This patch series adds 10G-QXGMII mode for PHY driver. The patch
series is split from the QCA8084 PHY driver patch series below.
https://lore.kernel.org/all/[email protected]/
Per Andrew Lunn’s advice, submitting this patch series for acceptance
as they already include the necessary 'Reviewed-by:' tags. This way,
they need not wait for QCA8084 series patches to conclude review.
Changes in v2:
* remove PHY_INTERFACE_MODE_10G_QXGMII from workaround of
validation in the phylink_validate_phy. 10G_QXGMII will
be set into phy->possible_interfaces in its .config_init
method of PHY driver that supports it.
Vladimir Oltean (2):
net: phy: introduce core support for phy-mode = "10g-qxgmii"
dt-bindings: net: ethernet-controller: add 10g-qxgmii mode
.../devicetree/bindings/net/ethernet-controller.yaml | 1 +
Documentation/networking/phy.rst | 6 ++++++
drivers/net/phy/phy-core.c | 1 +
drivers/net/phy/phylink.c | 9 ++++++++-
include/linux/phy.h | 4 ++++
include/linux/phylink.h | 1 +
6 files changed, 21 insertions(+), 1 deletion(-)
base-commit: 934c29999b57b835d65442da6f741d5e27f3b584
--
2.34.1
From: Vladimir Oltean <[email protected]>
Add the new interface mode 10g-qxgmii, which is similar to
usxgmii but extend to 4 channels to support maximum of 4
ports with the link speed 10M/100M/1G/2.5G.
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Luo Jie <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
---
Documentation/devicetree/bindings/net/ethernet-controller.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index b2785b03139f..45819b235800 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -103,6 +103,7 @@ properties:
- usxgmii
- 10gbase-r
- 25gbase-r
+ - 10g-qxgmii
phy-mode:
$ref: "#/properties/phy-connection-type"
--
2.34.1