Dne petek, 06. oktober 2023 ob 11:01:30 CEST je Julian Ribbeck napisal(a):
> Iteaduino Plus A20 is very similar to Iteaduino Plus A10. In fact it
> shares the same breakout board and the Itead Core A20 on top of it, is
> only adapted to support the dual-core A20.
>
> This commits enables the following hardware:
>
> * HDMI Video output
> * USB
> * SATA (untested due to lack of hardware I could attach)
> * Ethernet
> * MMC storage
> * UART
> * USB OTG (untested, because I don't own an USB OTG cable/device)
>
> Signed-off-by: Julian Ribbeck <[email protected]>
> ---
> arch/arm/boot/dts/allwinner/Makefile | 1 +
> .../sun7i-a20-itead-iteaduino-plus.dts | 104 ++++++++++++++++++
> 2 files changed, 105 insertions(+)
> create mode 100644 arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts
>
> diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile
> index eebb5a0c873a..39af5ad94590 100644
> --- a/arch/arm/boot/dts/allwinner/Makefile
> +++ b/arch/arm/boot/dts/allwinner/Makefile
> @@ -124,6 +124,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
> sun7i-a20-haoyu-marsboard.dtb \
> sun7i-a20-hummingbird.dtb \
> sun7i-a20-itead-ibox.dtb \
> + sun7i-a20-itead-iteaduino-plus.dts \
This should be .dtb.
Other than that:
Reviewed-by: Jernej Skrabec <[email protected]>
I'll fix it while applying.
For future reference, please follow proper patch submission procedure:
- each revision should be sent in separate thread
- each new revision should contain changelog, either in cover letter (when
there is more than one patch) or below --- line in each patch
- compatible description patch comes before first usage (I'll invert order
when applying)
Best regards,
Jernej
> sun7i-a20-i12-tvbox.dtb \
> sun7i-a20-icnova-a20-adb4006.dtb \
> sun7i-a20-icnova-swac.dtb \
> diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts
> new file mode 100644
> index 000000000000..c9f9b0275381
> --- /dev/null
> +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts
> @@ -0,0 +1,104 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +
> +/dts-v1/;
> +#include "sun7i-a20.dtsi"
> +#include "sunxi-itead-core-common.dtsi"
> +
> +/ {
> + model = "Itead Iteaduino Plus A20";
> + compatible = "itead,iteaduino-plus-a20", "allwinner,sun7i-a20";
> +
> + hdmi-connector {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con_in: endpoint {
> + remote-endpoint = <&hdmi_out_con>;
> + };
> + };
> + };
> +};
> +
> +&ac_power_supply {
> + status = "okay";
> +};
> +
> +&ahci {
> + target-supply = <®_ahci_5v>;
> + status = "okay";
> +};
> +
> +&axp209 {
> + interrupt-parent = <&nmi_intc>;
> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> +};
> +
> +&battery_power_supply {
> + status = "okay";
> +};
> +
> +&codec {
> + stauts = "okay";
> +};
> +
> +&de {
> + status = "okay";
> +};
> +
> +&emac {
> + pinctrl-names = "default";
> + pinctrl-0 = <&emac_pa_pins>;
> + phy-handle = <&phy1>;
> + status = "okay";
> +};
> +
> +&emac_sram {
> + status = "okay";
> +};
> +
> +&hdmi {
> + status = "okay";
> +};
> +
> +&hdmi_out {
> + hdmi_out_con: endpoint {
> + remote-endpoint = <&hdmi_con_in>;
> + };
> +};
> +
> +&mdio {
> + status = "okay";
> +
> + phy1: ethernet-phy@1 {
> + reg = <1>;
> + };
> +};
> +
> +&mmc0 {
> + vmmc-supply = <®_vcc3v3>;
> + bus-width = <4>;
> + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
> + status = "okay";
> +};
> +
> +&otg_sram {
> + status = "okay";
> +};
> +
> +®_ahci_5v {
> + status = "okay";
> +};
> +
> +®_usb0_vbus {
> + status = "okay";
> +};
> +
> +&usb_otg {
> + status = "okay";
> + dr_mode = "host";
> +};
> +
> +&usbphy {
> + usb0_vbus-supply = <®_usb0_vbus>;
> +};
> --
> 2.42.0
>
>
Dne petek, 13. oktober 2023 ob 21:18:00 CEST je Jernej Škrabec napisal(a):
> Dne petek, 06. oktober 2023 ob 11:01:30 CEST je Julian Ribbeck napisal(a):
> > Iteaduino Plus A20 is very similar to Iteaduino Plus A10. In fact it
> > shares the same breakout board and the Itead Core A20 on top of it, is
> > only adapted to support the dual-core A20.
> >
> > This commits enables the following hardware:
> >
> > * HDMI Video output
> > * USB
> > * SATA (untested due to lack of hardware I could attach)
> > * Ethernet
> > * MMC storage
> > * UART
> > * USB OTG (untested, because I don't own an USB OTG cable/device)
> >
> > Signed-off-by: Julian Ribbeck <[email protected]>
> > ---
> > arch/arm/boot/dts/allwinner/Makefile | 1 +
> > .../sun7i-a20-itead-iteaduino-plus.dts | 104 ++++++++++++++++++
> > 2 files changed, 105 insertions(+)
> > create mode 100644 arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts
> >
> > diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile
> > index eebb5a0c873a..39af5ad94590 100644
> > --- a/arch/arm/boot/dts/allwinner/Makefile
> > +++ b/arch/arm/boot/dts/allwinner/Makefile
> > @@ -124,6 +124,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
> > sun7i-a20-haoyu-marsboard.dtb \
> > sun7i-a20-hummingbird.dtb \
> > sun7i-a20-itead-ibox.dtb \
> > + sun7i-a20-itead-iteaduino-plus.dts \
>
> This should be .dtb.
>
> Other than that:
> Reviewed-by: Jernej Skrabec <[email protected]>
>
> I'll fix it while applying.
>
> For future reference, please follow proper patch submission procedure:
> - each revision should be sent in separate thread
> - each new revision should contain changelog, either in cover letter (when
> there is more than one patch) or below --- line in each patch
> - compatible description patch comes before first usage (I'll invert order
> when applying)
Sorry, I won't apply it as yet. How was this tested if it didn't even built due
to mistake in Makefile?
Best regards,
Jernej
>
> Best regards,
> Jernej
>
> > sun7i-a20-i12-tvbox.dtb \
> > sun7i-a20-icnova-a20-adb4006.dtb \
> > sun7i-a20-icnova-swac.dtb \
> > diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts
> > new file mode 100644
> > index 000000000000..c9f9b0275381
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts
> > @@ -0,0 +1,104 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> > +
> > +/dts-v1/;
> > +#include "sun7i-a20.dtsi"
> > +#include "sunxi-itead-core-common.dtsi"
> > +
> > +/ {
> > + model = "Itead Iteaduino Plus A20";
> > + compatible = "itead,iteaduino-plus-a20", "allwinner,sun7i-a20";
> > +
> > + hdmi-connector {
> > + compatible = "hdmi-connector";
> > + type = "a";
> > +
> > + port {
> > + hdmi_con_in: endpoint {
> > + remote-endpoint = <&hdmi_out_con>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&ac_power_supply {
> > + status = "okay";
> > +};
> > +
> > +&ahci {
> > + target-supply = <®_ahci_5v>;
> > + status = "okay";
> > +};
> > +
> > +&axp209 {
> > + interrupt-parent = <&nmi_intc>;
> > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> > +};
> > +
> > +&battery_power_supply {
> > + status = "okay";
> > +};
> > +
> > +&codec {
> > + stauts = "okay";
> > +};
> > +
> > +&de {
> > + status = "okay";
> > +};
> > +
> > +&emac {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&emac_pa_pins>;
> > + phy-handle = <&phy1>;
> > + status = "okay";
> > +};
> > +
> > +&emac_sram {
> > + status = "okay";
> > +};
> > +
> > +&hdmi {
> > + status = "okay";
> > +};
> > +
> > +&hdmi_out {
> > + hdmi_out_con: endpoint {
> > + remote-endpoint = <&hdmi_con_in>;
> > + };
> > +};
> > +
> > +&mdio {
> > + status = "okay";
> > +
> > + phy1: ethernet-phy@1 {
> > + reg = <1>;
> > + };
> > +};
> > +
> > +&mmc0 {
> > + vmmc-supply = <®_vcc3v3>;
> > + bus-width = <4>;
> > + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
> > + status = "okay";
> > +};
> > +
> > +&otg_sram {
> > + status = "okay";
> > +};
> > +
> > +®_ahci_5v {
> > + status = "okay";
> > +};
> > +
> > +®_usb0_vbus {
> > + status = "okay";
> > +};
> > +
> > +&usb_otg {
> > + status = "okay";
> > + dr_mode = "host";
> > +};
> > +
> > +&usbphy {
> > + usb0_vbus-supply = <®_usb0_vbus>;
> > +};
> > --
> > 2.42.0
> >
> >
>
>
>
>
>