This patch series adds support for the NXP PMIC PF3001. This
based mostly on the patches by Robin Gong and Mauro Salvini from
here [1].
[1] - https://community.nxp.com/docs/DOC-331899
Stefan Wahren (2):
dt-bindings: pfuze100: add pfuze3001 support
regulator: pfuze100: add pfuze3001 support
.../devicetree/bindings/regulator/pfuze100.txt | 77 ++++++++++++++++++++-
drivers/regulator/Kconfig | 4 +-
drivers/regulator/pfuze100-regulator.c | 78 ++++++++++++++++++++--
include/linux/regulator/pfuze100.h | 11 +++
4 files changed, 160 insertions(+), 10 deletions(-)
--
2.7.4
This patch extends binding according to support the pfuze3001 chip.
Signed-off-by: Stefan Wahren <[email protected]>
---
.../devicetree/bindings/regulator/pfuze100.txt | 77 +++++++++++++++++++++-
1 file changed, 76 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index f0ada3b..672c939 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -1,7 +1,7 @@
PFUZE100 family of regulators
Required properties:
-- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000"
+- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000", "fsl,pfuze3001"
- reg: I2C slave address
Required child node:
@@ -16,6 +16,8 @@ Required child node:
sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin
--PFUZE3000
sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4
+ --PFUZE3001
+ sw1,sw2,sw3,vsnvs,vldo1,vldo2,vccsd,v33,vldo3,vldo4
Each regulator is defined using the standard binding for regulators.
@@ -303,3 +305,76 @@ Example 3: PFUZE3000
};
};
};
+
+Example 4: PFUZE 3001
+
+ pfuze3001: pmic@8 {
+ compatible = "fsl,pfuze3001";
+ reg = <0x08>;
+
+ regulators {
+ sw1_reg: sw1 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
--
2.7.4
This extends the pfuze100 driver with pfuze3001 support.
Latest datasheet:
https://www.nxp.com/docs/en/data-sheet/PF3001.pdf
Signed-off-by: Robin Gong <[email protected]>
Signed-off-by: Stefan Wahren <[email protected]>
---
drivers/regulator/Kconfig | 4 +-
drivers/regulator/pfuze100-regulator.c | 78 +++++++++++++++++++++++++++++++---
include/linux/regulator/pfuze100.h | 11 +++++
3 files changed, 84 insertions(+), 9 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 5dbccf5..2964eaea 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -633,12 +633,12 @@ config REGULATOR_PCF50633
on PCF50633
config REGULATOR_PFUZE100
- tristate "Freescale PFUZE100/200/3000 regulator driver"
+ tristate "Freescale PFUZE100/200/3000/3001 regulator driver"
depends on I2C
select REGMAP_I2C
help
Say y here to support the regulators found on the Freescale
- PFUZE100/200/3000 PMIC.
+ PFUZE100/200/3000/3001 PMIC.
config REGULATOR_PV88060
tristate "Powerventure Semiconductor PV88060 regulator"
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 8d9dbcc..32f9af7 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -44,7 +44,7 @@
#define PFUZE100_VGEN5VOL 0x70
#define PFUZE100_VGEN6VOL 0x71
-enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3 };
+enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3, PFUZE3001 = 0x31, };
struct pfuze_regulator {
struct regulator_desc desc;
@@ -92,6 +92,7 @@ static const struct i2c_device_id pfuze_device_id[] = {
{.name = "pfuze100", .driver_data = PFUZE100},
{.name = "pfuze200", .driver_data = PFUZE200},
{.name = "pfuze3000", .driver_data = PFUZE3000},
+ {.name = "pfuze3001", .driver_data = PFUZE3001},
{ }
};
MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
@@ -100,6 +101,7 @@ static const struct of_device_id pfuze_dt_ids[] = {
{ .compatible = "fsl,pfuze100", .data = (void *)PFUZE100},
{ .compatible = "fsl,pfuze200", .data = (void *)PFUZE200},
{ .compatible = "fsl,pfuze3000", .data = (void *)PFUZE3000},
+ { .compatible = "fsl,pfuze3001", .data = (void *)PFUZE3001},
{ }
};
MODULE_DEVICE_TABLE(of, pfuze_dt_ids);
@@ -108,10 +110,28 @@ static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
+ bool reg_has_ramp_delay;
unsigned int ramp_bits;
int ret;
- if (id < PFUZE100_SWBST) {
+ switch (pfuze100->chip_id) {
+ case PFUZE3001:
+ /* no dynamic voltage scaling for PF3001 */
+ reg_has_ramp_delay = false;
+ break;
+ case PFUZE3000:
+ reg_has_ramp_delay = (id < PFUZE3000_SWBST);
+ break;
+ case PFUZE200:
+ reg_has_ramp_delay = (id < PFUZE200_SWBST);
+ break;
+ case PFUZE100:
+ default:
+ reg_has_ramp_delay = (id < PFUZE100_SWBST);
+ break;
+ }
+
+ if (reg_has_ramp_delay) {
ramp_delay = 12500 / ramp_delay;
ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
ret = regmap_update_bits(pfuze100->regmap,
@@ -119,8 +139,9 @@ static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
0xc0, ramp_bits << 6);
if (ret < 0)
dev_err(pfuze100->dev, "ramp failed, err %d\n", ret);
- } else
+ } else {
ret = -EACCES;
+ }
return ret;
}
@@ -361,6 +382,19 @@ static struct pfuze_regulator pfuze3000_regulators[] = {
PFUZE100_VGEN_REG(PFUZE3000, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
};
+static struct pfuze_regulator pfuze3001_regulators[] = {
+ PFUZE100_SWB_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
+ PFUZE100_SWB_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
+ PFUZE3000_SW3_REG(PFUZE3001, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000),
+ PFUZE100_SWB_REG(PFUZE3001, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
+ PFUZE100_VGEN_REG(PFUZE3001, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000),
+ PFUZE100_VGEN_REG(PFUZE3001, VLDO2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
+ PFUZE3000_VCC_REG(PFUZE3001, VCCSD, PFUZE100_VGEN3VOL, 2850000, 3300000, 150000),
+ PFUZE3000_VCC_REG(PFUZE3001, V33, PFUZE100_VGEN4VOL, 2850000, 3300000, 150000),
+ PFUZE100_VGEN_REG(PFUZE3001, VLDO3, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
+ PFUZE100_VGEN_REG(PFUZE3001, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
+};
+
#ifdef CONFIG_OF
/* PFUZE100 */
static struct of_regulator_match pfuze100_matches[] = {
@@ -418,6 +452,21 @@ static struct of_regulator_match pfuze3000_matches[] = {
{ .name = "vldo4", },
};
+/* PFUZE3001 */
+static struct of_regulator_match pfuze3001_matches[] = {
+
+ { .name = "sw1", },
+ { .name = "sw2", },
+ { .name = "sw3", },
+ { .name = "vsnvs", },
+ { .name = "vldo1", },
+ { .name = "vldo2", },
+ { .name = "vccsd", },
+ { .name = "v33", },
+ { .name = "vldo3", },
+ { .name = "vldo4", },
+};
+
static struct of_regulator_match *pfuze_matches;
static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
@@ -437,6 +486,11 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
}
switch (chip->chip_id) {
+ case PFUZE3001:
+ pfuze_matches = pfuze3001_matches;
+ ret = of_regulator_match(dev, parent, pfuze3001_matches,
+ ARRAY_SIZE(pfuze3001_matches));
+ break;
case PFUZE3000:
pfuze_matches = pfuze3000_matches;
ret = of_regulator_match(dev, parent, pfuze3000_matches,
@@ -508,7 +562,8 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip)
*/
dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8");
} else if ((value & 0x0f) != pfuze_chip->chip_id &&
- (value & 0xf0) >> 4 != pfuze_chip->chip_id) {
+ (value & 0xf0) >> 4 != pfuze_chip->chip_id &&
+ (value != pfuze_chip->chip_id)) {
/* device id NOT match with your setting */
dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
return -ENODEV;
@@ -588,6 +643,13 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
/* use the right regulators after identify the right device */
switch (pfuze_chip->chip_id) {
+ case PFUZE3001:
+ pfuze_chip->pfuze_regulators = pfuze3001_regulators;
+ regulator_num = ARRAY_SIZE(pfuze3001_regulators);
+ sw_check_start = PFUZE3001_SW2;
+ sw_check_end = PFUZE3001_SW2;
+ sw_hi = 1 << 3;
+ break;
case PFUZE3000:
pfuze_chip->pfuze_regulators = pfuze3000_regulators;
regulator_num = ARRAY_SIZE(pfuze3000_regulators);
@@ -611,7 +673,8 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
}
dev_info(&client->dev, "pfuze%s found.\n",
(pfuze_chip->chip_id == PFUZE100) ? "100" :
- ((pfuze_chip->chip_id == PFUZE200) ? "200" : "3000"));
+ (((pfuze_chip->chip_id == PFUZE200) ? "200" :
+ ((pfuze_chip->chip_id == PFUZE3000) ? "3000" : "3001"))));
memcpy(pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators,
sizeof(pfuze_chip->regulator_descs));
@@ -636,7 +699,8 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
if (i >= sw_check_start && i <= sw_check_end) {
regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val);
if (val & sw_hi) {
- if (pfuze_chip->chip_id == PFUZE3000) {
+ if (pfuze_chip->chip_id == PFUZE3000 ||
+ pfuze_chip->chip_id == PFUZE3001) {
desc->volt_table = pfuze3000_sw2hi;
desc->n_voltages = ARRAY_SIZE(pfuze3000_sw2hi);
} else {
@@ -675,5 +739,5 @@ static struct i2c_driver pfuze_driver = {
module_i2c_driver(pfuze_driver);
MODULE_AUTHOR("Robin Gong <[email protected]>");
-MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/200/3000 PMIC");
+MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/200/3000/3001 PMIC");
MODULE_LICENSE("GPL v2");
diff --git a/include/linux/regulator/pfuze100.h b/include/linux/regulator/pfuze100.h
index e0ccf46..cb5aecd 100644
--- a/include/linux/regulator/pfuze100.h
+++ b/include/linux/regulator/pfuze100.h
@@ -64,6 +64,17 @@
#define PFUZE3000_VLDO3 11
#define PFUZE3000_VLDO4 12
+#define PFUZE3001_SW1 0
+#define PFUZE3001_SW2 1
+#define PFUZE3001_SW3 2
+#define PFUZE3001_VSNVS 3
+#define PFUZE3001_VLDO1 4
+#define PFUZE3001_VLDO2 5
+#define PFUZE3001_VCCSD 6
+#define PFUZE3001_V33 7
+#define PFUZE3001_VLDO3 8
+#define PFUZE3001_VLDO4 9
+
struct regulator_init_data;
struct pfuze_regulator_platform_data {
--
2.7.4
Hi Stefan,
On Fri, Jun 15, 2018 at 8:44 AM, Stefan Wahren <[email protected]> wrote:
> This patch series adds support for the NXP PMIC PF3001. This
> based mostly on the patches by Robin Gong and Mauro Salvini from
> here [1].
>
> [1] - https://community.nxp.com/docs/DOC-331899
>
> Stefan Wahren (2):
> dt-bindings: pfuze100: add pfuze3001 support
> regulator: pfuze100: add pfuze3001 support
This series looks good.
Any particular reason for marking it as RFC?
Thanks
Hi Fabio,
> Fabio Estevam <[email protected]> hat am 16. Juni 2018 um 20:40 geschrieben:
>
>
> Hi Stefan,
>
> On Fri, Jun 15, 2018 at 8:44 AM, Stefan Wahren <[email protected]> wrote:
> > This patch series adds support for the NXP PMIC PF3001. This
> > based mostly on the patches by Robin Gong and Mauro Salvini from
> > here [1].
> >
> > [1] - https://community.nxp.com/docs/DOC-331899
> >
> > Stefan Wahren (2):
> > dt-bindings: pfuze100: add pfuze3001 support
> > regulator: pfuze100: add pfuze3001 support
>
> This series looks good.
>
> Any particular reason for marking it as RFC?
since most of the changes based on Robin's and Mauro's work.
>
> Thanks
The patch
regulator: pfuze100: add pfuze3001 support
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 5986f83efab0435918e58416f89a5d82adc11f5d Mon Sep 17 00:00:00 2001
From: Stefan Wahren <[email protected]>
Date: Fri, 15 Jun 2018 13:44:52 +0200
Subject: [PATCH] regulator: pfuze100: add pfuze3001 support
This patch extends binding according to support the pfuze3001 chip.
Signed-off-by: Stefan Wahren <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
.../bindings/regulator/pfuze100.txt | 77 ++++++++++++++++++-
1 file changed, 76 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index f0ada3b14d70..672c939045ff 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -1,7 +1,7 @@
PFUZE100 family of regulators
Required properties:
-- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000"
+- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000", "fsl,pfuze3001"
- reg: I2C slave address
Required child node:
@@ -16,6 +16,8 @@ Required child node:
sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin
--PFUZE3000
sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4
+ --PFUZE3001
+ sw1,sw2,sw3,vsnvs,vldo1,vldo2,vccsd,v33,vldo3,vldo4
Each regulator is defined using the standard binding for regulators.
@@ -303,3 +305,76 @@ Example 3: PFUZE3000
};
};
};
+
+Example 4: PFUZE 3001
+
+ pfuze3001: pmic@8 {
+ compatible = "fsl,pfuze3001";
+ reg = <0x08>;
+
+ regulators {
+ sw1_reg: sw1 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
--
2.17.1
The patch
regulator: pfuze100: add pfuze3001 support
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 297101ab85841319aac2c7843ca755d650c1964f Mon Sep 17 00:00:00 2001
From: Stefan Wahren <[email protected]>
Date: Fri, 15 Jun 2018 13:44:53 +0200
Subject: [PATCH] regulator: pfuze100: add pfuze3001 support
This extends the pfuze100 driver with pfuze3001 support.
Latest datasheet:
https://www.nxp.com/docs/en/data-sheet/PF3001.pdf
Signed-off-by: Robin Gong <[email protected]>
Signed-off-by: Stefan Wahren <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
drivers/regulator/Kconfig | 4 +-
drivers/regulator/pfuze100-regulator.c | 78 +++++++++++++++++++++++---
include/linux/regulator/pfuze100.h | 11 ++++
3 files changed, 84 insertions(+), 9 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 5dbccf5f3037..2964eaea94c0 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -633,12 +633,12 @@ config REGULATOR_PCF50633
on PCF50633
config REGULATOR_PFUZE100
- tristate "Freescale PFUZE100/200/3000 regulator driver"
+ tristate "Freescale PFUZE100/200/3000/3001 regulator driver"
depends on I2C
select REGMAP_I2C
help
Say y here to support the regulators found on the Freescale
- PFUZE100/200/3000 PMIC.
+ PFUZE100/200/3000/3001 PMIC.
config REGULATOR_PV88060
tristate "Powerventure Semiconductor PV88060 regulator"
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 8d9dbcc775ea..32f9af7f87c4 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -44,7 +44,7 @@
#define PFUZE100_VGEN5VOL 0x70
#define PFUZE100_VGEN6VOL 0x71
-enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3 };
+enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3, PFUZE3001 = 0x31, };
struct pfuze_regulator {
struct regulator_desc desc;
@@ -92,6 +92,7 @@ static const struct i2c_device_id pfuze_device_id[] = {
{.name = "pfuze100", .driver_data = PFUZE100},
{.name = "pfuze200", .driver_data = PFUZE200},
{.name = "pfuze3000", .driver_data = PFUZE3000},
+ {.name = "pfuze3001", .driver_data = PFUZE3001},
{ }
};
MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
@@ -100,6 +101,7 @@ static const struct of_device_id pfuze_dt_ids[] = {
{ .compatible = "fsl,pfuze100", .data = (void *)PFUZE100},
{ .compatible = "fsl,pfuze200", .data = (void *)PFUZE200},
{ .compatible = "fsl,pfuze3000", .data = (void *)PFUZE3000},
+ { .compatible = "fsl,pfuze3001", .data = (void *)PFUZE3001},
{ }
};
MODULE_DEVICE_TABLE(of, pfuze_dt_ids);
@@ -108,10 +110,28 @@ static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
+ bool reg_has_ramp_delay;
unsigned int ramp_bits;
int ret;
- if (id < PFUZE100_SWBST) {
+ switch (pfuze100->chip_id) {
+ case PFUZE3001:
+ /* no dynamic voltage scaling for PF3001 */
+ reg_has_ramp_delay = false;
+ break;
+ case PFUZE3000:
+ reg_has_ramp_delay = (id < PFUZE3000_SWBST);
+ break;
+ case PFUZE200:
+ reg_has_ramp_delay = (id < PFUZE200_SWBST);
+ break;
+ case PFUZE100:
+ default:
+ reg_has_ramp_delay = (id < PFUZE100_SWBST);
+ break;
+ }
+
+ if (reg_has_ramp_delay) {
ramp_delay = 12500 / ramp_delay;
ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
ret = regmap_update_bits(pfuze100->regmap,
@@ -119,8 +139,9 @@ static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
0xc0, ramp_bits << 6);
if (ret < 0)
dev_err(pfuze100->dev, "ramp failed, err %d\n", ret);
- } else
+ } else {
ret = -EACCES;
+ }
return ret;
}
@@ -361,6 +382,19 @@ static struct pfuze_regulator pfuze3000_regulators[] = {
PFUZE100_VGEN_REG(PFUZE3000, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
};
+static struct pfuze_regulator pfuze3001_regulators[] = {
+ PFUZE100_SWB_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
+ PFUZE100_SWB_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
+ PFUZE3000_SW3_REG(PFUZE3001, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000),
+ PFUZE100_SWB_REG(PFUZE3001, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
+ PFUZE100_VGEN_REG(PFUZE3001, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000),
+ PFUZE100_VGEN_REG(PFUZE3001, VLDO2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
+ PFUZE3000_VCC_REG(PFUZE3001, VCCSD, PFUZE100_VGEN3VOL, 2850000, 3300000, 150000),
+ PFUZE3000_VCC_REG(PFUZE3001, V33, PFUZE100_VGEN4VOL, 2850000, 3300000, 150000),
+ PFUZE100_VGEN_REG(PFUZE3001, VLDO3, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
+ PFUZE100_VGEN_REG(PFUZE3001, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
+};
+
#ifdef CONFIG_OF
/* PFUZE100 */
static struct of_regulator_match pfuze100_matches[] = {
@@ -418,6 +452,21 @@ static struct of_regulator_match pfuze3000_matches[] = {
{ .name = "vldo4", },
};
+/* PFUZE3001 */
+static struct of_regulator_match pfuze3001_matches[] = {
+
+ { .name = "sw1", },
+ { .name = "sw2", },
+ { .name = "sw3", },
+ { .name = "vsnvs", },
+ { .name = "vldo1", },
+ { .name = "vldo2", },
+ { .name = "vccsd", },
+ { .name = "v33", },
+ { .name = "vldo3", },
+ { .name = "vldo4", },
+};
+
static struct of_regulator_match *pfuze_matches;
static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
@@ -437,6 +486,11 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
}
switch (chip->chip_id) {
+ case PFUZE3001:
+ pfuze_matches = pfuze3001_matches;
+ ret = of_regulator_match(dev, parent, pfuze3001_matches,
+ ARRAY_SIZE(pfuze3001_matches));
+ break;
case PFUZE3000:
pfuze_matches = pfuze3000_matches;
ret = of_regulator_match(dev, parent, pfuze3000_matches,
@@ -508,7 +562,8 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip)
*/
dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8");
} else if ((value & 0x0f) != pfuze_chip->chip_id &&
- (value & 0xf0) >> 4 != pfuze_chip->chip_id) {
+ (value & 0xf0) >> 4 != pfuze_chip->chip_id &&
+ (value != pfuze_chip->chip_id)) {
/* device id NOT match with your setting */
dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
return -ENODEV;
@@ -588,6 +643,13 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
/* use the right regulators after identify the right device */
switch (pfuze_chip->chip_id) {
+ case PFUZE3001:
+ pfuze_chip->pfuze_regulators = pfuze3001_regulators;
+ regulator_num = ARRAY_SIZE(pfuze3001_regulators);
+ sw_check_start = PFUZE3001_SW2;
+ sw_check_end = PFUZE3001_SW2;
+ sw_hi = 1 << 3;
+ break;
case PFUZE3000:
pfuze_chip->pfuze_regulators = pfuze3000_regulators;
regulator_num = ARRAY_SIZE(pfuze3000_regulators);
@@ -611,7 +673,8 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
}
dev_info(&client->dev, "pfuze%s found.\n",
(pfuze_chip->chip_id == PFUZE100) ? "100" :
- ((pfuze_chip->chip_id == PFUZE200) ? "200" : "3000"));
+ (((pfuze_chip->chip_id == PFUZE200) ? "200" :
+ ((pfuze_chip->chip_id == PFUZE3000) ? "3000" : "3001"))));
memcpy(pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators,
sizeof(pfuze_chip->regulator_descs));
@@ -636,7 +699,8 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
if (i >= sw_check_start && i <= sw_check_end) {
regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val);
if (val & sw_hi) {
- if (pfuze_chip->chip_id == PFUZE3000) {
+ if (pfuze_chip->chip_id == PFUZE3000 ||
+ pfuze_chip->chip_id == PFUZE3001) {
desc->volt_table = pfuze3000_sw2hi;
desc->n_voltages = ARRAY_SIZE(pfuze3000_sw2hi);
} else {
@@ -675,5 +739,5 @@ static struct i2c_driver pfuze_driver = {
module_i2c_driver(pfuze_driver);
MODULE_AUTHOR("Robin Gong <[email protected]>");
-MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/200/3000 PMIC");
+MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/200/3000/3001 PMIC");
MODULE_LICENSE("GPL v2");
diff --git a/include/linux/regulator/pfuze100.h b/include/linux/regulator/pfuze100.h
index e0ccf46f66cf..cb5aecd40f07 100644
--- a/include/linux/regulator/pfuze100.h
+++ b/include/linux/regulator/pfuze100.h
@@ -64,6 +64,17 @@
#define PFUZE3000_VLDO3 11
#define PFUZE3000_VLDO4 12
+#define PFUZE3001_SW1 0
+#define PFUZE3001_SW2 1
+#define PFUZE3001_SW3 2
+#define PFUZE3001_VSNVS 3
+#define PFUZE3001_VLDO1 4
+#define PFUZE3001_VLDO2 5
+#define PFUZE3001_VCCSD 6
+#define PFUZE3001_V33 7
+#define PFUZE3001_VLDO3 8
+#define PFUZE3001_VLDO4 9
+
struct regulator_init_data;
struct pfuze_regulator_platform_data {
--
2.17.1