We need this UAPI header in tools/include subdirectory for using it from
BPF selftests.
Signed-off-by: Andrii Nakryiko <[email protected]>
---
tools/include/uapi/linux/fs.h | 550 ++++++++++++++++++++++++++++++++++
1 file changed, 550 insertions(+)
create mode 100644 tools/include/uapi/linux/fs.h
diff --git a/tools/include/uapi/linux/fs.h b/tools/include/uapi/linux/fs.h
new file mode 100644
index 000000000000..7306022780d3
--- /dev/null
+++ b/tools/include/uapi/linux/fs.h
@@ -0,0 +1,550 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_FS_H
+#define _UAPI_LINUX_FS_H
+
+/*
+ * This file has definitions for some important file table structures
+ * and constants and structures used by various generic file system
+ * ioctl's. Please do not make any changes in this file before
+ * sending patches for review to [email protected] and
+ * [email protected].
+ */
+
+#include <linux/limits.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#ifndef __KERNEL__
+#include <linux/fscrypt.h>
+#endif
+
+/* Use of MS_* flags within the kernel is restricted to core mount(2) code. */
+#if !defined(__KERNEL__)
+#include <linux/mount.h>
+#endif
+
+/*
+ * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
+ * the file limit at runtime and only root can increase the per-process
+ * nr_file rlimit, so it's safe to set up a ridiculously high absolute
+ * upper limit on files-per-process.
+ *
+ * Some programs (notably those using select()) may have to be
+ * recompiled to take full advantage of the new limits..
+ */
+
+/* Fixed constants first: */
+#undef NR_OPEN
+#define INR_OPEN_CUR 1024 /* Initial setting for nfile rlimits */
+#define INR_OPEN_MAX 4096 /* Hard limit for nfile rlimits */
+
+#define BLOCK_SIZE_BITS 10
+#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
+
+#define SEEK_SET 0 /* seek relative to beginning of file */
+#define SEEK_CUR 1 /* seek relative to current file position */
+#define SEEK_END 2 /* seek relative to end of file */
+#define SEEK_DATA 3 /* seek to the next data */
+#define SEEK_HOLE 4 /* seek to the next hole */
+#define SEEK_MAX SEEK_HOLE
+
+#define RENAME_NOREPLACE (1 << 0) /* Don't overwrite target */
+#define RENAME_EXCHANGE (1 << 1) /* Exchange source and dest */
+#define RENAME_WHITEOUT (1 << 2) /* Whiteout source */
+
+struct file_clone_range {
+ __s64 src_fd;
+ __u64 src_offset;
+ __u64 src_length;
+ __u64 dest_offset;
+};
+
+struct fstrim_range {
+ __u64 start;
+ __u64 len;
+ __u64 minlen;
+};
+
+/*
+ * We include a length field because some filesystems (vfat) have an identifier
+ * that we do want to expose as a UUID, but doesn't have the standard length.
+ *
+ * We use a fixed size buffer beacuse this interface will, by fiat, never
+ * support "UUIDs" longer than 16 bytes; we don't want to force all downstream
+ * users to have to deal with that.
+ */
+struct fsuuid2 {
+ __u8 len;
+ __u8 uuid[16];
+};
+
+struct fs_sysfs_path {
+ __u8 len;
+ __u8 name[128];
+};
+
+/* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */
+#define FILE_DEDUPE_RANGE_SAME 0
+#define FILE_DEDUPE_RANGE_DIFFERS 1
+
+/* from struct btrfs_ioctl_file_extent_same_info */
+struct file_dedupe_range_info {
+ __s64 dest_fd; /* in - destination file */
+ __u64 dest_offset; /* in - start of extent in destination */
+ __u64 bytes_deduped; /* out - total # of bytes we were able
+ * to dedupe from this file. */
+ /* status of this dedupe operation:
+ * < 0 for error
+ * == FILE_DEDUPE_RANGE_SAME if dedupe succeeds
+ * == FILE_DEDUPE_RANGE_DIFFERS if data differs
+ */
+ __s32 status; /* out - see above description */
+ __u32 reserved; /* must be zero */
+};
+
+/* from struct btrfs_ioctl_file_extent_same_args */
+struct file_dedupe_range {
+ __u64 src_offset; /* in - start of extent in source */
+ __u64 src_length; /* in - length of extent */
+ __u16 dest_count; /* in - total elements in info array */
+ __u16 reserved1; /* must be zero */
+ __u32 reserved2; /* must be zero */
+ struct file_dedupe_range_info info[];
+};
+
+/* And dynamically-tunable limits and defaults: */
+struct files_stat_struct {
+ unsigned long nr_files; /* read only */
+ unsigned long nr_free_files; /* read only */
+ unsigned long max_files; /* tunable */
+};
+
+struct inodes_stat_t {
+ long nr_inodes;
+ long nr_unused;
+ long dummy[5]; /* padding for sysctl ABI compatibility */
+};
+
+
+#define NR_FILE 8192 /* this can well be larger on a larger system */
+
+/*
+ * Structure for FS_IOC_FSGETXATTR[A] and FS_IOC_FSSETXATTR.
+ */
+struct fsxattr {
+ __u32 fsx_xflags; /* xflags field value (get/set) */
+ __u32 fsx_extsize; /* extsize field value (get/set)*/
+ __u32 fsx_nextents; /* nextents field value (get) */
+ __u32 fsx_projid; /* project identifier (get/set) */
+ __u32 fsx_cowextsize; /* CoW extsize field value (get/set)*/
+ unsigned char fsx_pad[8];
+};
+
+/*
+ * Flags for the fsx_xflags field
+ */
+#define FS_XFLAG_REALTIME 0x00000001 /* data in realtime volume */
+#define FS_XFLAG_PREALLOC 0x00000002 /* preallocated file extents */
+#define FS_XFLAG_IMMUTABLE 0x00000008 /* file cannot be modified */
+#define FS_XFLAG_APPEND 0x00000010 /* all writes append */
+#define FS_XFLAG_SYNC 0x00000020 /* all writes synchronous */
+#define FS_XFLAG_NOATIME 0x00000040 /* do not update access time */
+#define FS_XFLAG_NODUMP 0x00000080 /* do not include in backups */
+#define FS_XFLAG_RTINHERIT 0x00000100 /* create with rt bit set */
+#define FS_XFLAG_PROJINHERIT 0x00000200 /* create with parents projid */
+#define FS_XFLAG_NOSYMLINKS 0x00000400 /* disallow symlink creation */
+#define FS_XFLAG_EXTSIZE 0x00000800 /* extent size allocator hint */
+#define FS_XFLAG_EXTSZINHERIT 0x00001000 /* inherit inode extent size */
+#define FS_XFLAG_NODEFRAG 0x00002000 /* do not defragment */
+#define FS_XFLAG_FILESTREAM 0x00004000 /* use filestream allocator */
+#define FS_XFLAG_DAX 0x00008000 /* use DAX for IO */
+#define FS_XFLAG_COWEXTSIZE 0x00010000 /* CoW extent size allocator hint */
+#define FS_XFLAG_HASATTR 0x80000000 /* no DIFLAG for this */
+
+/* the read-only stuff doesn't really belong here, but any other place is
+ probably as bad and I don't want to create yet another include file. */
+
+#define BLKROSET _IO(0x12,93) /* set device read-only (0 = read-write) */
+#define BLKROGET _IO(0x12,94) /* get read-only status (0 = read_write) */
+#define BLKRRPART _IO(0x12,95) /* re-read partition table */
+#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */
+#define BLKFLSBUF _IO(0x12,97) /* flush buffer cache */
+#define BLKRASET _IO(0x12,98) /* set read ahead for block device */
+#define BLKRAGET _IO(0x12,99) /* get current read ahead setting */
+#define BLKFRASET _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
+#define BLKFRAGET _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
+#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
+#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
+#define BLKSSZGET _IO(0x12,104)/* get block device sector size */
+#if 0
+#define BLKPG _IO(0x12,105)/* See blkpg.h */
+
+/* Some people are morons. Do not use sizeof! */
+
+#define BLKELVGET _IOR(0x12,106,size_t)/* elevator get */
+#define BLKELVSET _IOW(0x12,107,size_t)/* elevator set */
+/* This was here just to show that the number is taken -
+ probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
+#endif
+/* A jump here: 108-111 have been used for various private purposes. */
+#define BLKBSZGET _IOR(0x12,112,size_t)
+#define BLKBSZSET _IOW(0x12,113,size_t)
+#define BLKGETSIZE64 _IOR(0x12,114,size_t) /* return device size in bytes (u64 *arg) */
+#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
+#define BLKTRACESTART _IO(0x12,116)
+#define BLKTRACESTOP _IO(0x12,117)
+#define BLKTRACETEARDOWN _IO(0x12,118)
+#define BLKDISCARD _IO(0x12,119)
+#define BLKIOMIN _IO(0x12,120)
+#define BLKIOOPT _IO(0x12,121)
+#define BLKALIGNOFF _IO(0x12,122)
+#define BLKPBSZGET _IO(0x12,123)
+#define BLKDISCARDZEROES _IO(0x12,124)
+#define BLKSECDISCARD _IO(0x12,125)
+#define BLKROTATIONAL _IO(0x12,126)
+#define BLKZEROOUT _IO(0x12,127)
+#define BLKGETDISKSEQ _IOR(0x12,128,__u64)
+/*
+ * A jump here: 130-136 are reserved for zoned block devices
+ * (see uapi/linux/blkzoned.h)
+ */
+
+#define BMAP_IOCTL 1 /* obsolete - kept for compatibility */
+#define FIBMAP _IO(0x00,1) /* bmap access */
+#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */
+#define FIFREEZE _IOWR('X', 119, int) /* Freeze */
+#define FITHAW _IOWR('X', 120, int) /* Thaw */
+#define FITRIM _IOWR('X', 121, struct fstrim_range) /* Trim */
+#define FICLONE _IOW(0x94, 9, int)
+#define FICLONERANGE _IOW(0x94, 13, struct file_clone_range)
+#define FIDEDUPERANGE _IOWR(0x94, 54, struct file_dedupe_range)
+
+#define FSLABEL_MAX 256 /* Max chars for the interface; each fs may differ */
+
+#define FS_IOC_GETFLAGS _IOR('f', 1, long)
+#define FS_IOC_SETFLAGS _IOW('f', 2, long)
+#define FS_IOC_GETVERSION _IOR('v', 1, long)
+#define FS_IOC_SETVERSION _IOW('v', 2, long)
+#define FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap)
+#define FS_IOC32_GETFLAGS _IOR('f', 1, int)
+#define FS_IOC32_SETFLAGS _IOW('f', 2, int)
+#define FS_IOC32_GETVERSION _IOR('v', 1, int)
+#define FS_IOC32_SETVERSION _IOW('v', 2, int)
+#define FS_IOC_FSGETXATTR _IOR('X', 31, struct fsxattr)
+#define FS_IOC_FSSETXATTR _IOW('X', 32, struct fsxattr)
+#define FS_IOC_GETFSLABEL _IOR(0x94, 49, char[FSLABEL_MAX])
+#define FS_IOC_SETFSLABEL _IOW(0x94, 50, char[FSLABEL_MAX])
+/* Returns the external filesystem UUID, the same one blkid returns */
+#define FS_IOC_GETFSUUID _IOR(0x15, 0, struct fsuuid2)
+/*
+ * Returns the path component under /sys/fs/ that refers to this filesystem;
+ * also /sys/kernel/debug/ for filesystems with debugfs exports
+ */
+#define FS_IOC_GETFSSYSFSPATH _IOR(0x15, 1, struct fs_sysfs_path)
+
+/*
+ * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
+ *
+ * Note: for historical reasons, these flags were originally used and
+ * defined for use by ext2/ext3, and then other file systems started
+ * using these flags so they wouldn't need to write their own version
+ * of chattr/lsattr (which was shipped as part of e2fsprogs). You
+ * should think twice before trying to use these flags in new
+ * contexts, or trying to assign these flags, since they are used both
+ * as the UAPI and the on-disk encoding for ext2/3/4. Also, we are
+ * almost out of 32-bit flags. :-)
+ *
+ * We have recently hoisted FS_IOC_FSGETXATTR / FS_IOC_FSSETXATTR from
+ * XFS to the generic FS level interface. This uses a structure that
+ * has padding and hence has more room to grow, so it may be more
+ * appropriate for many new use cases.
+ *
+ * Please do not change these flags or interfaces before checking with
+ * [email protected] and [email protected].
+ */
+#define FS_SECRM_FL 0x00000001 /* Secure deletion */
+#define FS_UNRM_FL 0x00000002 /* Undelete */
+#define FS_COMPR_FL 0x00000004 /* Compress file */
+#define FS_SYNC_FL 0x00000008 /* Synchronous updates */
+#define FS_IMMUTABLE_FL 0x00000010 /* Immutable file */
+#define FS_APPEND_FL 0x00000020 /* writes to file may only append */
+#define FS_NODUMP_FL 0x00000040 /* do not dump file */
+#define FS_NOATIME_FL 0x00000080 /* do not update atime */
+/* Reserved for compression usage... */
+#define FS_DIRTY_FL 0x00000100
+#define FS_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */
+#define FS_NOCOMP_FL 0x00000400 /* Don't compress */
+/* End compression flags --- maybe not all used */
+#define FS_ENCRYPT_FL 0x00000800 /* Encrypted file */
+#define FS_BTREE_FL 0x00001000 /* btree format dir */
+#define FS_INDEX_FL 0x00001000 /* hash-indexed directory */
+#define FS_IMAGIC_FL 0x00002000 /* AFS directory */
+#define FS_JOURNAL_DATA_FL 0x00004000 /* Reserved for ext3 */
+#define FS_NOTAIL_FL 0x00008000 /* file tail should not be merged */
+#define FS_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */
+#define FS_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/
+#define FS_HUGE_FILE_FL 0x00040000 /* Reserved for ext4 */
+#define FS_EXTENT_FL 0x00080000 /* Extents */
+#define FS_VERITY_FL 0x00100000 /* Verity protected inode */
+#define FS_EA_INODE_FL 0x00200000 /* Inode used for large EA */
+#define FS_EOFBLOCKS_FL 0x00400000 /* Reserved for ext4 */
+#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
+#define FS_DAX_FL 0x02000000 /* Inode is DAX */
+#define FS_INLINE_DATA_FL 0x10000000 /* Reserved for ext4 */
+#define FS_PROJINHERIT_FL 0x20000000 /* Create with parents projid */
+#define FS_CASEFOLD_FL 0x40000000 /* Folder is case insensitive */
+#define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */
+
+#define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */
+#define FS_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */
+
+
+#define SYNC_FILE_RANGE_WAIT_BEFORE 1
+#define SYNC_FILE_RANGE_WRITE 2
+#define SYNC_FILE_RANGE_WAIT_AFTER 4
+#define SYNC_FILE_RANGE_WRITE_AND_WAIT (SYNC_FILE_RANGE_WRITE | \
+ SYNC_FILE_RANGE_WAIT_BEFORE | \
+ SYNC_FILE_RANGE_WAIT_AFTER)
+
+/*
+ * Flags for preadv2/pwritev2:
+ */
+
+typedef int __bitwise __kernel_rwf_t;
+
+/* high priority request, poll if possible */
+#define RWF_HIPRI ((__force __kernel_rwf_t)0x00000001)
+
+/* per-IO O_DSYNC */
+#define RWF_DSYNC ((__force __kernel_rwf_t)0x00000002)
+
+/* per-IO O_SYNC */
+#define RWF_SYNC ((__force __kernel_rwf_t)0x00000004)
+
+/* per-IO, return -EAGAIN if operation would block */
+#define RWF_NOWAIT ((__force __kernel_rwf_t)0x00000008)
+
+/* per-IO O_APPEND */
+#define RWF_APPEND ((__force __kernel_rwf_t)0x00000010)
+
+/* per-IO negation of O_APPEND */
+#define RWF_NOAPPEND ((__force __kernel_rwf_t)0x00000020)
+
+/* mask of flags supported by the kernel */
+#define RWF_SUPPORTED (RWF_HIPRI | RWF_DSYNC | RWF_SYNC | RWF_NOWAIT |\
+ RWF_APPEND | RWF_NOAPPEND)
+
+#define PROCFS_IOCTL_MAGIC 'f'
+
+/* Pagemap ioctl */
+#define PAGEMAP_SCAN _IOWR(PROCFS_IOCTL_MAGIC, 16, struct pm_scan_arg)
+
+/* Bitmasks provided in pm_scan_args masks and reported in page_region.categories. */
+#define PAGE_IS_WPALLOWED (1 << 0)
+#define PAGE_IS_WRITTEN (1 << 1)
+#define PAGE_IS_FILE (1 << 2)
+#define PAGE_IS_PRESENT (1 << 3)
+#define PAGE_IS_SWAPPED (1 << 4)
+#define PAGE_IS_PFNZERO (1 << 5)
+#define PAGE_IS_HUGE (1 << 6)
+#define PAGE_IS_SOFT_DIRTY (1 << 7)
+
+/*
+ * struct page_region - Page region with flags
+ * @start: Start of the region
+ * @end: End of the region (exclusive)
+ * @categories: PAGE_IS_* category bitmask for the region
+ */
+struct page_region {
+ __u64 start;
+ __u64 end;
+ __u64 categories;
+};
+
+/* Flags for PAGEMAP_SCAN ioctl */
+#define PM_SCAN_WP_MATCHING (1 << 0) /* Write protect the pages matched. */
+#define PM_SCAN_CHECK_WPASYNC (1 << 1) /* Abort the scan when a non-WP-enabled page is found. */
+
+/*
+ * struct pm_scan_arg - Pagemap ioctl argument
+ * @size: Size of the structure
+ * @flags: Flags for the IOCTL
+ * @start: Starting address of the region
+ * @end: Ending address of the region
+ * @walk_end Address where the scan stopped (written by kernel).
+ * walk_end == end (address tags cleared) informs that the scan completed on entire range.
+ * @vec: Address of page_region struct array for output
+ * @vec_len: Length of the page_region struct array
+ * @max_pages: Optional limit for number of returned pages (0 = disabled)
+ * @category_inverted: PAGE_IS_* categories which values match if 0 instead of 1
+ * @category_mask: Skip pages for which any category doesn't match
+ * @category_anyof_mask: Skip pages for which no category matches
+ * @return_mask: PAGE_IS_* categories that are to be reported in `page_region`s returned
+ */
+struct pm_scan_arg {
+ __u64 size;
+ __u64 flags;
+ __u64 start;
+ __u64 end;
+ __u64 walk_end;
+ __u64 vec;
+ __u64 vec_len;
+ __u64 max_pages;
+ __u64 category_inverted;
+ __u64 category_mask;
+ __u64 category_anyof_mask;
+ __u64 return_mask;
+};
+
+/* /proc/<pid>/maps ioctl */
+#define PROCMAP_QUERY _IOWR(PROCFS_IOCTL_MAGIC, 17, struct procmap_query)
+
+enum procmap_query_flags {
+ /*
+ * VMA permission flags.
+ *
+ * Can be used as part of procmap_query.query_flags field to look up
+ * only VMAs satisfying specified subset of permissions. E.g., specifying
+ * PROCMAP_QUERY_VMA_READABLE only will return both readable and read/write VMAs,
+ * while having PROCMAP_QUERY_VMA_READABLE | PROCMAP_QUERY_VMA_WRITABLE will only
+ * return read/write VMAs, though both executable/non-executable and
+ * private/shared will be ignored.
+ *
+ * PROCMAP_QUERY_VMA_* flags are also returned in procmap_query.vma_flags
+ * field to specify actual VMA permissions.
+ */
+ PROCMAP_QUERY_VMA_READABLE = 0x01,
+ PROCMAP_QUERY_VMA_WRITABLE = 0x02,
+ PROCMAP_QUERY_VMA_EXECUTABLE = 0x04,
+ PROCMAP_QUERY_VMA_SHARED = 0x08,
+ /*
+ * Query modifier flags.
+ *
+ * By default VMA that covers provided address is returned, or -ENOENT
+ * is returned. With PROCMAP_QUERY_COVERING_OR_NEXT_VMA flag set, closest
+ * VMA with vma_start > addr will be returned if no covering VMA is
+ * found.
+ *
+ * PROCMAP_QUERY_FILE_BACKED_VMA instructs query to consider only VMAs that
+ * have file backing. Can be combined with PROCMAP_QUERY_COVERING_OR_NEXT_VMA
+ * to iterate all VMAs with file backing.
+ */
+ PROCMAP_QUERY_COVERING_OR_NEXT_VMA = 0x10,
+ PROCMAP_QUERY_FILE_BACKED_VMA = 0x20,
+};
+
+/*
+ * Input/output argument structured passed into ioctl() call. It can be used
+ * to query a set of VMAs (Virtual Memory Areas) of a process.
+ *
+ * Each field can be one of three kinds, marked in a short comment to the
+ * right of the field:
+ * - "in", input argument, user has to provide this value, kernel doesn't modify it;
+ * - "out", output argument, kernel sets this field with VMA data;
+ * - "in/out", input and output argument; user provides initial value (used
+ * to specify maximum allowable buffer size), and kernel sets it to actual
+ * amount of data written (or zero, if there is no data).
+ *
+ * If matching VMA is found (according to criterias specified by
+ * query_addr/query_flags, all the out fields are filled out, and ioctl()
+ * returns 0. If there is no matching VMA, -ENOENT will be returned.
+ * In case of any other error, negative error code other than -ENOENT is
+ * returned.
+ *
+ * Most of the data is similar to the one returned as text in /proc/<pid>/maps
+ * file, but procmap_query provides more querying flexibility. There are no
+ * consistency guarantees between subsequent ioctl() calls, but data returned
+ * for matched VMA is self-consistent.
+ */
+struct procmap_query {
+ /* Query struct size, for backwards/forward compatibility */
+ __u64 size;
+ /*
+ * Query flags, a combination of enum procmap_query_flags values.
+ * Defines query filtering and behavior, see enum procmap_query_flags.
+ *
+ * Input argument, provided by user. Kernel doesn't modify it.
+ */
+ __u64 query_flags; /* in */
+ /*
+ * Query address. By default, VMA that covers this address will
+ * be looked up. PROCMAP_QUERY_* flags above modify this default
+ * behavior further.
+ *
+ * Input argument, provided by user. Kernel doesn't modify it.
+ */
+ __u64 query_addr; /* in */
+ /* VMA starting (inclusive) and ending (exclusive) address, if VMA is found. */
+ __u64 vma_start; /* out */
+ __u64 vma_end; /* out */
+ /* VMA permissions flags. A combination of PROCMAP_QUERY_VMA_* flags. */
+ __u64 vma_flags; /* out */
+ /*
+ * VMA file offset. If VMA has file backing, this specifies offset
+ * within the file that VMA's start address corresponds to.
+ * Is set to zero if VMA has no backing file.
+ */
+ __u64 vma_offset; /* out */
+ /* Backing file's inode number, or zero, if VMA has no backing file. */
+ __u64 inode; /* out */
+ /* Backing file's device major/minor number, or zero, if VMA has no backing file. */
+ __u32 dev_major; /* out */
+ __u32 dev_minor; /* out */
+ /*
+ * If set to non-zero value, signals the request to return VMA name
+ * (i.e., VMA's backing file's absolute path, with " (deleted)" suffix
+ * appended, if file was unlinked from FS) for matched VMA. VMA name
+ * can also be some special name (e.g., "[heap]", "[stack]") or could
+ * be even user-supplied with prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME).
+ *
+ * Kernel will set this field to zero, if VMA has no associated name.
+ * Otherwise kernel will return actual amount of bytes filled in
+ * user-supplied buffer (see vma_name_addr field below), including the
+ * terminating zero.
+ *
+ * If VMA name is longer that user-supplied maximum buffer size,
+ * -E2BIG error is returned.
+ *
+ * If this field is set to non-zero value, vma_name_addr should point
+ * to valid user space memory buffer of at least vma_name_size bytes.
+ * If set to zero, vma_name_addr should be set to zero as well
+ */
+ __u32 vma_name_size; /* in/out */
+ /*
+ * If set to non-zero value, signals the request to extract and return
+ * VMA's backing file's build ID, if the backing file is an ELF file
+ * and it contains embedded build ID.
+ *
+ * Kernel will set this field to zero, if VMA has no backing file,
+ * backing file is not an ELF file, or ELF file has no build ID
+ * embedded.
+ *
+ * Build ID is a binary value (not a string). Kernel will set
+ * build_id_size field to exact number of bytes used for build ID.
+ * If build ID is requested and present, but needs more bytes than
+ * user-supplied maximum buffer size (see build_id_addr field below),
+ * -E2BIG error will be returned.
+ *
+ * If this field is set to non-zero value, build_id_addr should point
+ * to valid user space memory buffer of at least build_id_size bytes.
+ * If set to zero, build_id_addr should be set to zero as well
+ */
+ __u32 build_id_size; /* in/out */
+ /*
+ * User-supplied address of a buffer of at least vma_name_size bytes
+ * for kernel to fill with matched VMA's name (see vma_name_size field
+ * description above for details).
+ *
+ * Should be set to zero if VMA name should not be returned.
+ */
+ __u64 vma_name_addr; /* in */
+ /*
+ * User-supplied address of a buffer of at least build_id_size bytes
+ * for kernel to fill with matched VMA's ELF build ID, if available
+ * (see build_id_size field description above for details).
+ *
+ * Should be set to zero if build ID should not be returned.
+ */
+ __u64 build_id_addr; /* in */
+};
+
+#endif /* _UAPI_LINUX_FS_H */
--
2.43.0