From: Andrey Konovalov <[email protected]>
After commit 8fea0c8fda30 ("usb: core: hcd: Convert from tasklet to BH
workqueue"), usb_giveback_urb_bh() runs in the BH workqueue with
interrupts enabled.
Thus, the remote coverage collection section in usb_giveback_urb_bh()->
__usb_hcd_giveback_urb() might be interrupted, and the interrupt handler
might invoke __usb_hcd_giveback_urb() again.
This breaks KCOV, as it does not support nested remote coverage collection
sections within the same context (neither in task nor in softirq).
Update kcov_remote_start/stop_usb_softirq() to disable interrupts for the
duration of the coverage collection section to avoid nested sections in
the softirq context (in addition to such in the task context, which are
already handled).
Reported-by: Tetsuo Handa <[email protected]>
Closes: https://lore.kernel.org/linux-usb/[email protected]/
Closes: https://syzkaller.appspot.com/bug?extid=0438378d6f157baae1a2
Suggested-by: Alan Stern <[email protected]>
Fixes: 8fea0c8fda30 ("usb: core: hcd: Convert from tasklet to BH workqueue")
Acked-by: Dmitry Vyukov <[email protected]>
Signed-off-by: Andrey Konovalov <[email protected]>
---
Changes v1->v2:
- Fix compiler error when CONFIG_KCOV=n.
---
drivers/usb/core/hcd.c | 12 ++++++-----
include/linux/kcov.h | 47 ++++++++++++++++++++++++++++++++++--------
2 files changed, 45 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index c0e005670d67..fb1aa0d4fc28 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1623,6 +1623,7 @@ static void __usb_hcd_giveback_urb(struct urb *urb)
struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
struct usb_anchor *anchor = urb->anchor;
int status = urb->unlinked;
+ unsigned long flags;
urb->hcpriv = NULL;
if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
@@ -1640,13 +1641,14 @@ static void __usb_hcd_giveback_urb(struct urb *urb)
/* pass ownership to the completion handler */
urb->status = status;
/*
- * This function can be called in task context inside another remote
- * coverage collection section, but kcov doesn't support that kind of
- * recursion yet. Only collect coverage in softirq context for now.
+ * Only collect coverage in the softirq context and disable interrupts
+ * to avoid scenarios with nested remote coverage collection sections
+ * that KCOV does not support.
+ * See the comment next to kcov_remote_start_usb_softirq() for details.
*/
- kcov_remote_start_usb_softirq((u64)urb->dev->bus->busnum);
+ flags = kcov_remote_start_usb_softirq((u64)urb->dev->bus->busnum);
urb->complete(urb);
- kcov_remote_stop_softirq();
+ kcov_remote_stop_softirq(flags);
usb_anchor_resume_wakeups(anchor);
atomic_dec(&urb->use_count);
diff --git a/include/linux/kcov.h b/include/linux/kcov.h
index b851ba415e03..1068a7318d89 100644
--- a/include/linux/kcov.h
+++ b/include/linux/kcov.h
@@ -55,21 +55,47 @@ static inline void kcov_remote_start_usb(u64 id)
/*
* The softirq flavor of kcov_remote_*() functions is introduced as a temporary
- * work around for kcov's lack of nested remote coverage sections support in
- * task context. Adding support for nested sections is tracked in:
- * https://bugzilla.kernel.org/show_bug.cgi?id=210337
+ * workaround for KCOV's lack of nested remote coverage sections support.
+ *
+ * Adding support is tracked in https://bugzilla.kernel.org/show_bug.cgi?id=210337.
+ *
+ * kcov_remote_start_usb_softirq():
+ *
+ * 1. Only collects coverage when called in the softirq context. This allows
+ * avoiding nested remote coverage collection sections in the task context.
+ * For example, USB/IP calls usb_hcd_giveback_urb() in the task context
+ * within an existing remote coverage collection section. Thus, KCOV should
+ * not attempt to start collecting coverage within the coverage collection
+ * section in __usb_hcd_giveback_urb() in this case.
+ *
+ * 2. Disables interrupts for the duration of the coverage collection section.
+ * This allows avoiding nested remote coverage collection sections in the
+ * softirq context (a softirq might occur during the execution of a work in
+ * the BH workqueue, which runs with in_serving_softirq() > 0).
+ * For example, usb_giveback_urb_bh() runs in the BH workqueue with
+ * interrupts enabled, so __usb_hcd_giveback_urb() might be interrupted in
+ * the middle of its remote coverage collection section, and the interrupt
+ * handler might invoke __usb_hcd_giveback_urb() again.
*/
-static inline void kcov_remote_start_usb_softirq(u64 id)
+static inline unsigned long kcov_remote_start_usb_softirq(u64 id)
{
- if (in_serving_softirq())
+ unsigned long flags = 0;
+
+ if (in_serving_softirq()) {
+ local_irq_save(flags);
kcov_remote_start_usb(id);
+ }
+
+ return flags;
}
-static inline void kcov_remote_stop_softirq(void)
+static inline void kcov_remote_stop_softirq(unsigned long flags)
{
- if (in_serving_softirq())
+ if (in_serving_softirq()) {
kcov_remote_stop();
+ local_irq_restore(flags);
+ }
}
#ifdef CONFIG_64BIT
@@ -103,8 +129,11 @@ static inline u64 kcov_common_handle(void)
}
static inline void kcov_remote_start_common(u64 id) {}
static inline void kcov_remote_start_usb(u64 id) {}
-static inline void kcov_remote_start_usb_softirq(u64 id) {}
-static inline void kcov_remote_stop_softirq(void) {}
+static inline unsigned long kcov_remote_start_usb_softirq(u64 id)
+{
+ return 0;
+}
+static inline void kcov_remote_stop_softirq(unsigned long flags) {}
#endif /* CONFIG_KCOV */
#endif /* _LINUX_KCOV_H */
--
2.25.1
On Tue, May 21, 2024 at 10:43:24PM +0200, [email protected] wrote:
> From: Andrey Konovalov <[email protected]>
>
> After commit 8fea0c8fda30 ("usb: core: hcd: Convert from tasklet to BH
> workqueue"), usb_giveback_urb_bh() runs in the BH workqueue with
> interrupts enabled.
>
> Thus, the remote coverage collection section in usb_giveback_urb_bh()->
> __usb_hcd_giveback_urb() might be interrupted, and the interrupt handler
> might invoke __usb_hcd_giveback_urb() again.
>
> This breaks KCOV, as it does not support nested remote coverage collection
> sections within the same context (neither in task nor in softirq).
>
> Update kcov_remote_start/stop_usb_softirq() to disable interrupts for the
> duration of the coverage collection section to avoid nested sections in
> the softirq context (in addition to such in the task context, which are
> already handled).
>
> Reported-by: Tetsuo Handa <[email protected]>
> Closes: https://lore.kernel.org/linux-usb/[email protected]/
> Closes: https://syzkaller.appspot.com/bug?extid=0438378d6f157baae1a2
> Suggested-by: Alan Stern <[email protected]>
> Fixes: 8fea0c8fda30 ("usb: core: hcd: Convert from tasklet to BH workqueue")
> Acked-by: Dmitry Vyukov <[email protected]>
> Signed-off-by: Andrey Konovalov <[email protected]>
>
> ---
>
> Changes v1->v2:
>
> - Fix compiler error when CONFIG_KCOV=n.
> ---
> drivers/usb/core/hcd.c | 12 ++++++-----
> include/linux/kcov.h | 47 ++++++++++++++++++++++++++++++++++--------
> 2 files changed, 45 insertions(+), 14 deletions(-)
Hi,
This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him
a patch that has triggered this response. He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created. Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.
You are receiving this message because of the following common error(s)
as indicated below:
- You have marked a patch with a "Fixes:" tag for a commit that is in an
older released kernel, yet you do not have a cc: stable line in the
signed-off-by area at all, which means that the patch will not be
applied to any older kernel releases. To properly fix this, please
follow the documented rules in the
Documentation/process/stable-kernel-rules.rst file for how to resolve
this.
If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.
thanks,
greg k-h's patch email bot