Revise ina233 config for yosemite4 schematic change
Signed-off-by: Delphine CC Chiu <[email protected]>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 20 ++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 0c7d85ff4360..67e3c787d675 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1034,28 +1034,38 @@ adc@37 {
};
power-sensor@40 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x40>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
power-sensor@41 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x41>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
power-sensor@42 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x42>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
power-sensor@43 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x43>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
power-sensor@44 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x44>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
temperature-sensor@4e {
--
2.25.1