x86_of_pci_irq_enable() returns PCIBIOS_* code received from
pci_read_config_byte() directly and also -EINVAL which are not
compatible error types. x86_of_pci_irq_enable() is used as
(*pcibios_enable_irq) function which should not return PCIBIOS_* codes.
Convert the PCIBIOS_* return code from pci_read_config_byte() into
normal errno using pcibios_err_to_errno().
Fixes: 96e0a0797eba ("x86: dtb: Add support for PCI devices backed by dtb nodes")
Signed-off-by: Ilpo Järvinen <[email protected]>
Cc: [email protected]
---
arch/x86/kernel/devicetree.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 8e3c53b4d070..64280879c68c 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -83,7 +83,7 @@ static int x86_of_pci_irq_enable(struct pci_dev *dev)
ret = pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
if (ret)
- return ret;
+ return pcibios_err_to_errno(ret);
if (!pin)
return 0;
--
2.39.2
xen_pcifront_enable_irq() uses pci_read_config_byte() that returns
PCIBIOS_* codes. The error handling, however, assumes the codes are
normal errnos because it checks for < 0.
xen_pcifront_enable_irq() also returns the PCIBIOS_* code back to the
caller but the function is used as the (*pcibios_enable_irq) function
which should return normal errnos.
Convert the error check to plain non-zero check which works for
PCIBIOS_* return codes and convert the PCIBIOS_* return code using
pcibios_err_to_errno() into normal errno before returning it.
Fixes: 3f2a230caf21 ("xen: handled remapped IRQs when enabling a pcifront PCI device.")
Signed-off-by: Ilpo Järvinen <[email protected]>
Cc: [email protected]
---
arch/x86/pci/xen.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 652cd53e77f6..0f2fe524f60d 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -38,10 +38,10 @@ static int xen_pcifront_enable_irq(struct pci_dev *dev)
u8 gsi;
rc = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi);
- if (rc < 0) {
+ if (rc) {
dev_warn(&dev->dev, "Xen PCI: failed to read interrupt line: %d\n",
rc);
- return rc;
+ return pcibios_err_to_errno(rc);
}
/* In PV DomU the Xen PCI backend puts the PIRQ in the interrupt line.*/
pirq = gsi;
--
2.39.2
iosf_mbi_pci_{read,write}_mdr() use pci_{read,write}_config_dword()
that return PCIBIOS_* codes but functions also return -ENODEV which are
not compatible error codes. As neither of the functions are related to
PCI read/write functions, they should return normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning it.
Fixes: 46184415368a ("arch: x86: New MailBox support driver for Intel SOC's")
Signed-off-by: Ilpo Järvinen <[email protected]>
Cc: [email protected]
---
arch/x86/platform/intel/iosf_mbi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/platform/intel/iosf_mbi.c b/arch/x86/platform/intel/iosf_mbi.c
index fdd49d70b437..c81cea208c2c 100644
--- a/arch/x86/platform/intel/iosf_mbi.c
+++ b/arch/x86/platform/intel/iosf_mbi.c
@@ -62,7 +62,7 @@ static int iosf_mbi_pci_read_mdr(u32 mcrx, u32 mcr, u32 *mdr)
fail_read:
dev_err(&mbi_pdev->dev, "PCI config access failed with %d\n", result);
- return result;
+ return pcibios_err_to_errno(result);
}
static int iosf_mbi_pci_write_mdr(u32 mcrx, u32 mcr, u32 mdr)
@@ -91,7 +91,7 @@ static int iosf_mbi_pci_write_mdr(u32 mcrx, u32 mcr, u32 mdr)
fail_write:
dev_err(&mbi_pdev->dev, "PCI config access failed with %d\n", result);
- return result;
+ return pcibios_err_to_errno(result);
}
int iosf_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr)
--
2.39.2
intel_mid_pci_irq_enable() uses pci_read_config_byte() that returns
PCIBIOS_* codes. The error handling, however, assumes the codes are
normal errnos because it checks for < 0.
intel_mid_pci_irq_enable() also returns the PCIBIOS_* code back to the
caller but the function is used as the (*pcibios_enable_irq) function
which should return normal errnos.
Convert the error check to plain non-zero check which works for
PCIBIOS_* return codes and convert the PCIBIOS_* return code using
pcibios_err_to_errno() into normal errno before returning it.
Fixes: 5b395e2be6c4 ("x86/platform/intel-mid: Make IRQ allocation a bit more flexible")
Signed-off-by: Ilpo Järvinen <[email protected]>
Cc: [email protected]
---
arch/x86/pci/intel_mid_pci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
index 8edd62206604..722a33be08a1 100644
--- a/arch/x86/pci/intel_mid_pci.c
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -233,9 +233,9 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev)
return 0;
ret = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi);
- if (ret < 0) {
+ if (ret) {
dev_warn(&dev->dev, "Failed to read interrupt line: %d\n", ret);
- return ret;
+ return pcibios_err_to_errno(ret);
}
id = x86_match_cpu(intel_mid_cpu_ids);
--
2.39.2
On 27.05.24 14:55, Ilpo Järvinen wrote:
> xen_pcifront_enable_irq() uses pci_read_config_byte() that returns
> PCIBIOS_* codes. The error handling, however, assumes the codes are
> normal errnos because it checks for < 0.
>
> xen_pcifront_enable_irq() also returns the PCIBIOS_* code back to the
> caller but the function is used as the (*pcibios_enable_irq) function
> which should return normal errnos.
>
> Convert the error check to plain non-zero check which works for
> PCIBIOS_* return codes and convert the PCIBIOS_* return code using
> pcibios_err_to_errno() into normal errno before returning it.
>
> Fixes: 3f2a230caf21 ("xen: handled remapped IRQs when enabling a pcifront PCI device.")
> Signed-off-by: Ilpo Järvinen <[email protected]>
> Cc: [email protected]
Reviewed-by: Juergen Gross <[email protected]>
Juergen