2024-06-03 14:01:58

by Max Krummenacher

[permalink] [raw]
Subject: [PATCH v1] arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin

From: Max Krummenacher <[email protected]>

SODIMM 17 can be used as an edge triggered interrupt supplied from an
off board source.

Enable hysteresis on the pinmuxing to increase immunity against noise
on the signal.

Fixes: 60f01b5b5c7d ("arm64: dts: imx8mm-verdin: update iomux configuration")
Signed-off-by: Max Krummenacher <[email protected]>

---

arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 4768b05fd765..7a971b235283 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -935,7 +935,7 @@ pinctrl_gpio8: gpio8grp {
/* Verdin GPIO_9_DSI (pulled-up as active-low) */
pinctrl_gpio_9_dsi: gpio9dsigrp {
fsl,pins =
- <MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x146>; /* SODIMM 17 */
+ <MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x1c6>; /* SODIMM 17 */
};

/* Verdin GPIO_10_DSI (pulled-up as active-low) */
--
2.42.0



2024-06-16 12:21:36

by Shawn Guo

[permalink] [raw]
Subject: Re: [PATCH v1] arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin

On Mon, Jun 03, 2024 at 04:00:45PM +0200, [email protected] wrote:
> From: Max Krummenacher <[email protected]>
>
> SODIMM 17 can be used as an edge triggered interrupt supplied from an
> off board source.
>
> Enable hysteresis on the pinmuxing to increase immunity against noise
> on the signal.
>
> Fixes: 60f01b5b5c7d ("arm64: dts: imx8mm-verdin: update iomux configuration")
> Signed-off-by: Max Krummenacher <[email protected]>

Applied, thanks!