From: Rafael J. Wysocki <[email protected]>
Function update_trip_temp() is currently used for the initialization
of trip points as well as for changing trip point temperatures in
sys_set_trip_temp().
This is quite confusing and passing the value of dts->trip_types[trip]
to it so that it can store that value in the same memory location is
not particularly useful, because it only is necessary to set the
trip point type once, at the initialization time.
For this reason, drop the last argument from update_trip_temp() and
introduce configure_trip() calling the former internally for the
initial configuration of trip points.
Modify the majority of update_trip_temp() callers to use
configure_trip() instead of it.
Signed-off-by: Rafael J. Wysocki <[email protected]>
---
drivers/thermal/intel/intel_soc_dts_iosf.c | 37 ++++++++++++++++++-----------
1 file changed, 24 insertions(+), 13 deletions(-)
Index: linux-pm/drivers/thermal/intel/intel_soc_dts_iosf.c
===================================================================
--- linux-pm.orig/drivers/thermal/intel/intel_soc_dts_iosf.c
+++ linux-pm/drivers/thermal/intel/intel_soc_dts_iosf.c
@@ -67,8 +67,7 @@ static int sys_get_trip_temp(struct ther
}
static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
- int thres_index, int temp,
- enum thermal_trip_type trip_type)
+ int thres_index, int temp)
{
int status;
u32 temp_out;
@@ -142,8 +141,6 @@ static int update_trip_temp(struct intel
if (status)
goto err_restore_te_out;
- dts->trip_types[thres_index] = trip_type;
-
return 0;
err_restore_te_out:
iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
@@ -159,6 +156,21 @@ err_restore_ptps:
return status;
}
+static int configure_trip(struct intel_soc_dts_sensor_entry *dts,
+ int thres_index, enum thermal_trip_type trip_type,
+ int temp)
+{
+ int ret;
+
+ ret = update_trip_temp(dts, thres_index, temp);
+ if (ret)
+ return ret;
+
+ dts->trip_types[thres_index] = trip_type;
+
+ return 0;
+}
+
static int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip,
int temp)
{
@@ -170,8 +182,7 @@ static int sys_set_trip_temp(struct ther
return -EINVAL;
mutex_lock(&sensors->dts_update_lock);
- status = update_trip_temp(dts, trip, temp,
- dts->trip_types[trip]);
+ status = update_trip_temp(dts, trip, temp);
mutex_unlock(&sensors->dts_update_lock);
return status;
@@ -317,7 +328,7 @@ int intel_soc_dts_iosf_add_read_only_cri
j = find_first_zero_bit(&mask, SOC_MAX_DTS_TRIPS);
if (j < SOC_MAX_DTS_TRIPS)
- return update_trip_temp(entry, j, temp, THERMAL_TRIP_CRITICAL);
+ return configure_trip(entry, j, THERMAL_TRIP_CRITICAL, temp);
}
return -EINVAL;
@@ -395,13 +406,13 @@ struct intel_soc_dts_sensors *intel_soc_
}
for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
- ret = update_trip_temp(&sensors->soc_dts[i], 0, 0,
- THERMAL_TRIP_PASSIVE);
+ ret = configure_trip(&sensors->soc_dts[i], 0,
+ THERMAL_TRIP_PASSIVE, 0);
if (ret)
goto err_remove_zone;
- ret = update_trip_temp(&sensors->soc_dts[i], 1, 0,
- THERMAL_TRIP_PASSIVE);
+ ret = configure_trip(&sensors->soc_dts[i], 1,
+ THERMAL_TRIP_PASSIVE, 0);
if (ret)
goto err_remove_zone;
}
@@ -422,8 +433,8 @@ void intel_soc_dts_iosf_exit(struct inte
int i;
for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
- update_trip_temp(&sensors->soc_dts[i], 0, 0, 0);
- update_trip_temp(&sensors->soc_dts[i], 1, 0, 0);
+ configure_trip(&sensors->soc_dts[i], 0, 0, 0);
+ configure_trip(&sensors->soc_dts[i], 1, 0, 0);
remove_dts_thermal_zone(&sensors->soc_dts[i]);
}
kfree(sensors);