2024-02-23 09:17:15

by Balakrishnan Sambath

Subject: [PATCH v2 1/2] ARM: dts: microchip: sama7g5: add sama7g5 compatible

Add sama7g5 flexcom specific compatible in DT with fallbacks.

Signed-off-by: Balakrishnan Sambath <[email protected]>
---
arch/arm/boot/dts/microchip/sama7g5.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
index 269e0a3ca269..6496a4ca376f 100644
--- a/arch/arm/boot/dts/microchip/sama7g5.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
@@ -698,7 +698,7 @@ sha: crypto@e1814000 {
};

flx0: flexcom@e1818000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe1818000 0x200>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
#address-cells = <1>;
@@ -723,7 +723,7 @@ uart0: serial@200 {
};

flx1: flexcom@e181c000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe181c000 0x200>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
#address-cells = <1>;
@@ -747,7 +747,7 @@ i2c1: i2c@600 {
};

flx3: flexcom@e1824000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe1824000 0x200>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
#address-cells = <1>;
@@ -791,7 +791,7 @@ tdes: crypto@e2014000 {
};

flx4: flexcom@e2018000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe2018000 0x200>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
#address-cells = <1>;
@@ -817,7 +817,7 @@ uart4: serial@200 {
};

flx7: flexcom@e2024000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe2024000 0x200>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
#address-cells = <1>;
@@ -911,7 +911,7 @@ tcb0: timer@e2814000 {
};

flx8: flexcom@e2818000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe2818000 0x200>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
#address-cells = <1>;
@@ -935,7 +935,7 @@ i2c8: i2c@600 {
};

flx9: flexcom@e281c000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe281c000 0x200>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
#address-cells = <1>;
@@ -959,7 +959,7 @@ i2c9: i2c@600 {
};

flx11: flexcom@e2824000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe2824000 0x200>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
#address-cells = <1>;

--
2.25.1

2024-02-23 12:56:20

by claudiu beznea

Subject: Re: [PATCH v2 1/2] ARM: dts: microchip: sama7g5: add sama7g5 compatible

Hi, Balakrishnan,

On 23.02.2024 11:16, Balakrishnan Sambath wrote:
> Add sama7g5 flexcom specific compatible in DT with fallbacks.

Can you also take care of lan966x and sam9x60?

Thank you,
Claudiu Beznea

>
> Signed-off-by: Balakrishnan Sambath <[email protected]>
> ---
> arch/arm/boot/dts/microchip/sama7g5.dtsi | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
> index 269e0a3ca269..6496a4ca376f 100644
> --- a/arch/arm/boot/dts/microchip/sama7g5.dtsi
> +++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
> @@ -698,7 +698,7 @@ sha: crypto@e1814000 {
> };
>
> flx0: flexcom@e1818000 {
> - compatible = "atmel,sama5d2-flexcom";
> + compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
> reg = <0xe1818000 0x200>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
> #address-cells = <1>;
> @@ -723,7 +723,7 @@ uart0: serial@200 {
> };
>
> flx1: flexcom@e181c000 {
> - compatible = "atmel,sama5d2-flexcom";
> + compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
> reg = <0xe181c000 0x200>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
> #address-cells = <1>;
> @@ -747,7 +747,7 @@ i2c1: i2c@600 {
> };
>
> flx3: flexcom@e1824000 {
> - compatible = "atmel,sama5d2-flexcom";
> + compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
> reg = <0xe1824000 0x200>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
> #address-cells = <1>;
> @@ -791,7 +791,7 @@ tdes: crypto@e2014000 {
> };
>
> flx4: flexcom@e2018000 {
> - compatible = "atmel,sama5d2-flexcom";
> + compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
> reg = <0xe2018000 0x200>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
> #address-cells = <1>;
> @@ -817,7 +817,7 @@ uart4: serial@200 {
> };
>
> flx7: flexcom@e2024000 {
> - compatible = "atmel,sama5d2-flexcom";
> + compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
> reg = <0xe2024000 0x200>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
> #address-cells = <1>;
> @@ -911,7 +911,7 @@ tcb0: timer@e2814000 {
> };
>
> flx8: flexcom@e2818000 {
> - compatible = "atmel,sama5d2-flexcom";
> + compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
> reg = <0xe2818000 0x200>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
> #address-cells = <1>;
> @@ -935,7 +935,7 @@ i2c8: i2c@600 {
> };
>
> flx9: flexcom@e281c000 {
> - compatible = "atmel,sama5d2-flexcom";
> + compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
> reg = <0xe281c000 0x200>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
> #address-cells = <1>;
> @@ -959,7 +959,7 @@ i2c9: i2c@600 {
> };
>
> flx11: flexcom@e2824000 {
> - compatible = "atmel,sama5d2-flexcom";
> + compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
> reg = <0xe2824000 0x200>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
> #address-cells = <1>;
>

2024-02-23 20:24:21

by claudiu beznea

Subject: Re: [PATCH v2 1/2] ARM: dts: microchip: sama7g5: add sama7g5 compatible

On 23.02.2024 11:16, Balakrishnan Sambath wrote:
> Add sama7g5 flexcom specific compatible in DT with fallbacks.
>
> Signed-off-by: Balakrishnan Sambath <[email protected]>

Applied to at91-dt, thanks!