dt_binding require I2C's clock name is "ipg". Change it to "ipg" from "i2c"
to fix below DTB_CHECK warning.
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: i2c@2190000: clock-names:0: 'ipg' was expecte
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 8ee6d8c0ef619..a4a476b04ebe3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -533,7 +533,7 @@ i2c0: i2c@2180000 {
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <0 56 0x4>;
- clock-names = "i2c";
+ clock-names = "ipg";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
dmas = <&edma0 1 38>,
@@ -548,7 +548,7 @@ i2c1: i2c@2190000 {
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <0 57 0x4>;
- clock-names = "i2c";
+ clock-names = "ipg";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -561,7 +561,7 @@ i2c2: i2c@21a0000 {
#size-cells = <0>;
reg = <0x0 0x21a0000 0x0 0x10000>;
interrupts = <0 58 0x4>;
- clock-names = "i2c";
+ clock-names = "ipg";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -574,7 +574,7 @@ i2c3: i2c@21b0000 {
#size-cells = <0>;
reg = <0x0 0x21b0000 0x0 0x10000>;
interrupts = <0 59 0x4>;
- clock-names = "i2c";
+ clock-names = "ipg";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
--
2.34.1