Add the board binding for the Shenzen AZW (Beelink) GT1 Ultimate
Android Set-Top Box device.
Signed-off-by: Christian Hewitt <[email protected]>
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 61a6cabb375b..3217c069673e 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -120,6 +120,7 @@ properties:
- enum:
- amlogic,q200
- amlogic,q201
+ - azw,gt1-ultimate
- khadas,vim2
- kingnovel,r-box-pro
- libretech,aml-s912-pc
--
2.17.1
The Beelink GT1 Ultimate is based on the Amlogic S912 (Q200)
reference design with the following specifications:
- 3GB DDR3 RAM
- 32GB eMMC
- HDMI 2.1 video
- S/PDIF optical output
- 10/100/1000 Ethernet
- AP6356S Wireless (802.11 a/b/g/n, BT 4.2)
- 3x USB 2.0 ports
- IR receiver
- 1x micro SD card slot
- 1x Power LED (white)
- 1x Reset button (internal)
Signed-off-by: Christian Hewitt <[email protected]>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../dts/amlogic/meson-gxm-gt1-ultimate.dts | 91 +++++++++++++++++++
2 files changed, 92 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 8773211df50e..641399fcbdd9 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -43,6 +43,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-gt1-ultimate.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts
new file mode 100644
index 000000000000..2c267884cc16
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) Christian Hewitt <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "azw,gt1-ultimate", "amlogic,s912", "amlogic,meson-gxm";
+ model = "Beelink GT1 Ultimate";
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-white {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ panic-indicator;
+ };
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1710000>;
+
+ button-function {
+ label = "update";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <10000>;
+ };
+ };
+};
+
+ðmac {
+ pinctrl-0 = <ð_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&external_phy>;
+ amlogic,tx-delay-ns = <2>;
+ phy-mode = "rgmii";
+};
+
+&external_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_15 */
+ interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&ir {
+ linux,rc-map-name = "rc-beelink-gs1";
+};
+
+&sd_emmc_a {
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
+ };
+};
--
2.17.1
On Thu, 07 Jul 2022 09:39:53 +0000, Christian Hewitt wrote:
> Add the board binding for the Shenzen AZW (Beelink) GT1 Ultimate
> Android Set-Top Box device.
>
> Signed-off-by: Christian Hewitt <[email protected]>
> ---
> Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <[email protected]>
On 07/07/2022 11:39, Christian Hewitt wrote:
> The Beelink GT1 Ultimate is based on the Amlogic S912 (Q200)
> reference design with the following specifications:
>
> - 3GB DDR3 RAM
> - 32GB eMMC
> - HDMI 2.1 video
> - S/PDIF optical output
> - 10/100/1000 Ethernet
> - AP6356S Wireless (802.11 a/b/g/n, BT 4.2)
> - 3x USB 2.0 ports
> - IR receiver
> - 1x micro SD card slot
> - 1x Power LED (white)
> - 1x Reset button (internal)
>
> Signed-off-by: Christian Hewitt <[email protected]>
> ---
> arch/arm64/boot/dts/amlogic/Makefile | 1 +
> .../dts/amlogic/meson-gxm-gt1-ultimate.dts | 91 +++++++++++++++++++
> 2 files changed, 92 insertions(+)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts
>
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 8773211df50e..641399fcbdd9 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -43,6 +43,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-gt1-ultimate.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts
> new file mode 100644
> index 000000000000..2c267884cc16
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts
> @@ -0,0 +1,91 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) Christian Hewitt <[email protected]>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-gxm.dtsi"
> +#include "meson-gx-p23x-q20x.dtsi"
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> + compatible = "azw,gt1-ultimate", "amlogic,s912", "amlogic,meson-gxm";
> + model = "Beelink GT1 Ultimate";
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led-white {
> + color = <LED_COLOR_ID_WHITE>;
> + function = LED_FUNCTION_POWER;
> + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
> + default-state = "on";
> + panic-indicator;
> + };
> + };
> +
> + adc-keys {
> + compatible = "adc-keys";
> + io-channels = <&saradc 0>;
> + io-channel-names = "buttons";
> + keyup-threshold-microvolt = <1710000>;
> +
> + button-function {
> + label = "update";
> + linux,code = <KEY_VENDOR>;
> + press-threshold-microvolt = <10000>;
> + };
> + };
> +};
> +
> +ðmac {
> + pinctrl-0 = <ð_pins>;
> + pinctrl-names = "default";
> + phy-handle = <&external_phy>;
> + amlogic,tx-delay-ns = <2>;
> + phy-mode = "rgmii";
> +};
> +
> +&external_mdio {
> + external_phy: ethernet-phy@0 {
> + /* Realtek RTL8211F (0x001cc916) */
> + reg = <0>;
> + max-speed = <1000>;
> +
> + reset-assert-us = <10000>;
> + reset-deassert-us = <80000>;
> + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
> +
> + interrupt-parent = <&gpio_intc>;
> + /* MAC_INTR on GPIOZ_15 */
> + interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
> +
> +&ir {
> + linux,rc-map-name = "rc-beelink-gs1";
> +};
> +
> +&sd_emmc_a {
> + brcmf: wifi@1 {
> + reg = <1>;
> + compatible = "brcm,bcm4329-fmac";
> + };
> +};
> +
> +&uart_A {
> + status = "okay";
> + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> + pinctrl-names = "default";
> + uart-has-rtscts;
> +
> + bluetooth {
> + compatible = "brcm,bcm43438-bt";
> + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> + max-speed = <2000000>;
> + clocks = <&wifi32k>;
> + clock-names = "lpo";
> + };
> +};
Looks fine for me:
Reviewed-by: Neil Armstrong <[email protected]>
Hi,
On Thu, 7 Jul 2022 09:39:53 +0000, Christian Hewitt wrote:
> Add the board binding for the Shenzen AZW (Beelink) GT1 Ultimate
> Android Set-Top Box device.
>
>
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.1/dt64)
[1/2] dt-bindings: arm: amlogic: add Beelink GT1 Ultimate binding
https://git.kernel.org/amlogic/c/70bff3a65d4b974434b7f576f52a269fa4f0dd04
[2/2] arm64: dts: meson: add support for Beelink GT1 Ultimate
https://git.kernel.org/amlogic/c/5b3a87a5c4f20da682d50dbaf8c4aa357cfd0d2d
These changes has been applied on the intermediate git tree [1].
The v6.1/dt64 branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.
In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].
The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.
If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
--
Neil