The proper way to clear error conditions is to use the SRES
register rather than simple clearing SISC.
Signed-off-by: Eddie James <[email protected]>
---
drivers/fsi/fsi-core.c | 9 +++++----
drivers/fsi/fsi-slave.h | 6 ++++++
2 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 93bbdcf50a89a..ce9762d1bd8b0 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -166,7 +166,7 @@ static int fsi_slave_calc_addr(struct fsi_slave *slave, uint32_t *addrp,
static int fsi_slave_report_and_clear_errors(struct fsi_slave *slave)
{
struct fsi_master *master = slave->master;
- __be32 irq, stat;
+ __be32 irq, reset, stat;
int rc, link;
uint8_t id;
@@ -187,9 +187,10 @@ static int fsi_slave_report_and_clear_errors(struct fsi_slave *slave)
be32_to_cpu(stat), be32_to_cpu(irq));
trace_fsi_slave_error(slave, be32_to_cpu(irq), be32_to_cpu(stat));
- /* clear interrupts */
- return fsi_master_write(master, link, id, FSI_SLAVE_BASE + FSI_SISC,
- &irq, sizeof(irq));
+ /* reset errors */
+ reset = cpu_to_be32(FSI_SRES_ERRS);
+ return fsi_master_write(master, link, id, FSI_SLAVE_BASE + FSI_SRES, &reset,
+ sizeof(reset));
}
/* Encode slave local bus echo delay */
diff --git a/drivers/fsi/fsi-slave.h b/drivers/fsi/fsi-slave.h
index fabc0b66d5bf3..e9fd4be6f3760 100644
--- a/drivers/fsi/fsi-slave.h
+++ b/drivers/fsi/fsi-slave.h
@@ -24,6 +24,7 @@
#define FSI_SSI1M 0x1c /* S : Set slave interrupt 1 mask */
#define FSI_SCI1M 0x20 /* C : Clear slave interrupt 1 mask */
#define FSI_SLBUS 0x30 /* W : LBUS Ownership */
+#define FSI_SRES 0x34 /* W : Reset */
#define FSI_SRSIC0 0x68 /* C : Clear remote interrupt condition */
#define FSI_SRSIC4 0x6c /* C : Clear remote interrupt condition */
#define FSI_SRSIM0 0x70 /* R/W: Remote interrupt mask */
@@ -90,6 +91,11 @@
*/
#define FSI_SLBUS_FORCE 0x80000000 /* Force LBUS ownership */
+/*
+ * SRES fields
+ */
+#define FSI_SRES_ERRS 0x40000000 /* Reset FSI slave errors */
+
/*
* LLMODE fields
*/
--
2.39.3