Add ina233/ina28 support for medusa board adc sensors
Signed-off-by: Delphine CC Chiu <[email protected]>
---
.../dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index f4e37187bd5b..bacaa2208734 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -915,6 +915,19 @@ power-sensor@40 {
reg = <0x40>;
};
+ power-sensor@41 {
+ compatible = "ti,ina233";
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
+ reg = <0x41>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina238";
+ shunt-resistor = <1000>;
+ reg = <0x44>;
+ };
+
temperature-sensor@48 {
compatible = "ti,tmp75";
reg = <0x48>;
--
2.25.1