abbb200c07593cfc429338ec42bf
Best regards,
--
Bjorn Andersson <[email protected]>
On Fri, May 17, 2024 at 03:34:22PM +0530, Rohit Agarwal wrote:
> Document the GPI DMA Engine on the SDX75 Platform.
>
> Signed-off-by: Rohit Agarwal <[email protected]>
> ---
> Documentation/devicetree/bindings/dma/qcom,gpi.yaml | 1 +
> 1 file changed, 1 insertion(+)
Looks like this was missed, so I've applied it.
Rob