Add DT bindings, relevant DT defines, DTS nodes and driver changes
required to enable the remoteprocs on sa8775p.
Signed-off-by: Bartosz Golaszewski <[email protected]>
---
Changes in v2:
- Move the DT bindings for sa8775p-pas into a separate file
- Link to v1: https://lore.kernel.org/r/20240522-topic-lemans-iot-remoteproc-v1-0-af9fab7b27f0@linaro.org
---
Bartosz Golaszewski (2):
dt-bindings: remoteproc: qcom,sa8775p-pas: Document the SA8775p ADSP, CDSP and GPDSP
arm64: dts: qcom: sa8775p-ride: enable remoteprocs
Tengfei Fan (3):
dt-bindings: mailbox: qcom-ipcc: Add GPDSP0 and GPDSP1 clients
remoteproc: qcom_q6v5_pas: Add support for SA8775p ADSP, CDSP and GPDSP
arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes
.../bindings/remoteproc/qcom,sa8775p-pas.yaml | 177 +++++++++++
arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 25 ++
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 332 +++++++++++++++++++++
drivers/remoteproc/qcom_q6v5_pas.c | 92 ++++++
include/dt-bindings/mailbox/qcom-ipcc.h | 2 +
5 files changed, 628 insertions(+)
---
base-commit: 3689b0ef08b70e4e03b82ebd37730a03a672853a
change-id: 20240507-topic-lemans-iot-remoteproc-6647b50281e2
Best regards,
--
Bartosz Golaszewski <[email protected]>
From: Bartosz Golaszewski <[email protected]>
Enable all remoteproc nodes on the sa8775p-ride board and point to the
appropriate firmware files.
Signed-off-by: Bartosz Golaszewski <[email protected]>
---
arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 26ad05bd3b3f..071fcaf09364 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -727,6 +727,31 @@ &pcie1_phy {
status = "okay";
};
+&remoteproc_adsp {
+ firmware-name = "qcom/sa8775p/adsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp0 {
+ firmware-name = "qcom/sa8775p/cdsp0.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp1 {
+ firmware-name = "qcom/sa8775p/cdsp1.mbn";
+ status = "okay";
+};
+
+&remoteproc_gpdsp0 {
+ firmware-name = "qcom/sa8775p/gpdsp0.mbn";
+ status = "okay";
+};
+
+&remoteproc_gpdsp1 {
+ firmware-name = "qcom/sa8775p/gpdsp1.mbn";
+ status = "okay";
+};
+
&uart10 {
compatible = "qcom,geni-debug-uart";
pinctrl-0 = <&qup_uart10_default>;
--
2.43.0
From: Tengfei Fan <[email protected]>
Add GPDSP0 and GPDSP1 clients for SA8775p platform.
Signed-off-by: Tengfei Fan <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
---
include/dt-bindings/mailbox/qcom-ipcc.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/dt-bindings/mailbox/qcom-ipcc.h b/include/dt-bindings/mailbox/qcom-ipcc.h
index fbfa3febc66d..fd85a79381b3 100644
--- a/include/dt-bindings/mailbox/qcom-ipcc.h
+++ b/include/dt-bindings/mailbox/qcom-ipcc.h
@@ -33,5 +33,7 @@
#define IPCC_CLIENT_NSP1 18
#define IPCC_CLIENT_TME 23
#define IPCC_CLIENT_WPSS 24
+#define IPCC_CLIENT_GPDSP0 31
+#define IPCC_CLIENT_GPDSP1 32
#endif
--
2.43.0
From: Tengfei Fan <[email protected]>
Add nodes for remoteprocs: ADSP, CDSP0, CDSP1, GPDSP0 and GPDSP1 for
SA8775p SoCs.
Signed-off-by: Tengfei Fan <[email protected]>
Co-developed-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 332 ++++++++++++++++++++++++++++++++++
1 file changed, 332 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 31de73594839..5c0b61a5624b 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -544,6 +545,121 @@ cpucp_fw_mem: cpucp-fw@db200000 {
};
};
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp0 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ smp2p_cdsp0_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_cdsp0_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp1 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <617>, <616>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_NSP1 IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <12>;
+
+ smp2p_cdsp1_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_cdsp1_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-gpdsp0 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <617>, <616>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_GPDSP0 IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <17>;
+
+ smp2p_gpdsp0_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_gpdsp0_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-gpdsp1 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <617>, <616>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_GPDSP1 IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <18>;
+
+ smp2p_gpdsp1_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_gpdsp1_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
soc: soc@0 {
compatible = "simple-bus";
#address-cells = <2>;
@@ -2479,6 +2595,92 @@ cpufreq_hw: cpufreq@18591000 {
#freq-domain-cells = <1>;
};
+ remoteproc_gpdsp0: remoteproc@20c00000 {
+ compatible = "qcom,sa8775p-gpdsp0-pas";
+ reg = <0x0 0x20c00000 0x0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_gpdsp0_in 0 0>,
+ <&smp2p_gpdsp0_in 2 0>,
+ <&smp2p_gpdsp0_in 1 0>,
+ <&smp2p_gpdsp0_in 3 0>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>;
+ power-domain-names = "cx", "mxc";
+
+ interconnects = <&gpdsp_anoc MASTER_DSP0 0
+ &config_noc SLAVE_CLK_CTL 0>;
+
+ memory-region = <&pil_gdsp0_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_gpdsp0_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_GPDSP0
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "gpdsp0";
+ qcom,remote-pid = <17>;
+ };
+ };
+
+ remoteproc_gpdsp1: remoteproc@21c00000 {
+ compatible = "qcom,sa8775p-gpdsp1-pas";
+ reg = <0x0 0x21c00000 0x0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 624 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_gpdsp1_in 0 0>,
+ <&smp2p_gpdsp1_in 2 0>,
+ <&smp2p_gpdsp1_in 1 0>,
+ <&smp2p_gpdsp1_in 3 0>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>;
+ power-domain-names = "cx", "mxc";
+
+ interconnects = <&gpdsp_anoc MASTER_DSP1 0
+ &config_noc SLAVE_CLK_CTL 0>;
+
+ memory-region = <&pil_gdsp1_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_gpdsp1_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_GPDSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "gpdsp1";
+ qcom,remote-pid = <18>;
+ };
+ };
+
ethernet1: ethernet@23000000 {
compatible = "qcom,sa8775p-ethqos";
reg = <0x0 0x23000000 0x0 0x10000>,
@@ -2546,6 +2748,136 @@ ethernet0: ethernet@23040000 {
status = "disabled";
};
+
+ remoteproc_cdsp0: remoteproc@26300000 {
+ compatible = "qcom,sa8775p-cdsp0-pas";
+ reg = <0x0 0x26300000 0x0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp0_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp0_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp0_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_NSP0>;
+ power-domain-names = "cx", "mxc", "nsp0";
+
+ interconnects = <&nspa_noc MASTER_CDSP_PROC 0
+ &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&pil_cdsp0_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_cdsp0_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "cdsp";
+ qcom,remote-pid = <5>;
+ };
+ };
+
+ remoteproc_cdsp1: remoteproc@2a300000 {
+ compatible = "qcom,sa8775p-cdsp1-pas";
+ reg = <0x0 0x2A300000 0x0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp1_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp1_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp1_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_NSP1>;
+ power-domain-names = "cx", "mxc", "nsp1";
+
+ interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0
+ &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&pil_cdsp1_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_cdsp1_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "cdsp1";
+ qcom,remote-pid = <12>;
+ };
+ };
+
+ remoteproc_adsp: remoteproc@30000000 {
+ compatible = "qcom,sa8775p-adsp-pas";
+ reg = <0x0 0x30000000 0x0 0x100>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&pil_adsp_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ remoteproc_adsp_glink: glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ };
+ };
};
thermal-zones {
--
2.43.0
On 5/27/2024 4:43 PM, Bartosz Golaszewski wrote:
> From: Tengfei Fan <[email protected]>
>
> Add nodes for remoteprocs: ADSP, CDSP0, CDSP1, GPDSP0 and GPDSP1 for
> SA8775p SoCs.
>
> Signed-off-by: Tengfei Fan <[email protected]>
> Co-developed-by: Bartosz Golaszewski <[email protected]>
> Signed-off-by: Bartosz Golaszewski <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 332 ++++++++++++++++++++++++++++++++++
> 1 file changed, 332 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index 31de73594839..5c0b61a5624b 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -10,6 +10,7 @@
> #include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
> #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
> #include <dt-bindings/mailbox/qcom-ipcc.h>
> +#include <dt-bindings/power/qcom,rpmhpd.h>
> #include <dt-bindings/power/qcom-rpmpd.h>
> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>
> @@ -544,6 +545,121 @@ cpucp_fw_mem: cpucp-fw@db200000 {
> };
> };
>
> + smp2p-adsp {
> + compatible = "qcom,smp2p";
> + qcom,smem = <443>, <429>;
> + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_SMP2P
> + IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_SMP2P>;
> +
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <2>;
> +
> + smp2p_adsp_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + smp2p_adsp_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + smp2p-cdsp0 {
> + compatible = "qcom,smp2p";
> + qcom,smem = <94>, <432>;
> + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
> + IPCC_MPROC_SIGNAL_SMP2P
> + IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_SMP2P>;
> +
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <5>;
> +
> + smp2p_cdsp0_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + smp2p_cdsp0_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + smp2p-cdsp1 {
> + compatible = "qcom,smp2p";
> + qcom,smem = <617>, <616>;
> + interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
> + IPCC_MPROC_SIGNAL_SMP2P
> + IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_NSP1 IPCC_MPROC_SIGNAL_SMP2P>;
> +
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <12>;
> +
> + smp2p_cdsp1_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + smp2p_cdsp1_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + smp2p-gpdsp0 {
> + compatible = "qcom,smp2p";
> + qcom,smem = <617>, <616>;
> + interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
> + IPCC_MPROC_SIGNAL_SMP2P
> + IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_GPDSP0 IPCC_MPROC_SIGNAL_SMP2P>;
> +
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <17>;
> +
> + smp2p_gpdsp0_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + smp2p_gpdsp0_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + smp2p-gpdsp1 {
> + compatible = "qcom,smp2p";
> + qcom,smem = <617>, <616>;
> + interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1
> + IPCC_MPROC_SIGNAL_SMP2P
> + IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_GPDSP1 IPCC_MPROC_SIGNAL_SMP2P>;
> +
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <18>;
> +
> + smp2p_gpdsp1_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + smp2p_gpdsp1_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> soc: soc@0 {
> compatible = "simple-bus";
> #address-cells = <2>;
> @@ -2479,6 +2595,92 @@ cpufreq_hw: cpufreq@18591000 {
> #freq-domain-cells = <1>;
> };
>
> + remoteproc_gpdsp0: remoteproc@20c00000 {
> + compatible = "qcom,sa8775p-gpdsp0-pas";
> + reg = <0x0 0x20c00000 0x0 0x10000>;
> +
> + interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_gpdsp0_in 0 0>,
> + <&smp2p_gpdsp0_in 2 0>,
> + <&smp2p_gpdsp0_in 1 0>,
> + <&smp2p_gpdsp0_in 3 0>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
> +
> + power-domains = <&rpmhpd RPMHPD_CX>,
> + <&rpmhpd RPMHPD_MXC>;
> + power-domain-names = "cx", "mxc";
> +
> + interconnects = <&gpdsp_anoc MASTER_DSP0 0
> + &config_noc SLAVE_CLK_CTL 0>;
> +
> + memory-region = <&pil_gdsp0_mem>;
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + qcom,smem-states = <&smp2p_gpdsp0_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
> + IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_GPDSP0
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + label = "gpdsp0";
> + qcom,remote-pid = <17>;
> + };
> + };
> +
> + remoteproc_gpdsp1: remoteproc@21c00000 {
> + compatible = "qcom,sa8775p-gpdsp1-pas";
> + reg = <0x0 0x21c00000 0x0 0x10000>;
> +
> + interrupts-extended = <&intc GIC_SPI 624 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_gpdsp1_in 0 0>,
> + <&smp2p_gpdsp1_in 2 0>,
> + <&smp2p_gpdsp1_in 1 0>,
> + <&smp2p_gpdsp1_in 3 0>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
> +
> + power-domains = <&rpmhpd RPMHPD_CX>,
> + <&rpmhpd RPMHPD_MXC>;
> + power-domain-names = "cx", "mxc";
> +
> + interconnects = <&gpdsp_anoc MASTER_DSP1 0
> + &config_noc SLAVE_CLK_CTL 0>;
> +
> + memory-region = <&pil_gdsp1_mem>;
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + qcom,smem-states = <&smp2p_gpdsp1_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1
> + IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_GPDSP1
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + label = "gpdsp1";
> + qcom,remote-pid = <18>;
> + };
> + };
> +
> ethernet1: ethernet@23000000 {
> compatible = "qcom,sa8775p-ethqos";
> reg = <0x0 0x23000000 0x0 0x10000>,
> @@ -2546,6 +2748,136 @@ ethernet0: ethernet@23040000 {
>
> status = "disabled";
> };
> +
> + remoteproc_cdsp0: remoteproc@26300000 {
> + compatible = "qcom,sa8775p-cdsp0-pas";
> + reg = <0x0 0x26300000 0x0 0x10000>;
> +
> + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp0_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp0_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp0_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
> +
> + power-domains = <&rpmhpd RPMHPD_CX>,
> + <&rpmhpd RPMHPD_MXC>,
> + <&rpmhpd RPMHPD_NSP0>;
> + power-domain-names = "cx", "mxc", "nsp0";
s/nsp0/nsp/
> +
> + interconnects = <&nspa_noc MASTER_CDSP_PROC 0
> + &mc_virt SLAVE_EBI1 0>;
> +
> + memory-region = <&pil_cdsp0_mem>;
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + qcom,smem-states = <&smp2p_cdsp0_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
> + IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_CDSP
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + label = "cdsp";
> + qcom,remote-pid = <5>;
> + };
> + };
> +
> + remoteproc_cdsp1: remoteproc@2a300000 {
> + compatible = "qcom,sa8775p-cdsp1-pas";
> + reg = <0x0 0x2A300000 0x0 0x10000>;
> +
> + interrupts-extended = <&intc GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp1_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp1_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp1_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
> +
> + power-domains = <&rpmhpd RPMHPD_CX>,
> + <&rpmhpd RPMHPD_MXC>,
> + <&rpmhpd RPMHPD_NSP1>;
> + power-domain-names = "cx", "mxc", "nsp1";
s/nsp1/nsp/
> +
> + interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0
> + &mc_virt SLAVE_EBI1 0>;
> +
> + memory-region = <&pil_cdsp1_mem>;
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + qcom,smem-states = <&smp2p_cdsp1_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
> + IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_NSP1
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + label = "cdsp1";
> + qcom,remote-pid = <12>;
> + };
> + };
> +
> + remoteproc_adsp: remoteproc@30000000 {
> + compatible = "qcom,sa8775p-adsp-pas";
> + reg = <0x0 0x30000000 0x0 0x100>;
> +
> + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready", "handover",
> + "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
> +
> + power-domains = <&rpmhpd RPMHPD_LCX>,
> + <&rpmhpd RPMHPD_LMX>;
> + power-domain-names = "lcx", "lmx";
> +
> + interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
> +
> + memory-region = <&pil_adsp_mem>;
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + qcom,smem-states = <&smp2p_adsp_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + remoteproc_adsp_glink: glink-edge {
> + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + label = "lpass";
> + qcom,remote-pid = <2>;
> + };
> + };
> };
>
> thermal-zones {
>
--
Thx and BRs,
Tengfei Fan