Label the spi nor as serial_flash. This allows us to disable the
flash with an overlay common to all am6xx-phycore-som boards.
Signed-off-by: Nathan Morrisson <[email protected]>
---
v3: No change
v2: No change
arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
index 125e507966fb..ca0bbf21f7fe 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
@@ -296,7 +296,7 @@ &ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&ospi0_pins_default>;
- flash@0 {
+ serial_flash: flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
--
2.25.1