The SK-AM64 board has two TMP100 temperature sensors, add these here.
Signed-off-by: Andrew Davis <[email protected]>
---
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 5b028b3a3192f..44ecbcf1c8447 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -430,6 +430,18 @@ exp2: gpio@60 {
#gpio-cells = <2>;
gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8";
};
+
+ /* SoC power supply temperature */
+ tmp100@48 {
+ compatible = "ti,tmp100";
+ reg = <0x48>;
+ };
+
+ /* DDR power supply temperature */
+ tmp100@49 {
+ compatible = "ti,tmp100";
+ reg = <0x49>;
+ };
};
/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
--
2.39.2