From: Nilay Shroff <[email protected]>
[ Upstream commit d3a043733f25d743f3aa617c7f82dbcb5ee2211a ]
In current native multipath design when a shared namespace is created,
we loop through each possible numa-node, calculate the NUMA distance of
that node from each nvme controller and then cache the optimal IO path
for future reference while sending IO. The issue with this design is that
we may refer to the NUMA distance table for an offline node which may not
be populated at the time and so we may inadvertently end up finding and
caching a non-optimal path for IO. Then latter when the corresponding
numa-node becomes online and hence the NUMA distance table entry for that
node is created, ideally we should re-calculate the multipath node distance
for the newly added node however that doesn't happen unless we rescan/reset
the controller. So essentially, we may keep using non-optimal IO path for a
node which is made online after namespace is created.
This patch helps fix this issue ensuring that when a shared namespace is
created, we calculate the multipath node distance for each online numa-node
instead of each possible numa-node. Then latter when a node becomes online
and we receive any IO on that newly added node, we would calculate the
multipath node distance for newly added node but this time NUMA distance
table would have been already populated for newly added node. Hence we
would be able to correctly calculate the multipath node distance and choose
the optimal path for the IO.
Signed-off-by: Nilay Shroff <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/multipath.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 0a88d7bdc5e37..6a444ce273366 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -592,7 +592,7 @@ static void nvme_mpath_set_live(struct nvme_ns *ns)
int node, srcu_idx;
srcu_idx = srcu_read_lock(&head->srcu);
- for_each_node(node)
+ for_each_online_node(node)
__nvme_find_path(head, node);
srcu_read_unlock(&head->srcu, srcu_idx);
}
--
2.43.0
From: Matt Jan <[email protected]>
[ Upstream commit 06e785aeb9ea8a43d0a3967c1ba6e69d758e82d4 ]
The implicit conversion from unsigned int to enum
proc_cn_event is invalid, so explicitly cast it
for compilation in a C++ compiler.
/usr/include/linux/cn_proc.h: In function 'proc_cn_event valid_event(proc_cn_event)':
/usr/include/linux/cn_proc.h:72:17: error: invalid conversion from 'unsigned int' to 'proc_cn_event' [-fpermissive]
72 | ev_type &= PROC_EVENT_ALL;
| ^
| |
| unsigned int
Signed-off-by: Matt Jan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/uapi/linux/cn_proc.h | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/include/uapi/linux/cn_proc.h b/include/uapi/linux/cn_proc.h
index f2afb7cc4926c..18e3745b86cd4 100644
--- a/include/uapi/linux/cn_proc.h
+++ b/include/uapi/linux/cn_proc.h
@@ -69,8 +69,7 @@ struct proc_input {
static inline enum proc_cn_event valid_event(enum proc_cn_event ev_type)
{
- ev_type &= PROC_EVENT_ALL;
- return ev_type;
+ return (enum proc_cn_event)(ev_type & PROC_EVENT_ALL);
}
/*
--
2.43.0
From: Jim Wylder <[email protected]>
[ Upstream commit 611b7eb19d0a305d4de00280e4a71a1b15c507fc ]
Currently, when an adapter defines a max_write_len quirk,
the data will be chunked into data sizes equal to the
max_write_len quirk value. But the payload will be increased by
the size of the register address before transmission. The
resulting value always ends up larger than the limit set
by the quirk.
Avoid this error by setting regmap's max_write to the quirk's
max_write_len minus the number of bytes for the register and
padding. This allows the chunking to work correctly for this
limited case without impacting other use-cases.
Signed-off-by: Jim Wylder <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/regmap/regmap-i2c.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/base/regmap/regmap-i2c.c b/drivers/base/regmap/regmap-i2c.c
index 3ec611dc0c09f..a905e955bbfc7 100644
--- a/drivers/base/regmap/regmap-i2c.c
+++ b/drivers/base/regmap/regmap-i2c.c
@@ -350,7 +350,8 @@ static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c,
if (quirks->max_write_len &&
(bus->max_raw_write == 0 || bus->max_raw_write > quirks->max_write_len))
- max_write = quirks->max_write_len;
+ max_write = quirks->max_write_len -
+ (config->reg_bits + config->pad_bits) / BITS_PER_BYTE;
if (max_read || max_write) {
ret_bus = kmemdup(bus, sizeof(*bus), GFP_KERNEL);
--
2.43.0
From: Sagi Grimberg <[email protected]>
[ Upstream commit c758b77d4a0a0ed3a1292b3fd7a2aeccd1a169a4 ]
In nvmet_sq_destroy we capture sq->ctrl early and if it is non-NULL we
know that a ctrl was allocated (in the admin connect request handler)
and we need to release pending AERs, clear ctrl->sqs and sq->ctrl
(for nvme-loop primarily), and drop the final reference on the ctrl.
However, a small window is possible where nvmet_sq_destroy starts (as
a result of the client giving up and disconnecting) concurrently with
the nvme admin connect cmd (which may be in an early stage). But *before*
kill_and_confirm of sq->ref (i.e. the admin connect managed to get an sq
live reference). In this case, sq->ctrl was allocated however after it was
captured in a local variable in nvmet_sq_destroy.
This prevented the final reference drop on the ctrl.
Solve this by re-capturing the sq->ctrl after all inflight request has
completed, where for sure sq->ctrl reference is final, and move forward
based on that.
This issue was observed in an environment with many hosts connecting
multiple ctrls simoutanuosly, creating a delay in allocating a ctrl
leading up to this race window.
Reported-by: Alex Turin <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/target/core.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index 3935165048e74..8af930e05d96c 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -803,6 +803,15 @@ void nvmet_sq_destroy(struct nvmet_sq *sq)
percpu_ref_exit(&sq->ref);
nvmet_auth_sq_free(sq);
+ /*
+ * we must reference the ctrl again after waiting for inflight IO
+ * to complete. Because admin connect may have sneaked in after we
+ * store sq->ctrl locally, but before we killed the percpu_ref. the
+ * admin connect allocates and assigns sq->ctrl, which now needs a
+ * final ref put, as this ctrl is going away.
+ */
+ ctrl = sq->ctrl;
+
if (ctrl) {
/*
* The teardown flow may take some time, and the host may not
--
2.43.0
From: Masahiro Yamada <[email protected]>
[ Upstream commit 3430f65d6130ccbc86f0ff45642eeb9e2032a600 ]
In convention, short logs print the output file, not the input file.
Let's change the suffix for 'AS' since it assembles *.S into *.o.
[Before]
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.S
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.S
LD vmlinux
[After]
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.o
LD vmlinux
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/link-vmlinux.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 7862a81017477..a9434a72cac4f 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -182,7 +182,7 @@ kallsyms_step()
mksysmap ${kallsyms_vmlinux} ${kallsyms_vmlinux}.syms ${kallsymso_prev}
kallsyms ${kallsyms_vmlinux}.syms ${kallsyms_S}
- info AS ${kallsyms_S}
+ info AS ${kallsymso}
${CC} ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS} \
${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} \
-c -o ${kallsymso} ${kallsyms_S}
--
2.43.0
From: Edward Adam Davis <[email protected]>
[ Upstream commit 068648aab72c9ba7b0597354ef4d81ffaac7b979 ]
write$nci(r0, &(0x7f0000000740)=ANY=[@ANYBLOB="610501"], 0xf)
Syzbot constructed a write() call with a data length of 3 bytes but a count value
of 15, which passed too little data to meet the basic requirements of the function
nci_rf_intf_activated_ntf_packet().
Therefore, increasing the comparison between data length and count value to avoid
problems caused by inconsistent data length and count.
Reported-and-tested-by: [email protected]
Signed-off-by: Edward Adam Davis <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nfc/virtual_ncidev.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/nfc/virtual_ncidev.c b/drivers/nfc/virtual_ncidev.c
index 590b038e449e5..6b89d596ba9af 100644
--- a/drivers/nfc/virtual_ncidev.c
+++ b/drivers/nfc/virtual_ncidev.c
@@ -125,6 +125,10 @@ static ssize_t virtual_ncidev_write(struct file *file,
kfree_skb(skb);
return -EFAULT;
}
+ if (strnlen(skb->data, count) != count) {
+ kfree_skb(skb);
+ return -EINVAL;
+ }
nci_recv_frame(vdev->ndev, skb);
return count;
--
2.43.0
From: Jesse Zhang <[email protected]>
[ Upstream commit a0cf36546cc24ae1c95d72253c7795d4d2fc77aa ]
The pointer parent may be NULLed by the function amdgpu_vm_pt_parent.
To make the code more robust, check the pointer parent.
Signed-off-by: Jesse Zhang <[email protected]>
Suggested-by: Christian König <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c
index 0d51222f6f8eb..026a3db947298 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c
@@ -766,11 +766,15 @@ int amdgpu_vm_pde_update(struct amdgpu_vm_update_params *params,
struct amdgpu_vm_bo_base *entry)
{
struct amdgpu_vm_bo_base *parent = amdgpu_vm_pt_parent(entry);
- struct amdgpu_bo *bo = parent->bo, *pbo;
+ struct amdgpu_bo *bo, *pbo;
struct amdgpu_vm *vm = params->vm;
uint64_t pde, pt, flags;
unsigned int level;
+ if (WARN_ON(!parent))
+ return -EINVAL;
+
+ bo = parent->bo;
for (level = 0, pbo = bo->parent; pbo; ++level)
pbo = pbo->parent;
--
2.43.0
From: Damien Le Moal <[email protected]>
[ Upstream commit b164316808ec5de391c3e7b0148ec937d32d280d ]
A zoned device with a smaller last zone together with a zone capacity
smaller than the zone size does make any sense as that does not
correspond to any possible setup for a real device:
1) For ZNS and zoned UFS devices, all zones are always the same size.
2) For SMR HDDs, all zones always have the same capacity.
In other words, if we have a smaller last runt zone, then this zone
capacity should always be equal to the zone size.
Add a check in null_init_zoned_dev() to prevent a configuration to have
both a smaller zone size and a zone capacity smaller than the zone size.
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/null_blk/zoned.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/block/null_blk/zoned.c b/drivers/block/null_blk/zoned.c
index 55c5b48bc276f..9f6d7316b99aa 100644
--- a/drivers/block/null_blk/zoned.c
+++ b/drivers/block/null_blk/zoned.c
@@ -83,6 +83,17 @@ int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q)
return -EINVAL;
}
+ /*
+ * If a smaller zone capacity was requested, do not allow a smaller last
+ * zone at the same time as such zone configuration does not correspond
+ * to any real zoned device.
+ */
+ if (dev->zone_capacity != dev->zone_size &&
+ dev->size & (dev->zone_size - 1)) {
+ pr_err("A smaller last zone is not allowed with zone capacity smaller than zone size.\n");
+ return -EINVAL;
+ }
+
zone_capacity_sects = mb_to_sects(dev->zone_capacity);
dev_capacity_sects = mb_to_sects(dev->size);
dev->zone_size_sects = mb_to_sects(dev->zone_size);
--
2.43.0
From: Kundan Kumar <[email protected]>
[ Upstream commit 1bd293fcf3af84674e82ed022c049491f3768840 ]
bio_vec start offset may be relatively large particularly when large
folio gets added to the bio. A bigger offset will result in avoiding the
single-segment mapping optimization and end up using expensive
mempool_alloc further.
Rather than using absolute value, adjust bv_offset by
NVME_CTRL_PAGE_SIZE while checking if segment can be fitted into one/two
PRP entries.
Suggested-by: Christoph Hellwig <[email protected]>
Signed-off-by: Kundan Kumar <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/pci.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index e47172bd84efe..8eac383e18f3a 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -778,7 +778,8 @@ static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req,
struct bio_vec bv = req_bvec(req);
if (!is_pci_p2pdma_page(bv.bv_page)) {
- if (bv.bv_offset + bv.bv_len <= NVME_CTRL_PAGE_SIZE * 2)
+ if ((bv.bv_offset & (NVME_CTRL_PAGE_SIZE - 1)) +
+ bv.bv_len <= NVME_CTRL_PAGE_SIZE * 2)
return nvme_setup_prp_simple(dev, req,
&cmnd->rw, &bv);
--
2.43.0
From: Marc Dionne <[email protected]>
[ Upstream commit 29be9100aca2915fab54b5693309bc42956542e5 ]
Don't cross a mountpoint that explicitly specifies a backup volume
(target is <vol>.backup) when starting from a backup volume.
It it not uncommon to mount a volume's backup directly in the volume
itself. This can cause tools that are not paying attention to get
into a loop mounting the volume onto itself as they attempt to
traverse the tree, leading to a variety of problems.
This doesn't prevent the general case of loops in a sequence of
mountpoints, but addresses a common special case in the same way
as other afs clients.
Reported-by: Jan Henrik Sylvester <[email protected]>
Link: http://lists.infradead.org/pipermail/linux-afs/2024-May/008454.html
Reported-by: Markus Suvanto <[email protected]>
Link: http://lists.infradead.org/pipermail/linux-afs/2024-February/008074.html
Signed-off-by: Marc Dionne <[email protected]>
Signed-off-by: David Howells <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jeffrey Altman <[email protected]>
cc: [email protected]
Signed-off-by: Christian Brauner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/afs/mntpt.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c
index 97f50e9fd9eb0..297487ee83231 100644
--- a/fs/afs/mntpt.c
+++ b/fs/afs/mntpt.c
@@ -140,6 +140,11 @@ static int afs_mntpt_set_params(struct fs_context *fc, struct dentry *mntpt)
put_page(page);
if (ret < 0)
return ret;
+
+ /* Don't cross a backup volume mountpoint from a backup volume */
+ if (src_as->volume && src_as->volume->type == AFSVL_BACKVOL &&
+ ctx->type == AFSVL_BACKVOL)
+ return -ENODEV;
}
return 0;
--
2.43.0
From: Hans de Goede <[email protected]>
[ Upstream commit 0b178b02673998f5acca5a0365a8858ca45beedb ]
On x86/ACPI platforms touchscreens mostly just work without needing any
device/model specific configuration. But in some cases (mostly with Silead
and Goodix touchscreens) it is still necessary to manually specify various
touchscreen-properties on a per model basis.
touchscreen_dmi is a special place for DMI quirks for this, but it can be
challenging for users to figure out the right property values, especially
for Silead touchscreens where non of these can be read back from
the touchscreen-controller.
ATM users can only test touchscreen properties by editing touchscreen_dmi.c
and then building a completely new kernel which makes it unnecessary
difficult for users to test and submit properties when necessary for their
laptop / tablet model.
Add support for specifying properties on the kernel commandline to allow
users to easily figure out the right settings. See the added documentation
in kernel-parameters.txt for the commandline syntax.
Cc: Gregor Riepl <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
.../admin-guide/kernel-parameters.txt | 22 ++++++
drivers/platform/x86/touchscreen_dmi.c | 79 ++++++++++++++++++-
2 files changed, 98 insertions(+), 3 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 66dfc348043d6..0aeb00732820a 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1866,6 +1866,28 @@
Format:
<bus_id>,<clkrate>
+ i2c_touchscreen_props= [HW,ACPI,X86]
+ Set device-properties for ACPI-enumerated I2C-attached
+ touchscreen, to e.g. fix coordinates of upside-down
+ mounted touchscreens. If you need this option please
+ submit a drivers/platform/x86/touchscreen_dmi.c patch
+ adding a DMI quirk for this.
+
+ Format:
+ <ACPI_HW_ID>:<prop_name>=<val>[:prop_name=val][:...]
+ Where <val> is one of:
+ Omit "=<val>" entirely Set a boolean device-property
+ Unsigned number Set a u32 device-property
+ Anything else Set a string device-property
+
+ Examples (split over multiple lines):
+ i2c_touchscreen_props=GDIX1001:touchscreen-inverted-x:
+ touchscreen-inverted-y
+
+ i2c_touchscreen_props=MSSL1680:touchscreen-size-x=1920:
+ touchscreen-size-y=1080:touchscreen-inverted-y:
+ firmware-name=gsl1680-vendor-model.fw:silead,home-button
+
i8042.debug [HW] Toggle i8042 debug mode
i8042.unmask_kbd_data
[HW] Enable printing of interrupt data from the KBD port
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index 630ed0515b1e9..dc244e17754e6 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -9,10 +9,13 @@
*/
#include <linux/acpi.h>
+#include <linux/ctype.h>
#include <linux/device.h>
#include <linux/dmi.h>
#include <linux/efi_embedded_fw.h>
#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kstrtox.h>
#include <linux/notifier.h>
#include <linux/property.h>
#include <linux/string.h>
@@ -1822,7 +1825,7 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
{ }
};
-static const struct ts_dmi_data *ts_data;
+static struct ts_dmi_data *ts_data;
static void ts_dmi_add_props(struct i2c_client *client)
{
@@ -1857,6 +1860,64 @@ static int ts_dmi_notifier_call(struct notifier_block *nb,
return 0;
}
+#define MAX_CMDLINE_PROPS 16
+
+static struct property_entry ts_cmdline_props[MAX_CMDLINE_PROPS + 1];
+
+static struct ts_dmi_data ts_cmdline_data = {
+ .properties = ts_cmdline_props,
+};
+
+static int __init ts_parse_props(char *str)
+{
+ /* Save the original str to show it on syntax errors */
+ char orig_str[256];
+ char *name, *value;
+ u32 u32val;
+ int i, ret;
+
+ strscpy(orig_str, str, sizeof(orig_str));
+
+ /*
+ * str is part of the static_command_line from init/main.c and poking
+ * holes in that by writing 0 to it is allowed, as is taking long
+ * lasting references to it.
+ */
+ ts_cmdline_data.acpi_name = strsep(&str, ":");
+
+ for (i = 0; i < MAX_CMDLINE_PROPS; i++) {
+ name = strsep(&str, ":");
+ if (!name || !name[0])
+ break;
+
+ /* Replace '=' with 0 and make value point past '=' or NULL */
+ value = name;
+ strsep(&value, "=");
+ if (!value) {
+ ts_cmdline_props[i] = PROPERTY_ENTRY_BOOL(name);
+ } else if (isdigit(value[0])) {
+ ret = kstrtou32(value, 0, &u32val);
+ if (ret)
+ goto syntax_error;
+
+ ts_cmdline_props[i] = PROPERTY_ENTRY_U32(name, u32val);
+ } else {
+ ts_cmdline_props[i] = PROPERTY_ENTRY_STRING(name, value);
+ }
+ }
+
+ if (!i || str)
+ goto syntax_error;
+
+ ts_data = &ts_cmdline_data;
+ return 1;
+
+syntax_error:
+ pr_err("Invalid '%s' value for 'i2c_touchscreen_props='\n", orig_str);
+ return 1; /* "i2c_touchscreen_props=" is still a known parameter */
+}
+__setup("i2c_touchscreen_props=", ts_parse_props);
+
static struct notifier_block ts_dmi_notifier = {
.notifier_call = ts_dmi_notifier_call,
};
@@ -1864,13 +1925,25 @@ static struct notifier_block ts_dmi_notifier = {
static int __init ts_dmi_init(void)
{
const struct dmi_system_id *dmi_id;
+ struct ts_dmi_data *ts_data_dmi;
int error;
dmi_id = dmi_first_match(touchscreen_dmi_table);
- if (!dmi_id)
+ ts_data_dmi = dmi_id ? dmi_id->driver_data : NULL;
+
+ if (ts_data) {
+ /*
+ * Kernel cmdline provided data takes precedence, copy over
+ * DMI efi_embedded_fw info if available.
+ */
+ if (ts_data_dmi)
+ ts_data->embedded_fw = ts_data_dmi->embedded_fw;
+ } else if (ts_data_dmi) {
+ ts_data = ts_data_dmi;
+ } else {
return 0; /* Not an error */
+ }
- ts_data = dmi_id->driver_data;
/* Some dmi table entries only provide an efi_embedded_fw_desc */
if (!ts_data->properties)
return 0;
--
2.43.0
From: Takashi Iwai <[email protected]>
[ Upstream commit bc42ca002d5d211f9c57334b9b4c25ddb0b4ec35 ]
When an inquiry of the current protocol via UMP Stream Configuration
message fails by some reason, we may leave the current protocol
undefined, which may lead to unexpected behavior. Better to assume a
valid protocol found in the protocol capability bits instead.
For a device that doesn't support the UMP v1.2 feature, it won't reach
to this code path, and USB MIDI GTB descriptor would be used for
determining the protocol, instead.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/ump.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/sound/core/ump.c b/sound/core/ump.c
index fe7911498cc43..284d7b73fefd2 100644
--- a/sound/core/ump.c
+++ b/sound/core/ump.c
@@ -960,6 +960,14 @@ int snd_ump_parse_endpoint(struct snd_ump_endpoint *ump)
if (err < 0)
ump_dbg(ump, "Unable to get UMP EP stream config\n");
+ /* If no protocol is set by some reason, assume the valid one */
+ if (!(ump->info.protocol & SNDRV_UMP_EP_INFO_PROTO_MIDI_MASK)) {
+ if (ump->info.protocol_caps & SNDRV_UMP_EP_INFO_PROTO_MIDI2)
+ ump->info.protocol |= SNDRV_UMP_EP_INFO_PROTO_MIDI2;
+ else if (ump->info.protocol_caps & SNDRV_UMP_EP_INFO_PROTO_MIDI1)
+ ump->info.protocol |= SNDRV_UMP_EP_INFO_PROTO_MIDI1;
+ }
+
/* Query and create blocks from Function Blocks */
for (blk = 0; blk < ump->info.num_blocks; blk++) {
err = create_block_from_fb_info(ump, blk);
--
2.43.0
From: Alex Deucher <[email protected]>
[ Upstream commit dd2b75fd9a79bf418e088656822af06fc253dbe3 ]
This reverts commit 28ebbb4981cb1fad12e0b1227dbecc88810b1ee8.
Revert this commit as apparently the LLVM code to take advantage of
this never landed.
Reviewed-by: Feifei Xu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: Feifei Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdkfd/kfd_device.c | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device.c b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
index 913c70a0ef44f..0c94bdfadaabf 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
@@ -402,15 +402,8 @@ struct kfd_dev *kgd2kfd_probe(struct amdgpu_device *adev, bool vf)
f2g = &gfx_v11_kfd2kgd;
break;
case IP_VERSION(11, 0, 3):
- if ((adev->pdev->device == 0x7460 &&
- adev->pdev->revision == 0x00) ||
- (adev->pdev->device == 0x7461 &&
- adev->pdev->revision == 0x00))
- /* Note: Compiler version is 11.0.5 while HW version is 11.0.3 */
- gfx_target_version = 110005;
- else
- /* Note: Compiler version is 11.0.1 while HW version is 11.0.3 */
- gfx_target_version = 110001;
+ /* Note: Compiler version is 11.0.1 while HW version is 11.0.3 */
+ gfx_target_version = 110001;
f2g = &gfx_v11_kfd2kgd;
break;
default:
--
2.43.0
From: hmtheboy154 <[email protected]>
[ Upstream commit 3050052613790e75b5e4a8536930426b0a8b0774 ]
The "EZpad 6s Pro" uses the same touchscreen as the "EZpad 6 Pro B",
unlike the "Ezpad 6 Pro" which has its own touchscreen.
Signed-off-by: hmtheboy154 <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/touchscreen_dmi.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index 86e8d78ae7c1b..ce00fa6427b3e 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -1409,6 +1409,17 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
DMI_MATCH(DMI_BIOS_DATE, "04/24/2018"),
},
},
+ {
+ /* Jumper EZpad 6s Pro */
+ .driver_data = (void *)&jumper_ezpad_6_pro_b_data,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Jumper"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Ezpad"),
+ /* Above matches are too generic, add bios match */
+ DMI_MATCH(DMI_BIOS_VERSION, "E.WSA116_8.E1.042.bin"),
+ DMI_MATCH(DMI_BIOS_DATE, "01/08/2020"),
+ },
+ },
{
/* Jumper EZpad 6 m4 */
.driver_data = (void *)&jumper_ezpad_6_m4_data,
--
2.43.0
From: Witold Sadowski <[email protected]>
[ Upstream commit 4a69c1264ff41bc5bf7c03101ada0454fbf08868 ]
During dummy-cycles xSPI will switch GPIO into Hi-Z mode. In that dummy
period voltage on data lines will slowly drop, what can cause
unintentional modebyte transmission. Value send to SPI memory chip will
depend on last address, and clock frequency.
To prevent unforeseen consequences of that behaviour, force send
single modebyte(0x00).
Modebyte will be send only if number of dummy-cycles is not equal
to 0. Code must also reduce dummycycle byte count by one - as one byte
is send as modebyte.
Signed-off-by: Witold Sadowski <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-cadence-xspi.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/spi/spi-cadence-xspi.c b/drivers/spi/spi-cadence-xspi.c
index b7e04b03be58e..ee342501b759f 100644
--- a/drivers/spi/spi-cadence-xspi.c
+++ b/drivers/spi/spi-cadence-xspi.c
@@ -145,6 +145,9 @@
#define CDNS_XSPI_STIG_DONE_FLAG BIT(0)
#define CDNS_XSPI_TRD_STATUS 0x0104
+#define MODE_NO_OF_BYTES GENMASK(25, 24)
+#define MODEBYTES_COUNT 1
+
/* Helper macros for filling command registers */
#define CDNS_XSPI_CMD_FLD_P1_INSTR_CMD_1(op, data_phase) ( \
FIELD_PREP(CDNS_XSPI_CMD_INSTR_TYPE, (data_phase) ? \
@@ -157,9 +160,10 @@
FIELD_PREP(CDNS_XSPI_CMD_P1_R2_ADDR3, ((op)->addr.val >> 24) & 0xFF) | \
FIELD_PREP(CDNS_XSPI_CMD_P1_R2_ADDR4, ((op)->addr.val >> 32) & 0xFF))
-#define CDNS_XSPI_CMD_FLD_P1_INSTR_CMD_3(op) ( \
+#define CDNS_XSPI_CMD_FLD_P1_INSTR_CMD_3(op, modebytes) ( \
FIELD_PREP(CDNS_XSPI_CMD_P1_R3_ADDR5, ((op)->addr.val >> 40) & 0xFF) | \
FIELD_PREP(CDNS_XSPI_CMD_P1_R3_CMD, (op)->cmd.opcode) | \
+ FIELD_PREP(MODE_NO_OF_BYTES, modebytes) | \
FIELD_PREP(CDNS_XSPI_CMD_P1_R3_NUM_ADDR_BYTES, (op)->addr.nbytes))
#define CDNS_XSPI_CMD_FLD_P1_INSTR_CMD_4(op, chipsel) ( \
@@ -173,12 +177,12 @@
#define CDNS_XSPI_CMD_FLD_DSEQ_CMD_2(op) \
FIELD_PREP(CDNS_XSPI_CMD_DSEQ_R2_DCNT_L, (op)->data.nbytes & 0xFFFF)
-#define CDNS_XSPI_CMD_FLD_DSEQ_CMD_3(op) ( \
+#define CDNS_XSPI_CMD_FLD_DSEQ_CMD_3(op, dummybytes) ( \
FIELD_PREP(CDNS_XSPI_CMD_DSEQ_R3_DCNT_H, \
((op)->data.nbytes >> 16) & 0xffff) | \
FIELD_PREP(CDNS_XSPI_CMD_DSEQ_R3_NUM_OF_DUMMY, \
(op)->dummy.buswidth != 0 ? \
- (((op)->dummy.nbytes * 8) / (op)->dummy.buswidth) : \
+ (((dummybytes) * 8) / (op)->dummy.buswidth) : \
0))
#define CDNS_XSPI_CMD_FLD_DSEQ_CMD_4(op, chipsel) ( \
@@ -351,6 +355,7 @@ static int cdns_xspi_send_stig_command(struct cdns_xspi_dev *cdns_xspi,
u32 cmd_regs[6];
u32 cmd_status;
int ret;
+ int dummybytes = op->dummy.nbytes;
ret = cdns_xspi_wait_for_controller_idle(cdns_xspi);
if (ret < 0)
@@ -365,7 +370,12 @@ static int cdns_xspi_send_stig_command(struct cdns_xspi_dev *cdns_xspi,
memset(cmd_regs, 0, sizeof(cmd_regs));
cmd_regs[1] = CDNS_XSPI_CMD_FLD_P1_INSTR_CMD_1(op, data_phase);
cmd_regs[2] = CDNS_XSPI_CMD_FLD_P1_INSTR_CMD_2(op);
- cmd_regs[3] = CDNS_XSPI_CMD_FLD_P1_INSTR_CMD_3(op);
+ if (dummybytes != 0) {
+ cmd_regs[3] = CDNS_XSPI_CMD_FLD_P1_INSTR_CMD_3(op, 1);
+ dummybytes--;
+ } else {
+ cmd_regs[3] = CDNS_XSPI_CMD_FLD_P1_INSTR_CMD_3(op, 0);
+ }
cmd_regs[4] = CDNS_XSPI_CMD_FLD_P1_INSTR_CMD_4(op,
cdns_xspi->cur_cs);
@@ -375,7 +385,7 @@ static int cdns_xspi_send_stig_command(struct cdns_xspi_dev *cdns_xspi,
cmd_regs[0] = CDNS_XSPI_STIG_DONE_FLAG;
cmd_regs[1] = CDNS_XSPI_CMD_FLD_DSEQ_CMD_1(op);
cmd_regs[2] = CDNS_XSPI_CMD_FLD_DSEQ_CMD_2(op);
- cmd_regs[3] = CDNS_XSPI_CMD_FLD_DSEQ_CMD_3(op);
+ cmd_regs[3] = CDNS_XSPI_CMD_FLD_DSEQ_CMD_3(op, dummybytes);
cmd_regs[4] = CDNS_XSPI_CMD_FLD_DSEQ_CMD_4(op,
cdns_xspi->cur_cs);
--
2.43.0
From: hmtheboy154 <[email protected]>
[ Upstream commit 7c8639aa41343fd7b3dbe09baf6b0791fcc407a1 ]
This is a tablet created by GlobalSpace Technologies Limited
which uses an Intel Atom x5-Z8300, 4GB of RAM & 64GB of storage.
Link: https://web.archive.org/web/20171102141952/http://globalspace.in/11.6-device.html
Signed-off-by: hmtheboy154 <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/touchscreen_dmi.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index dc244e17754e6..86e8d78ae7c1b 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -905,6 +905,22 @@ static const struct ts_dmi_data schneider_sct101ctm_data = {
.properties = schneider_sct101ctm_props,
};
+static const struct property_entry globalspace_solt_ivw116_props[] = {
+ PROPERTY_ENTRY_U32("touchscreen-min-x", 7),
+ PROPERTY_ENTRY_U32("touchscreen-min-y", 22),
+ PROPERTY_ENTRY_U32("touchscreen-size-x", 1723),
+ PROPERTY_ENTRY_U32("touchscreen-size-y", 1077),
+ PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-globalspace-solt-ivw116.fw"),
+ PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+ PROPERTY_ENTRY_BOOL("silead,home-button"),
+ { }
+};
+
+static const struct ts_dmi_data globalspace_solt_ivw116_data = {
+ .acpi_name = "MSSL1680:00",
+ .properties = globalspace_solt_ivw116_props,
+};
+
static const struct property_entry techbite_arc_11_6_props[] = {
PROPERTY_ENTRY_U32("touchscreen-min-x", 5),
PROPERTY_ENTRY_U32("touchscreen-min-y", 7),
@@ -1632,6 +1648,15 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "SCT101CTM"),
},
},
+ {
+ /* GlobalSpace SoLT IVW 11.6" */
+ .driver_data = (void *)&globalspace_solt_ivw116_data,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Globalspace Tech Pvt Ltd"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SolTIVW"),
+ DMI_MATCH(DMI_PRODUCT_SKU, "PN20170413488"),
+ },
+ },
{
/* Techbite Arc 11.6 */
.driver_data = (void *)&techbite_arc_11_6_data,
--
2.43.0
From: Fedor Pchelkin <[email protected]>
[ Upstream commit f7c9ccaadffd13066353332c13d7e9bf73b8f92d ]
If do_map_benchmark() has failed, there is nothing useful to copy back
to userspace.
Suggested-by: Barry Song <[email protected]>
Signed-off-by: Fedor Pchelkin <[email protected]>
Acked-by: Robin Murphy <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/dma/map_benchmark.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/kernel/dma/map_benchmark.c b/kernel/dma/map_benchmark.c
index 02205ab53b7e9..28ca165cb62c1 100644
--- a/kernel/dma/map_benchmark.c
+++ b/kernel/dma/map_benchmark.c
@@ -252,6 +252,9 @@ static long map_benchmark_ioctl(struct file *file, unsigned int cmd,
* dma_mask changed by benchmark
*/
dma_set_mask(map->dev, old_dma_mask);
+
+ if (ret)
+ return ret;
break;
default:
return -EINVAL;
--
2.43.0
From: Alex Deucher <[email protected]>
[ Upstream commit 05d9e24ddb15160164ba6e917a88c00907dc2434 ]
Convert a variable sized array from [1] to [].
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/include/atomfirmware.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/include/atomfirmware.h b/drivers/gpu/drm/amd/include/atomfirmware.h
index fa7d6ced786f1..06be085515200 100644
--- a/drivers/gpu/drm/amd/include/atomfirmware.h
+++ b/drivers/gpu/drm/amd/include/atomfirmware.h
@@ -3508,7 +3508,7 @@ struct atom_gpio_voltage_object_v4
uint8_t phase_delay_us; // phase delay in unit of micro second
uint8_t reserved;
uint32_t gpio_mask_val; // GPIO Mask value
- struct atom_voltage_gpio_map_lut voltage_gpio_lut[1];
+ struct atom_voltage_gpio_map_lut voltage_gpio_lut[] __counted_by(gpio_entry_num);
};
struct atom_svid2_voltage_object_v4
--
2.43.0