There's not much reason to have multiple fixed-factor-clock instances
which are all the same factor and clock input. Drop the nodes, but keep
the labels to minimize the changes and keep some distinction of the
different clocks.
Signed-off-by: Rob Herring (Arm) <[email protected]>
---
arch/arm/boot/dts/arm/arm-realview-eb.dtsi | 42 +------------------
arch/arm/boot/dts/arm/arm-realview-pb1176.dts | 34 +--------------
arch/arm/boot/dts/arm/arm-realview-pb11mp.dts | 42 +------------------
arch/arm/boot/dts/arm/arm-realview-pbx.dtsi | 42 +------------------
arch/arm/boot/dts/arm/integratorap.dts | 10 +----
arch/arm/boot/dts/arm/mps2.dtsi | 34 +--------------
6 files changed, 6 insertions(+), 198 deletions(-)
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
index 96f813f44cb3..b3ced3380b7d 100644
--- a/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
@@ -53,7 +53,7 @@ vmmc: fixedregulator@0 {
regulator-boot-on;
};
- xtal24mhz: xtal24mhz@24M {
+ xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -67,46 +67,6 @@ timclk: timclk@1M {
clocks = <&xtal24mhz>;
};
- mclk: mclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
- kmiclk: kmiclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
- sspclk: sspclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
- uartclk: uartclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
- wdogclk: wdogclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
/* FIXME: this actually hangs off the PLL clocks */
pclk: pclk@0 {
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
index e819e58e4b62..cd86986175d4 100644
--- a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
@@ -63,7 +63,7 @@ veth: regulator-veth {
regulator-boot-on;
};
- xtal24mhz: xtal24mhz@24M {
+ xtal24mhz: mclk: kmiclk: sspclk: uartclk: clock-24000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -77,38 +77,6 @@ timclk: timclk@1M {
clocks = <&xtal24mhz>;
};
- mclk: mclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
- kmiclk: kmiclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
- sspclk: sspclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
- uartclk: uartclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
/* FIXME: this actually hangs off the PLL clocks */
pclk: pclk@0 {
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
index 29afc5c05759..0988c2bd436b 100644
--- a/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
@@ -163,7 +163,7 @@ veth: regulator-veth {
regulator-boot-on;
};
- xtal24mhz: xtal24mhz@24M {
+ xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -183,46 +183,6 @@ timclk: timclk@1M {
clocks = <&xtal24mhz>;
};
- mclk: mclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
- kmiclk: kmiclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
- sspclk: sspclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
- uartclk: uartclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
- wdogclk: wdogclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
/* FIXME: this actually hangs off the PLL clocks */
pclk: pclk@0 {
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
index e715626db567..6a0e67998061 100644
--- a/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
@@ -62,7 +62,7 @@ veth: regulator-veth {
regulator-boot-on;
};
- xtal24mhz: xtal24mhz@24M {
+ xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -82,46 +82,6 @@ timclk: timclk@1M {
clocks = <&xtal24mhz>;
};
- mclk: mclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
- kmiclk: kmiclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
- sspclk: sspclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
- uartclk: uartclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
- wdogclk: wdogclk@24M {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
/* FIXME: this actually hangs off the PLL clocks */
pclk: pclk@0 {
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/arm/integratorap.dts b/arch/arm/boot/dts/arm/integratorap.dts
index d9927d3181dc..27498e0f93f6 100644
--- a/arch/arm/boot/dts/arm/integratorap.dts
+++ b/arch/arm/boot/dts/arm/integratorap.dts
@@ -57,20 +57,12 @@ chosen {
};
/* 24 MHz chrystal on the Integrator/AP development board */
- xtal24mhz: xtal24mhz@24M {
+ xtal24mhz: pclk: clock-24000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
- pclk: pclk@0 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&xtal24mhz>;
- };
-
/* The UART clock is 14.74 MHz divided by an ICS525 */
uartclk: [email protected] {
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/arm/mps2.dtsi b/arch/arm/boot/dts/arm/mps2.dtsi
index ce308820765b..d930168fbd91 100644
--- a/arch/arm/boot/dts/arm/mps2.dtsi
+++ b/arch/arm/boot/dts/arm/mps2.dtsi
@@ -78,7 +78,7 @@ spicfgclk: clk-spicfg {
clock-frequency = <75000000>;
};
- sysclk: clk-sys {
+ sysclk: spiclcd: spicon: i2cclcd: i2caud: clock-sys {
compatible = "fixed-factor-clock";
clocks = <&oscclk0>;
#clock-cells = <0>;
@@ -102,38 +102,6 @@ audsclk: clk-auds {
clock-mult = <1>;
};
- spiclcd: clk-cpiclcd {
- compatible = "fixed-factor-clock";
- clocks = <&oscclk0>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
-
- spicon: clk-spicon {
- compatible = "fixed-factor-clock";
- clocks = <&oscclk0>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
-
- i2cclcd: clk-i2cclcd {
- compatible = "fixed-factor-clock";
- clocks = <&oscclk0>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
-
- i2caud: clk-i2caud {
- compatible = "fixed-factor-clock";
- clocks = <&oscclk0>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
-
soc {
compatible = "simple-bus";
ranges;
--
2.43.0
With the recent defining of preferred naming for fixed clock and
regulator nodes, convert the Arm Ltd. boards to use the preferred
names. In the cases which had a unit-address, warnings about missing
"reg" property are fixed.
Signed-off-by: Rob Herring (Arm) <[email protected]>
---
.../boot/dts/arm/arm-realview-eb-bbrevd.dtsi | 2 +-
arch/arm/boot/dts/arm/arm-realview-eb.dtsi | 6 ++---
arch/arm/boot/dts/arm/arm-realview-pb1176.dts | 4 ++--
arch/arm/boot/dts/arm/arm-realview-pb11mp.dts | 6 ++---
arch/arm/boot/dts/arm/arm-realview-pbx.dtsi | 6 ++---
arch/arm/boot/dts/arm/integratorap-im-pd1.dts | 4 ++--
arch/arm/boot/dts/arm/integratorap.dts | 4 ++--
arch/arm/boot/dts/arm/integratorcp.dts | 14 ++++++------
arch/arm/boot/dts/arm/mps2.dtsi | 14 ++++++------
arch/arm/boot/dts/arm/versatile-ab.dts | 8 +++----
arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi | 8 +++----
arch/arm/boot/dts/arm/vexpress-v2m.dtsi | 16 +++++++-------
.../boot/dts/arm/vexpress-v2p-ca15-tc1.dts | 14 ++++++------
.../arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts | 22 +++++++++----------
arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts | 12 +++++-----
arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts | 18 +++++++--------
arch/arm64/boot/dts/arm/corstone1000-fvp.dts | 2 +-
arch/arm64/boot/dts/arm/corstone1000.dtsi | 6 ++---
arch/arm64/boot/dts/arm/foundation-v8.dtsi | 6 ++---
arch/arm64/boot/dts/arm/juno-clocks.dtsi | 10 ++++-----
arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 10 ++++-----
.../boot/dts/arm/rtsm_ve-motherboard.dtsi | 10 ++++-----
.../boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts | 6 ++---
23 files changed, 104 insertions(+), 104 deletions(-)
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi
index a79e1d1d30a7..7f62aef9ca8a 100644
--- a/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi
@@ -22,7 +22,7 @@
/ {
/* Introduce a fixed regulator for the new ethernet controller */
- veth: fixedregulator@0 {
+ veth: regulator-veth {
compatible = "regulator-fixed";
regulator-name = "veth";
regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
index b3ced3380b7d..c2e6c47b2555 100644
--- a/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
@@ -45,7 +45,7 @@ memory@0 {
};
/* The voltage to the MMC card is hardwired at 3.3V */
- vmmc: fixedregulator@0 {
+ vmmc: regulator-vmmc {
compatible = "regulator-fixed";
regulator-name = "vmmc";
regulator-min-microvolt = <3300000>;
@@ -59,7 +59,7 @@ xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
clock-frequency = <24000000>;
};
- timclk: timclk@1M {
+ timclk: clock-1000000 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
@@ -68,7 +68,7 @@ timclk: timclk@1M {
};
/* FIXME: this actually hangs off the PLL clocks */
- pclk: pclk@0 {
+ pclk: clock-pclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
diff --git a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
index cd86986175d4..8cd0cde2e946 100644
--- a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
@@ -69,7 +69,7 @@ xtal24mhz: mclk: kmiclk: sspclk: uartclk: clock-24000000 {
clock-frequency = <24000000>;
};
- timclk: timclk@1M {
+ timclk: clock-1000000 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
@@ -78,7 +78,7 @@ timclk: timclk@1M {
};
/* FIXME: this actually hangs off the PLL clocks */
- pclk: pclk@0 {
+ pclk: clock-pclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
diff --git a/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
index 0988c2bd436b..647dd5cdb2ed 100644
--- a/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
@@ -169,13 +169,13 @@ xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
clock-frequency = <24000000>;
};
- refclk32khz: refclk32khz {
+ refclk32khz: clock-32768 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
- timclk: timclk@1M {
+ timclk: clock-1000000 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
@@ -184,7 +184,7 @@ timclk: timclk@1M {
};
/* FIXME: this actually hangs off the PLL clocks */
- pclk: pclk@0 {
+ pclk: clock-pclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
diff --git a/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
index 6a0e67998061..4966cf408ea9 100644
--- a/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
@@ -68,13 +68,13 @@ xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
clock-frequency = <24000000>;
};
- refclk32khz: refclk32khz {
+ refclk32khz: clock-32768 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
- timclk: timclk@1M {
+ timclk: clock-1000000 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
@@ -83,7 +83,7 @@ timclk: timclk@1M {
};
/* FIXME: this actually hangs off the PLL clocks */
- pclk: pclk@0 {
+ pclk: clock-pclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
diff --git a/arch/arm/boot/dts/arm/integratorap-im-pd1.dts b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
index 367850ea0912..db13e09f2fab 100644
--- a/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
+++ b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
@@ -54,7 +54,7 @@ vco2: clock-controller@4 {
};
/* Also used for the Smart Card Interface SCI */
- impd1_uartclk: clock@1_4 {
+ impd1_uartclk: clock-uart {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <4>;
@@ -64,7 +64,7 @@ impd1_uartclk: clock@1_4 {
};
/* For the SSP the clock is divided by 64 */
- impd1_sspclk: clock@1_64 {
+ impd1_sspclk: clock-ssp {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <64>;
diff --git a/arch/arm/boot/dts/arm/integratorap.dts b/arch/arm/boot/dts/arm/integratorap.dts
index 27498e0f93f6..9b6a1dbaf265 100644
--- a/arch/arm/boot/dts/arm/integratorap.dts
+++ b/arch/arm/boot/dts/arm/integratorap.dts
@@ -64,7 +64,7 @@ xtal24mhz: pclk: clock-24000000 {
};
/* The UART clock is 14.74 MHz divided by an ICS525 */
- uartclk: [email protected] {
+ uartclk: clock-14745600 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <14745600>;
@@ -73,7 +73,7 @@ uartclk: [email protected] {
core-module@10000000 {
/* 24 MHz chrystal on the core module */
- cm24mhz: cm24mhz@24M {
+ cm24mhz: clock-24000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
diff --git a/arch/arm/boot/dts/arm/integratorcp.dts b/arch/arm/boot/dts/arm/integratorcp.dts
index c011333eb165..8ad1a8957ace 100644
--- a/arch/arm/boot/dts/arm/integratorcp.dts
+++ b/arch/arm/boot/dts/arm/integratorcp.dts
@@ -47,14 +47,14 @@ cpu@0 {
*/
/* The codec chrystal operates at 24.576 MHz */
- xtal_codec: [email protected] {
+ xtal_codec: clock-24576000 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24576000>;
};
/* The chrystal is divided by 2 by the codec for the AACI bit clock */
- aaci_bitclk: [email protected] {
+ aaci_bitclk: clock-12288000 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <2>;
@@ -63,21 +63,21 @@ aaci_bitclk: [email protected] {
};
/* This is a 25MHz chrystal on the base board */
- xtal25mhz: xtal25mhz@25M {
+ xtal25mhz: clock-25000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
};
/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
- uartclk: [email protected] {
+ uartclk: clock-14745600 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <14745600>;
};
/* Actually sysclk I think */
- pclk: pclk@0 {
+ pclk: clock-pclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
@@ -85,7 +85,7 @@ pclk: pclk@0 {
core-module@10000000 {
/* 24 MHz chrystal on the core module */
- cm24mhz: cm24mhz@24M {
+ cm24mhz: clock-24000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -131,7 +131,7 @@ kmiclk: kmiclk@1M {
};
/* The timer clock is the 24 MHz oscillator divided to 1MHz */
- timclk: timclk@1M {
+ timclk: clock-1000000 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
diff --git a/arch/arm/boot/dts/arm/mps2.dtsi b/arch/arm/boot/dts/arm/mps2.dtsi
index d930168fbd91..e240bc8aa605 100644
--- a/arch/arm/boot/dts/arm/mps2.dtsi
+++ b/arch/arm/boot/dts/arm/mps2.dtsi
@@ -48,31 +48,31 @@ / {
#address-cells = <1>;
#size-cells = <1>;
- oscclk0: clk-osc0 {
+ oscclk0: clock-50000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
};
- oscclk1: clk-osc1 {
+ oscclk1: clock-24576000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
- oscclk2: clk-osc2 {
+ oscclk2: clock-25000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
- cfgclk: clk-cfg {
+ cfgclk: clock-5000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <5000000>;
};
- spicfgclk: clk-spicfg {
+ spicfgclk: clock-75000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <75000000>;
@@ -86,7 +86,7 @@ sysclk: spiclcd: spicon: i2cclcd: i2caud: clock-sys {
clock-mult = <1>;
};
- audmclk: clk-audm {
+ audmclk: clk-12388000 {
compatible = "fixed-factor-clock";
clocks = <&oscclk1>;
#clock-cells = <0>;
@@ -94,7 +94,7 @@ audmclk: clk-audm {
clock-mult = <1>;
};
- audsclk: clk-auds {
+ audsclk: clk-3072000 {
compatible = "fixed-factor-clock";
clocks = <&oscclk1>;
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/arm/versatile-ab.dts b/arch/arm/boot/dts/arm/versatile-ab.dts
index ff5ca3e9afba..7057813137b6 100644
--- a/arch/arm/boot/dts/arm/versatile-ab.dts
+++ b/arch/arm/boot/dts/arm/versatile-ab.dts
@@ -24,7 +24,7 @@ memory@0 {
reg = <0x0 0x08000000>;
};
- xtal24mhz: xtal24mhz@24M {
+ xtal24mhz: clock-24000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -142,14 +142,14 @@ led@8,7 {
};
/* OSC1 on AB, OSC4 on PB */
- osc1: cm_aux_osc@24M {
+ osc1: clock-osc {
#clock-cells = <0>;
compatible = "arm,versatile-cm-auxosc";
clocks = <&xtal24mhz>;
};
/* The timer clock is the 24 MHz oscillator divided to 1MHz */
- timclk: timclk@1M {
+ timclk: clock-1000000 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
@@ -157,7 +157,7 @@ timclk: timclk@1M {
clocks = <&xtal24mhz>;
};
- pclk: pclk@24M {
+ pclk: clock-24000000 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
diff --git a/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi
index 8af4b77fe655..158b3923eae3 100644
--- a/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi
@@ -20,7 +20,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
- v2m_fixed_3v3: fixed-regulator-0 {
+ v2m_fixed_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
@@ -28,21 +28,21 @@ v2m_fixed_3v3: fixed-regulator-0 {
regulator-always-on;
};
- v2m_clk24mhz: clk24mhz {
+ v2m_clk24mhz: clock-24000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "v2m:clk24mhz";
};
- v2m_refclk1mhz: refclk1mhz {
+ v2m_refclk1mhz: clock-1000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1000000>;
clock-output-names = "v2m:refclk1mhz";
};
- v2m_refclk32khz: refclk32khz {
+ v2m_refclk32khz: clock-32768 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
diff --git a/arch/arm/boot/dts/arm/vexpress-v2m.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
index c5e92f6d2fcd..be03f2a8a57a 100644
--- a/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
@@ -351,7 +351,7 @@ clcd_pads_mb: endpoint {
};
};
- v2m_fixed_3v3: fixed-regulator-0 {
+ v2m_fixed_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
@@ -359,21 +359,21 @@ v2m_fixed_3v3: fixed-regulator-0 {
regulator-always-on;
};
- v2m_clk24mhz: clk24mhz {
+ v2m_clk24mhz: clock-24000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "v2m:clk24mhz";
};
- v2m_refclk1mhz: refclk1mhz {
+ v2m_refclk1mhz: clock-1000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1000000>;
clock-output-names = "v2m:refclk1mhz";
};
- v2m_refclk32khz: refclk32khz {
+ v2m_refclk32khz: clock-32768 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
@@ -436,7 +436,7 @@ mcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- oscclk0 {
+ clock-controller-0 {
/* MCC static memory clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
@@ -445,7 +445,7 @@ oscclk0 {
clock-output-names = "v2m:oscclk0";
};
- v2m_oscclk1: oscclk1 {
+ v2m_oscclk1: clock-controller-1 {
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
@@ -454,7 +454,7 @@ v2m_oscclk1: oscclk1 {
clock-output-names = "v2m:oscclk1";
};
- v2m_oscclk2: oscclk2 {
+ v2m_oscclk2: clock-controller-2 {
/* IO FPGA peripheral clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
@@ -463,7 +463,7 @@ v2m_oscclk2: oscclk2 {
clock-output-names = "v2m:oscclk2";
};
- volt-vio {
+ regulator-vio {
/* Logic level voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts
index 679537e17ff5..5a91e936edef 100644
--- a/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts
@@ -142,7 +142,7 @@ dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- oscclk0 {
+ clock-controller-0 {
/* CPU PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
@@ -151,7 +151,7 @@ oscclk0 {
clock-output-names = "oscclk0";
};
- oscclk4 {
+ clock-controller-4 {
/* Multiplexed AXI master clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
@@ -160,7 +160,7 @@ oscclk4 {
clock-output-names = "oscclk4";
};
- hdlcd_clk: oscclk5 {
+ hdlcd_clk: clock-controller-5 {
/* HDLCD PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 5>;
@@ -169,7 +169,7 @@ hdlcd_clk: oscclk5 {
clock-output-names = "oscclk5";
};
- smbclk: oscclk6 {
+ smbclk: clock-controller-6 {
/* SMB clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 6>;
@@ -178,7 +178,7 @@ smbclk: oscclk6 {
clock-output-names = "oscclk6";
};
- sys_pll: oscclk7 {
+ sys_pll: clock-controller-7 {
/* SYS PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 7>;
@@ -187,7 +187,7 @@ sys_pll: oscclk7 {
clock-output-names = "oscclk7";
};
- oscclk8 {
+ clock-controller-8 {
/* DDR2 PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 8>;
@@ -196,7 +196,7 @@ oscclk8 {
clock-output-names = "oscclk8";
};
- volt-cores {
+ regulator-cores {
/* CPU core voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
index 511e87cc2bc5..6ef23c53d2d8 100644
--- a/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
@@ -253,7 +253,7 @@ dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- oscclk0 {
+ clock-controller-0 {
/* A15 PLL 0 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
@@ -262,7 +262,7 @@ oscclk0 {
clock-output-names = "oscclk0";
};
- oscclk1 {
+ clock-controller-1 {
/* A15 PLL 1 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
@@ -271,7 +271,7 @@ oscclk1 {
clock-output-names = "oscclk1";
};
- oscclk2 {
+ clock-controller-2 {
/* A7 PLL 0 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
@@ -280,7 +280,7 @@ oscclk2 {
clock-output-names = "oscclk2";
};
- oscclk3 {
+ clock-controller-3 {
/* A7 PLL 1 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 3>;
@@ -289,7 +289,7 @@ oscclk3 {
clock-output-names = "oscclk3";
};
- oscclk4 {
+ clock-controller-4 {
/* External AXI master clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
@@ -298,7 +298,7 @@ oscclk4 {
clock-output-names = "oscclk4";
};
- hdlcd_clk: oscclk5 {
+ hdlcd_clk: clock-controller-5 {
/* HDLCD PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 5>;
@@ -307,7 +307,7 @@ hdlcd_clk: oscclk5 {
clock-output-names = "oscclk5";
};
- smbclk: oscclk6 {
+ smbclk: clock-controller-6 {
/* Static memory controller clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 6>;
@@ -316,7 +316,7 @@ smbclk: oscclk6 {
clock-output-names = "oscclk6";
};
- oscclk7 {
+ clock-controller-7 {
/* SYS PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 7>;
@@ -325,7 +325,7 @@ oscclk7 {
clock-output-names = "oscclk7";
};
- oscclk8 {
+ clock-controller-8 {
/* DDR2 PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 8>;
@@ -334,7 +334,7 @@ oscclk8 {
clock-output-names = "oscclk8";
};
- volt-a15 {
+ regulator-a15 {
/* A15 CPU core voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
@@ -345,7 +345,7 @@ volt-a15 {
label = "A15 Vcore";
};
- volt-a7 {
+ regulator-a7 {
/* A7 CPU core voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 1>;
diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts
index ff1f9a1bcfcf..e3896253f33e 100644
--- a/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts
@@ -145,7 +145,7 @@ dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- cpu_clk: oscclk0 {
+ cpu_clk: clock-controller-0 {
/* CPU and internal AXI reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
@@ -154,7 +154,7 @@ cpu_clk: oscclk0 {
clock-output-names = "oscclk0";
};
- axi_clk: oscclk1 {
+ axi_clk: clock-controller-1 {
/* Multiplexed AXI master clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
@@ -163,7 +163,7 @@ axi_clk: oscclk1 {
clock-output-names = "oscclk1";
};
- oscclk2 {
+ clock-controller-2 {
/* DDR2 */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
@@ -172,7 +172,7 @@ oscclk2 {
clock-output-names = "oscclk2";
};
- hdlcd_clk: oscclk3 {
+ hdlcd_clk: clock-controller-3 {
/* HDLCD */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 3>;
@@ -181,7 +181,7 @@ hdlcd_clk: oscclk3 {
clock-output-names = "oscclk3";
};
- oscclk4 {
+ clock-controller-4 {
/* Test chip gate configuration */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
@@ -190,7 +190,7 @@ oscclk4 {
clock-output-names = "oscclk4";
};
- smbclk: oscclk5 {
+ smbclk: clock-controller-5 {
/* SMB clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 5>;
diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
index 8bf35666412b..43a5a4ab6ff0 100644
--- a/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
@@ -187,7 +187,7 @@ dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- oscclk0: extsaxiclk {
+ oscclk0: clock-controller-0 {
/* ACLK clock to the AXI master port on the test chip */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
@@ -196,7 +196,7 @@ oscclk0: extsaxiclk {
clock-output-names = "extsaxiclk";
};
- oscclk1: clcdclk {
+ oscclk1: clock-controller-1 {
/* Reference clock for the CLCD */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
@@ -205,7 +205,7 @@ oscclk1: clcdclk {
clock-output-names = "clcdclk";
};
- smbclk: oscclk2: tcrefclk {
+ smbclk: oscclk2: clock-controller-2 {
/* Reference clock for the test chip internal PLLs */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
@@ -214,7 +214,7 @@ smbclk: oscclk2: tcrefclk {
clock-output-names = "tcrefclk";
};
- volt-vd10 {
+ regulator-vd10 {
/* Test Chip internal logic voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
@@ -223,7 +223,7 @@ volt-vd10 {
label = "VD10";
};
- volt-vd10-s2 {
+ regulator-vd10-s2 {
/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 1>;
@@ -232,7 +232,7 @@ volt-vd10-s2 {
label = "VD10_S2";
};
- volt-vd10-s3 {
+ regulator-vd10-s3 {
/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 2>;
@@ -241,7 +241,7 @@ volt-vd10-s3 {
label = "VD10_S3";
};
- volt-vcc1v8 {
+ regulator-vcc1v8 {
/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 3>;
@@ -250,7 +250,7 @@ volt-vcc1v8 {
label = "VCC1V8";
};
- volt-ddr2vtt {
+ regulator-ddr2vtt {
/* DDR2 SDRAM VTT termination voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 4>;
@@ -259,7 +259,7 @@ volt-ddr2vtt {
label = "DDR2VTT";
};
- volt-vcc3v3 {
+ regulator-vcc3v3 {
/* Local board supply for miscellaneous logic external to the Test Chip */
arm,vexpress-sysreg,func = <2 5>;
compatible = "arm,vexpress-volt";
diff --git a/arch/arm64/boot/dts/arm/corstone1000-fvp.dts b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
index 901a7fc83307..abd013562995 100644
--- a/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
+++ b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
@@ -21,7 +21,7 @@ smsc: ethernet@4010000 {
reg-io-width = <2>;
};
- vmmc_v3_3d: fixed_v3_3d {
+ vmmc_v3_3d: regulator-vmmc {
compatible = "regulator-fixed";
regulator-name = "vmmc_supply";
regulator-min-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/arm/corstone1000.dtsi b/arch/arm64/boot/dts/arm/corstone1000.dtsi
index 6ad7829f9e28..bb9b96fb5314 100644
--- a/arch/arm64/boot/dts/arm/corstone1000.dtsi
+++ b/arch/arm64/boot/dts/arm/corstone1000.dtsi
@@ -60,14 +60,14 @@ L2_0: l2-cache0 {
cache-sets = <1024>;
};
- refclk100mhz: refclk100mhz {
+ refclk100mhz: clock-100000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
clock-output-names = "apb_pclk";
};
- smbclk: refclk24mhzx2 {
+ smbclk: clock-48000000 {
/* Reference 24MHz clock x 2 */
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -83,7 +83,7 @@ timer {
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
};
- uartclk: uartclk {
+ uartclk: clock-50000000 {
/* UART clock - 50MHz */
compatible = "fixed-clock";
#clock-cells = <0>;
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
index 7b41537731a6..93f1e7c026b8 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -99,21 +99,21 @@ watchdog@2a440000 {
timeout-sec = <30>;
};
- v2m_clk24mhz: clk24mhz {
+ v2m_clk24mhz: clock-24000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "v2m:clk24mhz";
};
- v2m_refclk1mhz: refclk1mhz {
+ v2m_refclk1mhz: clock-1000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1000000>;
clock-output-names = "v2m:refclk1mhz";
};
- v2m_refclk32khz: refclk32khz {
+ v2m_refclk32khz: clock-32768 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
index 2870b5eeb198..6d7d88e9591a 100644
--- a/arch/arm64/boot/dts/arm/juno-clocks.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
@@ -8,35 +8,35 @@
*/
/ {
/* SoC fixed clocks */
- soc_uartclk: refclk7372800hz {
+ soc_uartclk: clock-7372800 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <7372800>;
clock-output-names = "juno:uartclk";
};
- soc_usb48mhz: clk48mhz {
+ soc_usb48mhz: clock-48000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <48000000>;
clock-output-names = "clk48mhz";
};
- soc_smc50mhz: clk50mhz {
+ soc_smc50mhz: clock-50000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
clock-output-names = "smc_clk";
};
- soc_refclk100mhz: refclk100mhz {
+ soc_refclk100mhz: clock-100000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
clock-output-names = "apb_pclk";
};
- soc_faxiclk: refclk400mhz {
+ soc_faxiclk: clock-400000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <400000000>;
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index be42932f7e21..b689546ce360 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -8,35 +8,35 @@
*/
/ {
- mb_clk24mhz: clk24mhz {
+ mb_clk24mhz: clock-24000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "juno_mb:clk24mhz";
};
- mb_clk25mhz: clk25mhz {
+ mb_clk25mhz: clock-25000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
clock-output-names = "juno_mb:clk25mhz";
};
- v2m_refclk1mhz: refclk1mhz {
+ v2m_refclk1mhz: clock-1000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1000000>;
clock-output-names = "juno_mb:refclk1mhz";
};
- v2m_refclk32khz: refclk32khz {
+ v2m_refclk32khz: clock-32768 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "juno_mb:refclk32khz";
};
- mb_fixed_3v3: mcc-sb-3v3 {
+ mb_fixed_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "MCC_SB_3V3";
regulator-min-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index ba8beef3fe99..66b1b74d27dc 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -8,28 +8,28 @@
* VEMotherBoard.lisa
*/
/ {
- v2m_clk24mhz: clk24mhz {
+ v2m_clk24mhz: clock-24000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "v2m:clk24mhz";
};
- v2m_refclk1mhz: refclk1mhz {
+ v2m_refclk1mhz: clock-1000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1000000>;
clock-output-names = "v2m:refclk1mhz";
};
- v2m_refclk32khz: refclk32khz {
+ v2m_refclk32khz: clock-32768 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "v2m:refclk32khz";
};
- v2m_fixed_3v3: v2m-3v3 {
+ v2m_fixed_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
@@ -41,7 +41,7 @@ mcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- v2m_oscclk1: oscclk1 {
+ v2m_oscclk1: clock-controller {
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
index 9115c99d0dc0..a0e1fa83eafa 100644
--- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -111,7 +111,7 @@ dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- smbclk: smclk {
+ smbclk: clock-controller {
/* SMC clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
@@ -120,7 +120,7 @@ smbclk: smclk {
clock-output-names = "smclk";
};
- volt-vio {
+ regulator-vio {
/* VIO to expansion board above */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
@@ -130,7 +130,7 @@ volt-vio {
regulator-always-on;
};
- volt-12v {
+ regulator-12v {
/* 12V from power connector J6 */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 1>;
--
2.43.0
On Tue, May 28, 2024 at 9:15 PM Rob Herring (Arm) <[email protected]> wrote:
> There's not much reason to have multiple fixed-factor-clock instances
> which are all the same factor and clock input. Drop the nodes, but keep
> the labels to minimize the changes and keep some distinction of the
> different clocks.
>
> Signed-off-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Yours,
Linus Walleij
On Tue, May 28, 2024 at 9:15 PM Rob Herring (Arm) <[email protected]> wrote:
> With the recent defining of preferred naming for fixed clock and
> regulator nodes, convert the Arm Ltd. boards to use the preferred
> names. In the cases which had a unit-address, warnings about missing
> "reg" property are fixed.
>
> Signed-off-by: Rob Herring (Arm) <[email protected]>
Neat! :)
Reviewed-by: Linus Walleij <[email protected]>
Yours,
Linus Walleij
On Tue, May 28, 2024 at 02:15:32PM -0500, Rob Herring (Arm) wrote:
> With the recent defining of preferred naming for fixed clock and
> regulator nodes, convert the Arm Ltd. boards to use the preferred
> names. In the cases which had a unit-address, warnings about missing
> "reg" property are fixed.
>
Thanks for the cleanup.
Do you want to take it through DT tree or prefer me to take it. I think
I have one another patch from Krzysztof for Juno DTS IIRC.
I am fine either way. In case you take it:
Reviewed-by: Sudeep Holla <[email protected]>
--
Regards,
Sudeep