This helps prevent mistakes like freeing out of order in cleanup functions
and forgetting to free on error paths.
Signed-off-by: Andrew Davis <[email protected]>
---
drivers/remoteproc/da8xx_remoteproc.c | 29 +++++++++++++--------------
1 file changed, 14 insertions(+), 15 deletions(-)
diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index c8b7576937733..1ce91516fc6e5 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -233,6 +233,13 @@ static int da8xx_rproc_get_internal_memories(struct platform_device *pdev,
return 0;
}
+static void da8xx_rproc_mem_release(void *data)
+{
+ struct device *dev = data;
+
+ of_reserved_mem_device_release(dev);
+}
+
static int da8xx_rproc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -293,14 +300,13 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
ret);
return ret;
}
+ devm_add_action_or_reset(&pdev->dev, da8xx_rproc_mem_release, &pdev->dev);
}
rproc = devm_rproc_alloc(dev, "dsp", &da8xx_rproc_ops, da8xx_fw_name,
sizeof(*drproc));
- if (!rproc) {
- ret = -ENOMEM;
- goto free_mem;
- }
+ if (!rproc)
+ return -ENOMEM;
/* error recovery is not supported at present */
rproc->recovery_disabled = true;
@@ -313,7 +319,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
ret = da8xx_rproc_get_internal_memories(pdev, drproc);
if (ret)
- goto free_mem;
+ return ret;
platform_set_drvdata(pdev, rproc);
@@ -323,7 +329,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
rproc);
if (ret) {
dev_err(dev, "devm_request_threaded_irq error: %d\n", ret);
- goto free_mem;
+ return ret;
}
/*
@@ -333,7 +339,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
*/
ret = reset_control_assert(dsp_reset);
if (ret)
- goto free_mem;
+ return ret;
drproc->chipsig = chipsig;
drproc->bootreg = bootreg;
@@ -344,15 +350,10 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
ret = rproc_add(rproc);
if (ret) {
dev_err(dev, "rproc_add failed: %d\n", ret);
- goto free_mem;
+ return ret;
}
return 0;
-
-free_mem:
- if (dev->of_node)
- of_reserved_mem_device_release(dev);
- return ret;
}
static void da8xx_rproc_remove(struct platform_device *pdev)
@@ -369,8 +370,6 @@ static void da8xx_rproc_remove(struct platform_device *pdev)
disable_irq(drproc->irq);
rproc_del(rproc);
- if (dev->of_node)
- of_reserved_mem_device_release(dev);
}
static const struct of_device_id davinci_rproc_of_match[] __maybe_unused = {
--
2.39.2
Hi Andrew,
On Mon, Jun 10, 2024 at 10:17:20AM -0500, Andrew Davis wrote:
> This helps prevent mistakes like freeing out of order in cleanup functions
> and forgetting to free on error paths.
>
> Signed-off-by: Andrew Davis <[email protected]>
> ---
> drivers/remoteproc/da8xx_remoteproc.c | 29 +++++++++++++--------------
> 1 file changed, 14 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
> index c8b7576937733..1ce91516fc6e5 100644
> --- a/drivers/remoteproc/da8xx_remoteproc.c
> +++ b/drivers/remoteproc/da8xx_remoteproc.c
> @@ -233,6 +233,13 @@ static int da8xx_rproc_get_internal_memories(struct platform_device *pdev,
> return 0;
> }
>
> +static void da8xx_rproc_mem_release(void *data)
> +{
> + struct device *dev = data;
> +
> + of_reserved_mem_device_release(dev);
> +}
> +
> static int da8xx_rproc_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -293,14 +300,13 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
> ret);
> return ret;
> }
> + devm_add_action_or_reset(&pdev->dev, da8xx_rproc_mem_release, &pdev->dev);
> }
>
> rproc = devm_rproc_alloc(dev, "dsp", &da8xx_rproc_ops, da8xx_fw_name,
> sizeof(*drproc));
> - if (!rproc) {
> - ret = -ENOMEM;
> - goto free_mem;
> - }
> + if (!rproc)
> + return -ENOMEM;
>
> /* error recovery is not supported at present */
> rproc->recovery_disabled = true;
> @@ -313,7 +319,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
>
> ret = da8xx_rproc_get_internal_memories(pdev, drproc);
> if (ret)
> - goto free_mem;
> + return ret;
>
> platform_set_drvdata(pdev, rproc);
>
> @@ -323,7 +329,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
> rproc);
> if (ret) {
> dev_err(dev, "devm_request_threaded_irq error: %d\n", ret);
> - goto free_mem;
> + return ret;
> }
>
> /*
> @@ -333,7 +339,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
> */
> ret = reset_control_assert(dsp_reset);
> if (ret)
> - goto free_mem;
> + return ret;
>
> drproc->chipsig = chipsig;
> drproc->bootreg = bootreg;
> @@ -344,15 +350,10 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
> ret = rproc_add(rproc);
> if (ret) {
> dev_err(dev, "rproc_add failed: %d\n", ret);
> - goto free_mem;
> + return ret;
> }
>
> return 0;
> -
> -free_mem:
> - if (dev->of_node)
> - of_reserved_mem_device_release(dev);
> - return ret;
> }
>
> static void da8xx_rproc_remove(struct platform_device *pdev)
> @@ -369,8 +370,6 @@ static void da8xx_rproc_remove(struct platform_device *pdev)
> disable_irq(drproc->irq);
>
> rproc_del(rproc);
> - if (dev->of_node)
> - of_reserved_mem_device_release(dev);
This patch gives me the following compilation warning:
CC kernel/module/main.o
CC drivers/remoteproc/da8xx_remoteproc.o
AR drivers/base/firmware_loader/built-in.a
AR drivers/base/built-in.a
remoteproc/kernel/drivers/remoteproc/da8xx_remoteproc.c: In function ‘da8xx_rproc_remove’:
remoteproc/kernel/drivers/remoteproc/da8xx_remoteproc.c:363:24: warning: unused variable ‘dev’ [-Wunused-variable]
363 | struct device *dev = &pdev->dev;
| ^~~
AR drivers/remoteproc/built-in.a
which is then fixed in the following patch with the introduction of
devm_rproc_add(). I suggest doing the opposite, i.e introduce devm_rproc_add()
and then get rid of da8xx_rproc_remove() by introducing
da8xx_rproc_mem_release().
No need to resend the omap set, I have them.
Thanks,
Mathieu
> }
>
> static const struct of_device_id davinci_rproc_of_match[] __maybe_unused = {
> --
> 2.39.2
>