The device has four programmable temperature alert outputs which can be
used to monitor hot or cold-junction temperatures and detect falling and
rising temperatures. It supports up to 255 degree celsius programmable
hysteresis. Each alert can be individually configured by setting following
options in the associated alert configuration register:
- monitor hot or cold junction temperature
- monitor rising or falling temperature
- set comparator or interrupt mode
- set output polarity
- enable alert
This patch binds alert outputs to iio events:
- alert1: hot junction, rising temperature
- alert2: hot junction, falling temperature
- alert3: cold junction, rising temperature
- alert4: cold junction, falling temperature
All outputs are set in comparator mode and polarity depends on interrupt
configuration.
Signed-off-by: Dimitri Fedrau <[email protected]>
---
Changes in V2:
- Remove pretty printing patches from series
- Add patch for providing index for both channels(ABI change)!
Suggested by Jonathan, hope this okay.
- Remove formatting in a precursor patch
- Add lock documentation
- Add define MCP9600_TEMP_SCALE_NUM and use it instead of MICRO. MICRO is
type unsigned long which we have to cast to int when using
multiplication or division, because we are handling negative values.
- Use switch statement in mcp9600_write_thresh
- Replaced generic interrupt handler with four separate interrupt handler
- Use one lock instead of four
- Added error check for mcp9600_probe_alerts
Changes in V3:
- Remove patch for providing index for both channels(ABI change)!
- Treat hysteresis as offset and remove the lock, since dependency
between hysteresis and threshold doesn't exist anymore.
- Use helper function for handling alerts to avoid code duplication
- Scale max,min defines for hot and cold junction temperature to micro
Changes in V4:
- Added version number of patch
Changes in V5:
- move "struct iio_dev *indio_dev = private;" to mcp9600_alert_handler
instead of setting it in each alert handler to avoid code duplication
- Only create sysfs interfaces for events which are present.
---
drivers/iio/temperature/mcp9600.c | 363 ++++++++++++++++++++++++++++--
1 file changed, 349 insertions(+), 14 deletions(-)
diff --git a/drivers/iio/temperature/mcp9600.c b/drivers/iio/temperature/mcp9600.c
index 46845804292b..bfa873731d61 100644
--- a/drivers/iio/temperature/mcp9600.c
+++ b/drivers/iio/temperature/mcp9600.c
@@ -6,39 +6,123 @@
* Author: <[email protected]>
*/
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/bits.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/math.h>
+#include <linux/minmax.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
+#include <linux/iio/events.h>
#include <linux/iio/iio.h>
/* MCP9600 registers */
#define MCP9600_HOT_JUNCTION 0x0
#define MCP9600_COLD_JUNCTION 0x2
+#define MCP9600_STATUS 0x4
+#define MCP9600_STATUS_ALERT(x) BIT(x)
+#define MCP9600_ALERT_CFG1 0x8
+#define MCP9600_ALERT_CFG(x) (MCP9600_ALERT_CFG1 + (x - 1))
+#define MCP9600_ALERT_CFG_ENABLE BIT(0)
+#define MCP9600_ALERT_CFG_ACTIVE_HIGH BIT(2)
+#define MCP9600_ALERT_CFG_FALLING BIT(3)
+#define MCP9600_ALERT_CFG_COLD_JUNCTION BIT(4)
+#define MCP9600_ALERT_HYSTERESIS1 0xc
+#define MCP9600_ALERT_HYSTERESIS(x) (MCP9600_ALERT_HYSTERESIS1 + (x - 1))
+#define MCP9600_ALERT_LIMIT1 0x10
+#define MCP9600_ALERT_LIMIT(x) (MCP9600_ALERT_LIMIT1 + (x - 1))
+#define MCP9600_ALERT_LIMIT_MASK GENMASK(15, 2)
#define MCP9600_DEVICE_ID 0x20
/* MCP9600 device id value */
#define MCP9600_DEVICE_ID_MCP9600 0x40
-static const struct iio_chan_spec mcp9600_channels[] = {
+#define MCP9600_ALERT_COUNT 4
+
+#define MCP9600_MIN_TEMP_HOT_JUNCTION_MICRO -200000000
+#define MCP9600_MAX_TEMP_HOT_JUNCTION_MICRO 1800000000
+
+#define MCP9600_MIN_TEMP_COLD_JUNCTION_MICRO -40000000
+#define MCP9600_MAX_TEMP_COLD_JUNCTION_MICRO 125000000
+
+enum mcp9600_alert {
+ MCP9600_ALERT1,
+ MCP9600_ALERT2,
+ MCP9600_ALERT3,
+ MCP9600_ALERT4
+};
+
+static const char * const mcp9600_alert_name[MCP9600_ALERT_COUNT] = {
+ [MCP9600_ALERT1] = "alert1",
+ [MCP9600_ALERT2] = "alert2",
+ [MCP9600_ALERT3] = "alert3",
+ [MCP9600_ALERT4] = "alert4",
+};
+
+static const struct iio_event_spec mcp9600_events[] = {
{
- .type = IIO_TEMP,
- .address = MCP9600_HOT_JUNCTION,
- .info_mask_separate =
- BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE) |
+ BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_HYSTERESIS),
},
{
- .type = IIO_TEMP,
- .address = MCP9600_COLD_JUNCTION,
- .channel2 = IIO_MOD_TEMP_AMBIENT,
- .modified = 1,
- .info_mask_separate =
- BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE) |
+ BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_HYSTERESIS),
},
};
+#define MCP9600_CHANNELS(hj_num_ev, hj_ev_spec_off, cj_num_ev, cj_ev_spec_off) \
+ { \
+ { \
+ .type = IIO_TEMP, \
+ .address = MCP9600_HOT_JUNCTION, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ .event_spec = &mcp9600_events[hj_ev_spec_off], \
+ .num_event_specs = hj_num_ev, \
+ }, \
+ { \
+ .type = IIO_TEMP, \
+ .address = MCP9600_COLD_JUNCTION, \
+ .channel2 = IIO_MOD_TEMP_AMBIENT, \
+ .modified = 1, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ .event_spec = &mcp9600_events[cj_ev_spec_off], \
+ .num_event_specs = cj_num_ev, \
+ }, \
+ }
+
+static const struct iio_chan_spec mcp9600_channels[][2] = {
+ MCP9600_CHANNELS(0, 0, 0, 0), /* Alerts: - - - - */
+ MCP9600_CHANNELS(1, 0, 0, 0), /* Alerts: 1 - - - */
+ MCP9600_CHANNELS(1, 1, 0, 0), /* Alerts: - 2 - - */
+ MCP9600_CHANNELS(2, 0, 0, 0), /* Alerts: 1 2 - - */
+ MCP9600_CHANNELS(0, 0, 1, 0), /* Alerts: - - 3 - */
+ MCP9600_CHANNELS(1, 0, 1, 0), /* Alerts: 1 - 3 - */
+ MCP9600_CHANNELS(1, 1, 1, 0), /* Alerts: - 2 3 - */
+ MCP9600_CHANNELS(2, 0, 1, 0), /* Alerts: 1 2 3 - */
+ MCP9600_CHANNELS(0, 0, 1, 1), /* Alerts: - - - 4 */
+ MCP9600_CHANNELS(1, 0, 1, 1), /* Alerts: 1 - - 4 */
+ MCP9600_CHANNELS(1, 1, 1, 1), /* Alerts: - 2 - 4 */
+ MCP9600_CHANNELS(2, 0, 1, 1), /* Alerts: 1 2 - 4 */
+ MCP9600_CHANNELS(0, 0, 2, 0), /* Alerts: - - 3 4 */
+ MCP9600_CHANNELS(1, 0, 2, 0), /* Alerts: 1 - 3 4 */
+ MCP9600_CHANNELS(1, 1, 2, 0), /* Alerts: - 2 3 4 */
+ MCP9600_CHANNELS(2, 0, 2, 0), /* Alerts: 1 2 3 4 */
+};
+
struct mcp9600_data {
struct i2c_client *client;
};
@@ -79,15 +163,261 @@ static int mcp9600_read_raw(struct iio_dev *indio_dev,
}
}
+static int mcp9600_get_alert_index(int channel2, enum iio_event_direction dir)
+{
+ if (channel2 == IIO_MOD_TEMP_AMBIENT) {
+ if (dir == IIO_EV_DIR_RISING)
+ return MCP9600_ALERT3;
+ else
+ return MCP9600_ALERT4;
+ } else {
+ if (dir == IIO_EV_DIR_RISING)
+ return MCP9600_ALERT1;
+ else
+ return MCP9600_ALERT2;
+ }
+}
+
+static int mcp9600_read_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
+{
+ struct mcp9600_data *data = iio_priv(indio_dev);
+ struct i2c_client *client = data->client;
+ int i, ret;
+
+ i = mcp9600_get_alert_index(chan->channel2, dir);
+ ret = i2c_smbus_read_byte_data(client, MCP9600_ALERT_CFG(i + 1));
+ if (ret < 0)
+ return ret;
+
+ return FIELD_GET(MCP9600_ALERT_CFG_ENABLE, ret);
+}
+
+static int mcp9600_write_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ int state)
+{
+ struct mcp9600_data *data = iio_priv(indio_dev);
+ struct i2c_client *client = data->client;
+ int i, ret;
+
+ i = mcp9600_get_alert_index(chan->channel2, dir);
+ ret = i2c_smbus_read_byte_data(client, MCP9600_ALERT_CFG(i + 1));
+ if (ret < 0)
+ return ret;
+
+ if (state)
+ ret |= MCP9600_ALERT_CFG_ENABLE;
+ else
+ ret &= ~MCP9600_ALERT_CFG_ENABLE;
+
+ return i2c_smbus_write_byte_data(client, MCP9600_ALERT_CFG(i + 1), ret);
+}
+
+static int mcp9600_read_thresh(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info, int *val, int *val2)
+{
+ struct mcp9600_data *data = iio_priv(indio_dev);
+ struct i2c_client *client = data->client;
+ s32 ret;
+ int i;
+
+ i = mcp9600_get_alert_index(chan->channel2, dir);
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ ret = i2c_smbus_read_word_swapped(client, MCP9600_ALERT_LIMIT(i + 1));
+ if (ret < 0)
+ return ret;
+ /*
+ * Temperature is stored in two’s complement format in
+ * bits(15:2), LSB is 0.25 degree celsius.
+ */
+ *val = sign_extend32(FIELD_GET(MCP9600_ALERT_LIMIT_MASK, ret), 13);
+ *val2 = 4;
+ return IIO_VAL_FRACTIONAL;
+ case IIO_EV_INFO_HYSTERESIS:
+ ret = i2c_smbus_read_byte_data(client, MCP9600_ALERT_HYSTERESIS(i + 1));
+ if (ret < 0)
+ return ret;
+
+ *val = ret;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int mcp9600_write_thresh(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info, int val, int val2)
+{
+ struct mcp9600_data *data = iio_priv(indio_dev);
+ struct i2c_client *client = data->client;
+ int s_val, i;
+ s16 thresh;
+ u8 hyst;
+
+ i = mcp9600_get_alert_index(chan->channel2, dir);
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ /* Scale value to include decimal part into calculations */
+ s_val = (val < 0) ? ((val * 1000000) - val2) :
+ ((val * 1000000) + val2);
+ if (chan->channel2 == IIO_MOD_TEMP_AMBIENT) {
+ s_val = max(s_val, MCP9600_MIN_TEMP_COLD_JUNCTION_MICRO);
+ s_val = min(s_val, MCP9600_MAX_TEMP_COLD_JUNCTION_MICRO);
+ } else {
+ s_val = max(s_val, MCP9600_MIN_TEMP_HOT_JUNCTION_MICRO);
+ s_val = min(s_val, MCP9600_MAX_TEMP_HOT_JUNCTION_MICRO);
+ }
+
+ /*
+ * Shift length 4 bits = 2(15:2) + 2(0.25 LSB), temperature is
+ * stored in two’s complement format.
+ */
+ thresh = (s16)(s_val / (1000000 >> 4));
+ return i2c_smbus_write_word_swapped(client,
+ MCP9600_ALERT_LIMIT(i + 1),
+ thresh);
+ case IIO_EV_INFO_HYSTERESIS:
+ hyst = min(abs(val), 255);
+ return i2c_smbus_write_byte_data(client,
+ MCP9600_ALERT_HYSTERESIS(i + 1),
+ hyst);
+ default:
+ return -EINVAL;
+ }
+}
+
static const struct iio_info mcp9600_info = {
.read_raw = mcp9600_read_raw,
+ .read_event_config = mcp9600_read_event_config,
+ .write_event_config = mcp9600_write_event_config,
+ .read_event_value = mcp9600_read_thresh,
+ .write_event_value = mcp9600_write_thresh,
};
+static irqreturn_t mcp9600_alert_handler(void *private,
+ enum mcp9600_alert alert,
+ enum iio_modifier mod,
+ enum iio_event_direction dir)
+{
+ struct iio_dev *indio_dev = private;
+ struct mcp9600_data *data = iio_priv(indio_dev);
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(data->client, MCP9600_STATUS);
+ if (ret < 0)
+ return IRQ_HANDLED;
+
+ if (!(ret & MCP9600_STATUS_ALERT(alert)))
+ return IRQ_NONE;
+
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_TEMP, 0, mod, IIO_EV_TYPE_THRESH,
+ dir),
+ iio_get_time_ns(indio_dev));
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mcp9600_alert1_handler(int irq, void *private)
+{
+ return mcp9600_alert_handler(private, MCP9600_ALERT1, IIO_NO_MOD,
+ IIO_EV_DIR_RISING);
+}
+
+static irqreturn_t mcp9600_alert2_handler(int irq, void *private)
+{
+ return mcp9600_alert_handler(private, MCP9600_ALERT2, IIO_NO_MOD,
+ IIO_EV_DIR_FALLING);
+}
+
+static irqreturn_t mcp9600_alert3_handler(int irq, void *private)
+{
+ return mcp9600_alert_handler(private, MCP9600_ALERT3,
+ IIO_MOD_TEMP_AMBIENT, IIO_EV_DIR_RISING);
+}
+
+static irqreturn_t mcp9600_alert4_handler(int irq, void *private)
+{
+ return mcp9600_alert_handler(private, MCP9600_ALERT4,
+ IIO_MOD_TEMP_AMBIENT, IIO_EV_DIR_FALLING);
+}
+
+static irqreturn_t (*mcp9600_alert_handler_func[MCP9600_ALERT_COUNT]) (int, void *) = {
+ mcp9600_alert1_handler,
+ mcp9600_alert2_handler,
+ mcp9600_alert3_handler,
+ mcp9600_alert4_handler,
+};
+
+static int mcp9600_probe_alerts(struct iio_dev *indio_dev)
+{
+ struct mcp9600_data *data = iio_priv(indio_dev);
+ struct i2c_client *client = data->client;
+ struct device *dev = &client->dev;
+ struct fwnode_handle *fwnode = dev_fwnode(dev);
+ unsigned int irq_type;
+ int ret, irq, i;
+ u8 val, ch_sel;
+
+ /*
+ * alert1: hot junction, rising temperature
+ * alert2: hot junction, falling temperature
+ * alert3: cold junction, rising temperature
+ * alert4: cold junction, falling temperature
+ */
+ ch_sel = 0;
+ for (i = 0; i < MCP9600_ALERT_COUNT; i++) {
+ irq = fwnode_irq_get_byname(fwnode, mcp9600_alert_name[i]);
+ if (irq <= 0)
+ continue;
+
+ val = 0;
+ irq_type = irq_get_trigger_type(irq);
+ if (irq_type == IRQ_TYPE_EDGE_RISING)
+ val |= MCP9600_ALERT_CFG_ACTIVE_HIGH;
+
+ if (i == MCP9600_ALERT2 || i == MCP9600_ALERT4)
+ val |= MCP9600_ALERT_CFG_FALLING;
+
+ if (i == MCP9600_ALERT3 || i == MCP9600_ALERT4)
+ val |= MCP9600_ALERT_CFG_COLD_JUNCTION;
+
+ ret = i2c_smbus_write_byte_data(client,
+ MCP9600_ALERT_CFG(i + 1),
+ val);
+ if (ret < 0)
+ return ret;
+
+ ret = devm_request_threaded_irq(dev, irq, NULL,
+ mcp9600_alert_handler_func[i],
+ IRQF_ONESHOT, "mcp9600",
+ indio_dev);
+ if (ret)
+ return ret;
+
+ ch_sel |= BIT(i);
+ }
+
+ return ch_sel;
+}
+
static int mcp9600_probe(struct i2c_client *client)
{
struct iio_dev *indio_dev;
struct mcp9600_data *data;
- int ret;
+ int ret, ch_sel;
ret = i2c_smbus_read_byte_data(client, MCP9600_DEVICE_ID);
if (ret < 0)
@@ -103,11 +433,15 @@ static int mcp9600_probe(struct i2c_client *client)
data = iio_priv(indio_dev);
data->client = client;
+ ch_sel = mcp9600_probe_alerts(indio_dev);
+ if (ch_sel < 0)
+ return ch_sel;
+
indio_dev->info = &mcp9600_info;
indio_dev->name = "mcp9600";
indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->channels = mcp9600_channels;
- indio_dev->num_channels = ARRAY_SIZE(mcp9600_channels);
+ indio_dev->channels = mcp9600_channels[ch_sel];
+ indio_dev->num_channels = ARRAY_SIZE(mcp9600_channels[ch_sel]);
return devm_iio_device_register(&client->dev, indio_dev);
}
@@ -134,6 +468,7 @@ static struct i2c_driver mcp9600_driver = {
};
module_i2c_driver(mcp9600_driver);
+MODULE_AUTHOR("Dimitri Fedrau <[email protected]>");
MODULE_AUTHOR("Andrew Hepp <[email protected]>");
MODULE_DESCRIPTION("Microchip MCP9600 thermocouple EMF converter driver");
MODULE_LICENSE("GPL");
--
2.39.2
On Tue, 4 Jun 2024 15:36:39 +0200
Dimitri Fedrau <[email protected]> wrote:
> The device has four programmable temperature alert outputs which can be
> used to monitor hot or cold-junction temperatures and detect falling and
> rising temperatures. It supports up to 255 degree celsius programmable
> hysteresis. Each alert can be individually configured by setting following
> options in the associated alert configuration register:
> - monitor hot or cold junction temperature
> - monitor rising or falling temperature
> - set comparator or interrupt mode
> - set output polarity
> - enable alert
>
> This patch binds alert outputs to iio events:
> - alert1: hot junction, rising temperature
> - alert2: hot junction, falling temperature
> - alert3: cold junction, rising temperature
> - alert4: cold junction, falling temperature
>
> All outputs are set in comparator mode and polarity depends on interrupt
> configuration.
>
> Signed-off-by: Dimitri Fedrau <[email protected]>
I think I'd have done this by taking a copy of the channels array and
putting just replacing the .event_spec and .num_event_specs fields
but what you have here works so fair enough. It's always a fine
balance between when it makes sense to make everything data that you
pick from and when you use code to tweak that data a little.
Applied to the togreg branch of iio.git and pushed out as testing
for 0-day to take a look.
Thanks,
Jonathan
> ---
>
> Changes in V2:
> - Remove pretty printing patches from series
> - Add patch for providing index for both channels(ABI change)!
> Suggested by Jonathan, hope this okay.
> - Remove formatting in a precursor patch
> - Add lock documentation
> - Add define MCP9600_TEMP_SCALE_NUM and use it instead of MICRO. MICRO is
> type unsigned long which we have to cast to int when using
> multiplication or division, because we are handling negative values.
> - Use switch statement in mcp9600_write_thresh
> - Replaced generic interrupt handler with four separate interrupt handler
> - Use one lock instead of four
> - Added error check for mcp9600_probe_alerts
>
> Changes in V3:
> - Remove patch for providing index for both channels(ABI change)!
> - Treat hysteresis as offset and remove the lock, since dependency
> between hysteresis and threshold doesn't exist anymore.
> - Use helper function for handling alerts to avoid code duplication
> - Scale max,min defines for hot and cold junction temperature to micro
>
> Changes in V4:
> - Added version number of patch
>
> Changes in V5:
> - move "struct iio_dev *indio_dev = private;" to mcp9600_alert_handler
> instead of setting it in each alert handler to avoid code duplication
> - Only create sysfs interfaces for events which are present.
>
> ---
> drivers/iio/temperature/mcp9600.c | 363 ++++++++++++++++++++++++++++--
> 1 file changed, 349 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/iio/temperature/mcp9600.c b/drivers/iio/temperature/mcp9600.c
> index 46845804292b..bfa873731d61 100644
> --- a/drivers/iio/temperature/mcp9600.c
> +++ b/drivers/iio/temperature/mcp9600.c
> @@ -6,39 +6,123 @@
> * Author: <[email protected]>
> */
>
> +#include <linux/bitfield.h>
> +#include <linux/bitops.h>
> +#include <linux/bits.h>
> #include <linux/err.h>
> #include <linux/i2c.h>
> #include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/math.h>
> +#include <linux/minmax.h>
> #include <linux/mod_devicetable.h>
> #include <linux/module.h>
>
> +#include <linux/iio/events.h>
> #include <linux/iio/iio.h>
>
> /* MCP9600 registers */
> #define MCP9600_HOT_JUNCTION 0x0
> #define MCP9600_COLD_JUNCTION 0x2
> +#define MCP9600_STATUS 0x4
> +#define MCP9600_STATUS_ALERT(x) BIT(x)
> +#define MCP9600_ALERT_CFG1 0x8
> +#define MCP9600_ALERT_CFG(x) (MCP9600_ALERT_CFG1 + (x - 1))
> +#define MCP9600_ALERT_CFG_ENABLE BIT(0)
> +#define MCP9600_ALERT_CFG_ACTIVE_HIGH BIT(2)
> +#define MCP9600_ALERT_CFG_FALLING BIT(3)
> +#define MCP9600_ALERT_CFG_COLD_JUNCTION BIT(4)
> +#define MCP9600_ALERT_HYSTERESIS1 0xc
> +#define MCP9600_ALERT_HYSTERESIS(x) (MCP9600_ALERT_HYSTERESIS1 + (x - 1))
> +#define MCP9600_ALERT_LIMIT1 0x10
> +#define MCP9600_ALERT_LIMIT(x) (MCP9600_ALERT_LIMIT1 + (x - 1))
> +#define MCP9600_ALERT_LIMIT_MASK GENMASK(15, 2)
> #define MCP9600_DEVICE_ID 0x20
>
> /* MCP9600 device id value */
> #define MCP9600_DEVICE_ID_MCP9600 0x40
>
> -static const struct iio_chan_spec mcp9600_channels[] = {
> +#define MCP9600_ALERT_COUNT 4
> +
> +#define MCP9600_MIN_TEMP_HOT_JUNCTION_MICRO -200000000
> +#define MCP9600_MAX_TEMP_HOT_JUNCTION_MICRO 1800000000
> +
> +#define MCP9600_MIN_TEMP_COLD_JUNCTION_MICRO -40000000
> +#define MCP9600_MAX_TEMP_COLD_JUNCTION_MICRO 125000000
> +
> +enum mcp9600_alert {
> + MCP9600_ALERT1,
> + MCP9600_ALERT2,
> + MCP9600_ALERT3,
> + MCP9600_ALERT4
> +};
> +
> +static const char * const mcp9600_alert_name[MCP9600_ALERT_COUNT] = {
> + [MCP9600_ALERT1] = "alert1",
> + [MCP9600_ALERT2] = "alert2",
> + [MCP9600_ALERT3] = "alert3",
> + [MCP9600_ALERT4] = "alert4",
> +};
> +
> +static const struct iio_event_spec mcp9600_events[] = {
> {
> - .type = IIO_TEMP,
> - .address = MCP9600_HOT_JUNCTION,
> - .info_mask_separate =
> - BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
> + .type = IIO_EV_TYPE_THRESH,
> + .dir = IIO_EV_DIR_RISING,
> + .mask_separate = BIT(IIO_EV_INFO_ENABLE) |
> + BIT(IIO_EV_INFO_VALUE) |
> + BIT(IIO_EV_INFO_HYSTERESIS),
> },
> {
> - .type = IIO_TEMP,
> - .address = MCP9600_COLD_JUNCTION,
> - .channel2 = IIO_MOD_TEMP_AMBIENT,
> - .modified = 1,
> - .info_mask_separate =
> - BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
> + .type = IIO_EV_TYPE_THRESH,
> + .dir = IIO_EV_DIR_FALLING,
> + .mask_separate = BIT(IIO_EV_INFO_ENABLE) |
> + BIT(IIO_EV_INFO_VALUE) |
> + BIT(IIO_EV_INFO_HYSTERESIS),
> },
> };
>
> +#define MCP9600_CHANNELS(hj_num_ev, hj_ev_spec_off, cj_num_ev, cj_ev_spec_off) \
> + { \
> + { \
> + .type = IIO_TEMP, \
> + .address = MCP9600_HOT_JUNCTION, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> + BIT(IIO_CHAN_INFO_SCALE), \
> + .event_spec = &mcp9600_events[hj_ev_spec_off], \
> + .num_event_specs = hj_num_ev, \
> + }, \
> + { \
> + .type = IIO_TEMP, \
> + .address = MCP9600_COLD_JUNCTION, \
> + .channel2 = IIO_MOD_TEMP_AMBIENT, \
> + .modified = 1, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> + BIT(IIO_CHAN_INFO_SCALE), \
> + .event_spec = &mcp9600_events[cj_ev_spec_off], \
> + .num_event_specs = cj_num_ev, \
> + }, \
> + }
> +
> +static const struct iio_chan_spec mcp9600_channels[][2] = {
> + MCP9600_CHANNELS(0, 0, 0, 0), /* Alerts: - - - - */
> + MCP9600_CHANNELS(1, 0, 0, 0), /* Alerts: 1 - - - */
> + MCP9600_CHANNELS(1, 1, 0, 0), /* Alerts: - 2 - - */
> + MCP9600_CHANNELS(2, 0, 0, 0), /* Alerts: 1 2 - - */
> + MCP9600_CHANNELS(0, 0, 1, 0), /* Alerts: - - 3 - */
> + MCP9600_CHANNELS(1, 0, 1, 0), /* Alerts: 1 - 3 - */
> + MCP9600_CHANNELS(1, 1, 1, 0), /* Alerts: - 2 3 - */
> + MCP9600_CHANNELS(2, 0, 1, 0), /* Alerts: 1 2 3 - */
> + MCP9600_CHANNELS(0, 0, 1, 1), /* Alerts: - - - 4 */
> + MCP9600_CHANNELS(1, 0, 1, 1), /* Alerts: 1 - - 4 */
> + MCP9600_CHANNELS(1, 1, 1, 1), /* Alerts: - 2 - 4 */
> + MCP9600_CHANNELS(2, 0, 1, 1), /* Alerts: 1 2 - 4 */
> + MCP9600_CHANNELS(0, 0, 2, 0), /* Alerts: - - 3 4 */
> + MCP9600_CHANNELS(1, 0, 2, 0), /* Alerts: 1 - 3 4 */
> + MCP9600_CHANNELS(1, 1, 2, 0), /* Alerts: - 2 3 4 */
> + MCP9600_CHANNELS(2, 0, 2, 0), /* Alerts: 1 2 3 4 */
> +};