Add thermal subfix for thermal node name to fix DTB_CHECK warning:
thermal-zones: '...' do not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$'
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 4 ++--
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 10 +++++-----
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 4 ++--
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 14 +++++++-------
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 14 +++++++-------
5 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 6552d404d1310..4685f1cb5d5ff 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -155,7 +155,7 @@ its: msi-controller@6020000 {
};
thermal-zones {
- ddr-controller {
+ ddr-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 0>;
@@ -175,7 +175,7 @@ ddr-ctrler-crit {
};
};
- core-cluster {
+ core-cluster-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index a4a476b04ebe3..45b5d1b16e34e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -154,7 +154,7 @@ reboot {
};
thermal-zones {
- ddr-controller {
+ ddr-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 0>;
@@ -174,7 +174,7 @@ ddr-ctrler-crit {
};
};
- serdes {
+ serdes-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 1>;
@@ -194,7 +194,7 @@ serdes-crit {
};
};
- fman {
+ fman-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 2>;
@@ -214,7 +214,7 @@ fman-crit {
};
};
- core-cluster {
+ core-cluster-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 3>;
@@ -245,7 +245,7 @@ map0 {
};
};
- sec {
+ sec-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 4>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 604bf88d70b3a..a16590032a72c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -131,7 +131,7 @@ its: msi-controller@6020000 {
};
thermal-zones {
- core-cluster {
+ core-cluster-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 0>;
@@ -166,7 +166,7 @@ map0 {
};
};
- soc {
+ soc-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 9064e6de7d107..0164cc646904a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -80,7 +80,7 @@ reboot {
};
thermal-zones {
- ddr-controller1 {
+ ddr-ctrl1-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 1>;
@@ -94,7 +94,7 @@ ddr-ctrler1-crit {
};
};
- ddr-controller2 {
+ ddr-ctrl2-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 2>;
@@ -108,7 +108,7 @@ ddr-ctrler2-crit {
};
};
- ddr-controller3 {
+ ddr-ctrl3-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 3>;
@@ -122,7 +122,7 @@ ddr-ctrler3-crit {
};
};
- core-cluster1 {
+ core-cluster1-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 4>;
@@ -151,7 +151,7 @@ map0 {
};
};
- core-cluster2 {
+ core-cluster2-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 5>;
@@ -180,7 +180,7 @@ map0 {
};
};
- core-cluster3 {
+ core-cluster3-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 6>;
@@ -209,7 +209,7 @@ map0 {
};
};
- core-cluster4 {
+ core-cluster4-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 7>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 7dc98cb0ffc93..bb4e4f7803ce7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -449,7 +449,7 @@ sysclk: sysclk {
};
thermal-zones {
- cluster6-7 {
+ cluster6-7-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 0>;
@@ -492,7 +492,7 @@ map0 {
};
};
- ddr-cluster5 {
+ ddr-cluster5-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 1>;
@@ -512,7 +512,7 @@ ddr-cluster5-crit {
};
};
- wriop {
+ wriop-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 2>;
@@ -532,7 +532,7 @@ wriop-crit {
};
};
- dce-qbman-hsio2 {
+ dce-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 3>;
@@ -552,7 +552,7 @@ dce-qbman-crit {
};
};
- ccn-dpaa-tbu {
+ ccn-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 4>;
@@ -572,7 +572,7 @@ ccn-dpaa-crit {
};
};
- cluster4-hsio3 {
+ cluster4-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 5>;
@@ -592,7 +592,7 @@ clust4-hsio3-crit {
};
};
- cluster2-3 {
+ cluster2-3-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 6>;
--
2.34.1