Interrupt flags 0x2008 looks like some downstream copy-paste, because
generic GPIOLIB code, used by Qualcomm pin controller drivers, ignores
flags outside of IRQ_TYPE_SENSE_MASK. Probably the intention was to
pass just 0x8, so IRQ_TYPE_LEVEL_LOW.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
index 8b29fcf483a3..17dbb67868ae 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
@@ -488,7 +488,7 @@ touchscreen@48 {
compatible = "samsung,s6sy761";
reg = <0x48>;
interrupt-parent = <&tlmm>;
- interrupts = <21 0x2008>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
vdd-supply = <&pm8350c_l2>;
avdd-supply = <&pm8350c_l3>;
--
2.43.0
On 5.06.2024 6:00 PM, Krzysztof Kozlowski wrote:
> Interrupt flags 0x2008 looks like some downstream copy-paste, because
> generic GPIOLIB code, used by Qualcomm pin controller drivers, ignores
> flags outside of IRQ_TYPE_SENSE_MASK. Probably the intention was to
> pass just 0x8, so IRQ_TYPE_LEVEL_LOW.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
I only tested on one 8450 device, but they're all:
- the same tlmm
- the same geni
- the same touchscreen
so I suppose it's alright
Reviewed-by: Konrad Dybcio <[email protected]>
Tested-by: Konrad Dybcio <[email protected]> # SM8450 PDX223
Konrad