The clk_set_parent for "enet1_ref_sel" and "enet2_ref_sel" are
incorrect, therefore the original requirements to have "enet_clk_ref" as
output sourced by iMX ENET PLL as a default config is not met.
Only "enet[1,2]_ref_125m" "enet[1,2]_ref_pad" are possible parents for
"enet1_ref_sel" and "enet2_ref_sel".
This was observed as a regression using a custom device tree which was
expecting this default config.
This can be fixed at the device tree level but having a default config
matching the original behavior (before refclock mux) will avoid breaking
existing configs.
Fixes: 4e197ee880c2 ("clk: imx6ul: add ethernet refclock mux support")
Link: https://lore.kernel.org/lkml/20230306020226.GC143566@dragon/T/
Signed-off-by: Sebastien Laveze <[email protected]>
---
drivers/clk/imx/clk-imx6ul.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index f9394e94f69d..05c7a82b751f 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -542,8 +542,8 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clk_set_parent(hws[IMX6UL_CLK_ENFC_SEL]->clk, hws[IMX6UL_CLK_PLL2_PFD2]->clk);
- clk_set_parent(hws[IMX6UL_CLK_ENET1_REF_SEL]->clk, hws[IMX6UL_CLK_ENET_REF]->clk);
- clk_set_parent(hws[IMX6UL_CLK_ENET2_REF_SEL]->clk, hws[IMX6UL_CLK_ENET2_REF]->clk);
+ clk_set_parent(hws[IMX6UL_CLK_ENET1_REF_SEL]->clk, hws[IMX6UL_CLK_ENET1_REF_125M]->clk);
+ clk_set_parent(hws[IMX6UL_CLK_ENET2_REF_SEL]->clk, hws[IMX6UL_CLK_ENET2_REF_125M]->clk);
imx_register_uart_clocks();
}
--
2.34.1