This patch adds ACPI support for the APM X-Gene DMA engine driver.
Signed-off-by: Rameshwar Prasad Sahu <[email protected]>
---
drivers/dma/xgene-dma.c | 28 +++++++++++++++++++++-------
1 file changed, 21 insertions(+), 7 deletions(-)
diff --git a/drivers/dma/xgene-dma.c b/drivers/dma/xgene-dma.c
index dff22ab..d0a148d 100644
--- a/drivers/dma/xgene-dma.c
+++ b/drivers/dma/xgene-dma.c
@@ -21,6 +21,7 @@
* NOTE: PM support is currently not available.
*/
+#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
@@ -1944,16 +1945,18 @@ static int xgene_dma_probe(struct platform_device *pdev)
return ret;
pdma->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(pdma->clk)) {
+ if (IS_ERR(pdma->clk) && !ACPI_COMPANION(&pdev->dev)) {
dev_err(&pdev->dev, "Failed to get clk\n");
return PTR_ERR(pdma->clk);
}
/* Enable clk before accessing registers */
- ret = clk_prepare_enable(pdma->clk);
- if (ret) {
- dev_err(&pdev->dev, "Failed to enable clk %d\n", ret);
- return ret;
+ if (!IS_ERR(pdma->clk)) {
+ ret = clk_prepare_enable(pdma->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to enable clk %d\n", ret);
+ return ret;
+ }
}
/* Remove DMA RAM out of shutdown */
@@ -1998,7 +2001,8 @@ err_request_irq:
err_dma_mask:
err_clk_enable:
- clk_disable_unprepare(pdma->clk);
+ if (!IS_ERR(pdma->clk))
+ clk_disable_unprepare(pdma->clk);
return ret;
}
@@ -2022,11 +2026,20 @@ static int xgene_dma_remove(struct platform_device *pdev)
xgene_dma_delete_chan_rings(chan);
}
- clk_disable_unprepare(pdma->clk);
+ if (!IS_ERR(pdma->clk))
+ clk_disable_unprepare(pdma->clk);
return 0;
}
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xgene_dma_acpi_match_ptr[] = {
+ {"APMC0D43", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, xgene_dma_acpi_match_ptr);
+#endif
+
static const struct of_device_id xgene_dma_of_match_ptr[] = {
{.compatible = "apm,xgene-storm-dma",},
{},
@@ -2039,6 +2052,7 @@ static struct platform_driver xgene_dma_driver = {
.driver = {
.name = "X-Gene-DMA",
.of_match_table = xgene_dma_of_match_ptr,
+ .acpi_match_table = ACPI_PTR(xgene_dma_acpi_match_ptr),
},
};
--
1.8.2.1
Hi Vinod,
On Tue, Jul 21, 2015 at 6:44 PM, Rameshwar Prasad Sahu <[email protected]> wrote:
> This patch adds ACPI support for the APM X-Gene DMA engine driver.
>
> Signed-off-by: Rameshwar Prasad Sahu <[email protected]>
> ---
> drivers/dma/xgene-dma.c | 28 +++++++++++++++++++++-------
> 1 file changed, 21 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/dma/xgene-dma.c b/drivers/dma/xgene-dma.c
> index dff22ab..d0a148d 100644
> --- a/drivers/dma/xgene-dma.c
> +++ b/drivers/dma/xgene-dma.c
> @@ -21,6 +21,7 @@
> * NOTE: PM support is currently not available.
> */
>
> +#include <linux/acpi.h>
> #include <linux/clk.h>
> #include <linux/delay.h>
> #include <linux/dma-mapping.h>
> @@ -1944,16 +1945,18 @@ static int xgene_dma_probe(struct platform_device *pdev)
> return ret;
>
> pdma->clk = devm_clk_get(&pdev->dev, NULL);
> - if (IS_ERR(pdma->clk)) {
> + if (IS_ERR(pdma->clk) && !ACPI_COMPANION(&pdev->dev)) {
> dev_err(&pdev->dev, "Failed to get clk\n");
> return PTR_ERR(pdma->clk);
> }
>
> /* Enable clk before accessing registers */
> - ret = clk_prepare_enable(pdma->clk);
> - if (ret) {
> - dev_err(&pdev->dev, "Failed to enable clk %d\n", ret);
> - return ret;
> + if (!IS_ERR(pdma->clk)) {
> + ret = clk_prepare_enable(pdma->clk);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to enable clk %d\n", ret);
> + return ret;
> + }
> }
>
> /* Remove DMA RAM out of shutdown */
> @@ -1998,7 +2001,8 @@ err_request_irq:
>
> err_dma_mask:
> err_clk_enable:
> - clk_disable_unprepare(pdma->clk);
> + if (!IS_ERR(pdma->clk))
> + clk_disable_unprepare(pdma->clk);
>
> return ret;
> }
> @@ -2022,11 +2026,20 @@ static int xgene_dma_remove(struct platform_device *pdev)
> xgene_dma_delete_chan_rings(chan);
> }
>
> - clk_disable_unprepare(pdma->clk);
> + if (!IS_ERR(pdma->clk))
> + clk_disable_unprepare(pdma->clk);
>
> return 0;
> }
>
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id xgene_dma_acpi_match_ptr[] = {
> + {"APMC0D43", 0},
> + {},
> +};
> +MODULE_DEVICE_TABLE(acpi, xgene_dma_acpi_match_ptr);
> +#endif
> +
> static const struct of_device_id xgene_dma_of_match_ptr[] = {
> {.compatible = "apm,xgene-storm-dma",},
> {},
> @@ -2039,6 +2052,7 @@ static struct platform_driver xgene_dma_driver = {
> .driver = {
> .name = "X-Gene-DMA",
> .of_match_table = xgene_dma_of_match_ptr,
> + .acpi_match_table = ACPI_PTR(xgene_dma_acpi_match_ptr),
> },
> };
>
> --
> 1.8.2.1
Any comment here ??
On Tuesday 21 July 2015 18:44:39 Rameshwar Prasad Sahu wrote:
> This patch adds ACPI support for the APM X-Gene DMA engine driver.
>
> Signed-off-by: Rameshwar Prasad Sahu <[email protected]>
>
How does a slave driver refer to a channel in case of ACPI?
Arnd
Hi Arnd,
On Wed, Jul 29, 2015 at 8:04 PM, Arnd Bergmann <[email protected]> wrote:
> On Tuesday 21 July 2015 18:44:39 Rameshwar Prasad Sahu wrote:
>> This patch adds ACPI support for the APM X-Gene DMA engine driver.
>>
>> Signed-off-by: Rameshwar Prasad Sahu <[email protected]>
>>
>
> How does a slave driver refer to a channel in case of ACPI?
We don't support slave dma here. This driver supports only memcp, xor,
pq, scatter-gather offloading, so,
client driver can use linux dmaengine APIs like dma_request_channel()
etc to request channel.
>
> Arnd
> --
> To unsubscribe from this list: send the line "unsubscribe dmaengine" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday 30 July 2015 14:21:07 Rameshwar Sahu wrote:
> Hi Arnd,
>
> On Wed, Jul 29, 2015 at 8:04 PM, Arnd Bergmann <[email protected]> wrote:
> > On Tuesday 21 July 2015 18:44:39 Rameshwar Prasad Sahu wrote:
> >> This patch adds ACPI support for the APM X-Gene DMA engine driver.
> >>
> >> Signed-off-by: Rameshwar Prasad Sahu <[email protected]>
> >>
> >
> > How does a slave driver refer to a channel in case of ACPI?
>
> We don't support slave dma here. This driver supports only memcp, xor,
> pq, scatter-gather offloading, so,
> client driver can use linux dmaengine APIs like dma_request_channel()
> etc to request channel.
Ok, makes sense. Thanks!
Arnd
Hi Vinod,
On Tue, Jul 21, 2015 at 6:44 PM, Rameshwar Prasad Sahu <[email protected]> wrote:
> This patch adds ACPI support for the APM X-Gene DMA engine driver.
>
> Signed-off-by: Rameshwar Prasad Sahu <[email protected]>
> ---
> drivers/dma/xgene-dma.c | 28 +++++++++++++++++++++-------
> 1 file changed, 21 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/dma/xgene-dma.c b/drivers/dma/xgene-dma.c
> index dff22ab..d0a148d 100644
> --- a/drivers/dma/xgene-dma.c
> +++ b/drivers/dma/xgene-dma.c
> @@ -21,6 +21,7 @@
> * NOTE: PM support is currently not available.
> */
>
> +#include <linux/acpi.h>
> #include <linux/clk.h>
> #include <linux/delay.h>
> #include <linux/dma-mapping.h>
> @@ -1944,16 +1945,18 @@ static int xgene_dma_probe(struct platform_device *pdev)
> return ret;
>
> pdma->clk = devm_clk_get(&pdev->dev, NULL);
> - if (IS_ERR(pdma->clk)) {
> + if (IS_ERR(pdma->clk) && !ACPI_COMPANION(&pdev->dev)) {
> dev_err(&pdev->dev, "Failed to get clk\n");
> return PTR_ERR(pdma->clk);
> }
>
> /* Enable clk before accessing registers */
> - ret = clk_prepare_enable(pdma->clk);
> - if (ret) {
> - dev_err(&pdev->dev, "Failed to enable clk %d\n", ret);
> - return ret;
> + if (!IS_ERR(pdma->clk)) {
> + ret = clk_prepare_enable(pdma->clk);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to enable clk %d\n", ret);
> + return ret;
> + }
> }
>
> /* Remove DMA RAM out of shutdown */
> @@ -1998,7 +2001,8 @@ err_request_irq:
>
> err_dma_mask:
> err_clk_enable:
> - clk_disable_unprepare(pdma->clk);
> + if (!IS_ERR(pdma->clk))
> + clk_disable_unprepare(pdma->clk);
>
> return ret;
> }
> @@ -2022,11 +2026,20 @@ static int xgene_dma_remove(struct platform_device *pdev)
> xgene_dma_delete_chan_rings(chan);
> }
>
> - clk_disable_unprepare(pdma->clk);
> + if (!IS_ERR(pdma->clk))
> + clk_disable_unprepare(pdma->clk);
>
> return 0;
> }
>
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id xgene_dma_acpi_match_ptr[] = {
> + {"APMC0D43", 0},
> + {},
> +};
> +MODULE_DEVICE_TABLE(acpi, xgene_dma_acpi_match_ptr);
> +#endif
> +
> static const struct of_device_id xgene_dma_of_match_ptr[] = {
> {.compatible = "apm,xgene-storm-dma",},
> {},
> @@ -2039,6 +2052,7 @@ static struct platform_driver xgene_dma_driver = {
> .driver = {
> .name = "X-Gene-DMA",
> .of_match_table = xgene_dma_of_match_ptr,
> + .acpi_match_table = ACPI_PTR(xgene_dma_acpi_match_ptr),
> },
> };
>
> --
> 1.8.2.1
Any Comments on the above patch ??
On Tue, Jul 21, 2015 at 06:44:39PM +0530, Rameshwar Prasad Sahu wrote:
> This patch adds ACPI support for the APM X-Gene DMA engine driver.
Applied, thanks
--
~Vinod