Move the IIO device allocation before the actual initialization
of the chip to be more consistent with most IIO drivers and also
to have the ability to use any driver specific data for the chip
initialization.
While at it, fix also a misaligned line.
Signed-off-by: Vasileios Amoiridis <[email protected]>
---
drivers/iio/chemical/bme680_core.c | 38 +++++++++++++++---------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c
index f96cd4157c95..9d33952e5d01 100644
--- a/drivers/iio/chemical/bme680_core.c
+++ b/drivers/iio/chemical/bme680_core.c
@@ -837,25 +837,6 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap,
unsigned int val;
int ret;
- ret = regmap_write(regmap, BME680_REG_SOFT_RESET,
- BME680_CMD_SOFTRESET);
- if (ret < 0) {
- dev_err(dev, "Failed to reset chip\n");
- return ret;
- }
-
- ret = regmap_read(regmap, BME680_REG_CHIP_ID, &val);
- if (ret < 0) {
- dev_err(dev, "Error reading chip ID\n");
- return ret;
- }
-
- if (val != BME680_CHIP_ID_VAL) {
- dev_err(dev, "Wrong chip ID, got %x expected %x\n",
- val, BME680_CHIP_ID_VAL);
- return -ENODEV;
- }
-
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
@@ -877,6 +858,25 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap,
data->heater_temp = 320; /* degree Celsius */
data->heater_dur = 150; /* milliseconds */
+ ret = regmap_write(regmap, BME680_REG_SOFT_RESET,
+ BME680_CMD_SOFTRESET);
+ if (ret < 0) {
+ dev_err(dev, "Failed to reset chip\n");
+ return ret;
+ }
+
+ ret = regmap_read(regmap, BME680_REG_CHIP_ID, &val);
+ if (ret < 0) {
+ dev_err(dev, "Error reading chip ID\n");
+ return ret;
+ }
+
+ if (val != BME680_CHIP_ID_VAL) {
+ dev_err(dev, "Wrong chip ID, got %x expected %x\n",
+ val, BME680_CHIP_ID_VAL);
+ return -ENODEV;
+ }
+
ret = bme680_chip_config(data);
if (ret < 0) {
dev_err(dev, "failed to set chip_config data\n");
--
2.25.1