From: Francesco Dolcini <[email protected]>
The enable gpio is not required when the SBU mux is used only for
orientation, make enable-gpios required only for alternate mode
switch use case.
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
---
v2:
- add Acked-by: Conor Dooley
---
Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
index 88e1607cf053..30edcce82f97 100644
--- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
+++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
@@ -44,13 +44,18 @@ properties:
required:
- compatible
- - enable-gpios
- select-gpios
- orientation-switch
- port
allOf:
- $ref: usb-switch.yaml#
+ - if:
+ required:
+ - mode-switch
+ then:
+ required:
+ - enable-gpios
additionalProperties: false
--
2.39.2