From: Bartosz Golaszewski <[email protected]>
With the introduction of PCI device power control drivers that will be
able to trigger the port rescan when probing, we need to hold the rescan
mutex during the initial pci_host_probe() too or the two could get in
each other's way.
Tested-by: Amit Pundir <[email protected]>
Tested-by: Neil Armstrong <[email protected]> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <[email protected]> # OnePlus 8T
Acked-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
---
drivers/pci/probe.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index bfeeaf2d1fa9..b14b9876c030 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -3083,7 +3083,9 @@ int pci_host_probe(struct pci_host_bridge *bridge)
struct pci_bus *bus, *child;
int ret;
+ pci_lock_rescan_remove();
ret = pci_scan_root_bus_bridge(bridge);
+ pci_unlock_rescan_remove();
if (ret < 0) {
dev_err(bridge->dev.parent, "Scanning root bridge failed");
return ret;
--
2.40.1