The GMAC of Loongson chips cannot insert the correct 1.5-2ns delay. So
we need the PHY to insert internal delays for both transmit and receive
data lines from/to the PHY device. Fix this by changing the "phy-mode"
from "rgmii" to "rgmii-id" in dts.
Signed-off-by: Huacai Chen <[email protected]>
---
arch/loongarch/boot/dts/loongson-2k0500-ref.dts | 4 ++--
arch/loongarch/boot/dts/loongson-2k1000-ref.dts | 4 ++--
arch/loongarch/boot/dts/loongson-2k2000-ref.dts | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/loongarch/boot/dts/loongson-2k0500-ref.dts b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
index 8aefb0c12672..a34734a6c3ce 100644
--- a/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
+++ b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
@@ -44,14 +44,14 @@ linux,cma {
&gmac0 {
status = "okay";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
bus_id = <0x0>;
};
&gmac1 {
status = "okay";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
bus_id = <0x1>;
};
diff --git a/arch/loongarch/boot/dts/loongson-2k1000-ref.dts b/arch/loongarch/boot/dts/loongson-2k1000-ref.dts
index 8463fe035386..23cf26cc3e5f 100644
--- a/arch/loongarch/boot/dts/loongson-2k1000-ref.dts
+++ b/arch/loongarch/boot/dts/loongson-2k1000-ref.dts
@@ -43,7 +43,7 @@ linux,cma {
&gmac0 {
status = "okay";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&phy0>;
mdio {
compatible = "snps,dwmac-mdio";
@@ -58,7 +58,7 @@ phy0: ethernet-phy@0 {
&gmac1 {
status = "okay";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&phy1>;
mdio {
compatible = "snps,dwmac-mdio";
diff --git a/arch/loongarch/boot/dts/loongson-2k2000-ref.dts b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
index 74b99bd234cc..ea9e6985d0e9 100644
--- a/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
+++ b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
@@ -92,7 +92,7 @@ phy1: ethernet-phy@1 {
&gmac2 {
status = "okay";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&phy2>;
mdio {
compatible = "snps,dwmac-mdio";
--
2.43.0