These patches add support for Novatek NT35596S based JDI FHD panels,
found in Xiaomi Mi Mix2S mobile phones.
Changes in v4:
- Correct numeric order of the items in binding.
Changes in v3:
- Embed the support into existing driver (panel-novatek-nt36672a), as
these two IC are similar with different initialization commands.
Changes in v2:
- Correct items order in Makefile and improve failure handling.
Molly Sophia (2):
dt-bindings: display: panel: Add Novatek NT35596S panel bindings
drm: panel: Add novatek nt35596s panel driver
.../display/panel/novatek,nt36672a.yaml | 20 +-
drivers/gpu/drm/panel/Kconfig | 7 +-
.../gpu/drm/panel/panel-novatek-nt36672a.c | 246 ++++++++++++++++--
3 files changed, 247 insertions(+), 26 deletions(-)
--
2.37.1
Novatek NT35596s is a generic DSI IC that drives command and video mode
panels. Add the driver for it. Currently add support for the LCD panel
from JDI connected with this IC, as found on Xiaomi Mi Mix2s phones.
Changes in v4:
- No change.
Changes in v3:
- Embed the support into existing driver (panel-novatek-nt36672a), as
these two IC are similar with different initialization commands.
Signed-off-by: Molly Sophia <[email protected]>
---
drivers/gpu/drm/panel/Kconfig | 7 +-
.../gpu/drm/panel/panel-novatek-nt36672a.c | 246 ++++++++++++++++--
2 files changed, 234 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 38799effd00a..ecc1b9aa6a1c 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -328,14 +328,15 @@ config DRM_PANEL_NOVATEK_NT35950
mobile phones.
config DRM_PANEL_NOVATEK_NT36672A
- tristate "Novatek NT36672A DSI panel"
+ tristate "Novatek NT36672A/NT35596S DSI panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the panels built
- around the Novatek NT36672A display controller, such as some
- Tianma panels used in a few Xiaomi Poco F1 mobile phones.
+ around the Novatek NT36672A or NT35596S display controller, such
+ as some Tianma panels used in a few Xiaomi Poco F1 mobile phones
+ or the JDI panels used in Xiaomi Mi Mix2S mobile phones.
config DRM_PANEL_NOVATEK_NT39016
tristate "Novatek NT39016 RGB/SPI panel"
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36672a.c b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
index 231f371901e8..fcdde538d847 100644
--- a/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
+++ b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
@@ -3,13 +3,15 @@
* Copyright (C) 2020 Linaro Ltd
* Author: Sumit Semwal <[email protected]>
*
- * This driver is for the DSI interface to panels using the NT36672A display driver IC
+ * Copyright (C) 2022 Molly Sophia <[email protected]>
+ *
+ * This driver is for the DSI interface to panels using the NT36672A/NT35596S display driver IC
* from Novatek.
* Currently supported are the Tianma FHD+ panels found in some Xiaomi phones, including
- * some variants of the Poco F1 phone.
+ * some variants of the Poco F1 phone, and the JDI FHD+ panels found in Xiaomi Mi Mix2S phones.
*
- * Panels using the Novatek NT37762A IC should add appropriate configuration per-panel and
- * use this driver.
+ * Panels using the Novatek NT37762A or NT35596S IC should add appropriate configuration
+ * per-panel and use this driver.
*/
#include <linux/delay.h>
@@ -123,12 +125,14 @@ static int nt36672a_panel_unprepare(struct drm_panel *panel)
if (!pinfo->prepared)
return 0;
- /* send off cmds */
- ret = nt36672a_send_cmds(panel, pinfo->desc->off_cmds,
- pinfo->desc->num_off_cmds);
+ if (pinfo->desc->num_off_cmds != 0) {
+ /* send off cmds if present */
+ ret = nt36672a_send_cmds(panel, pinfo->desc->off_cmds,
+ pinfo->desc->num_off_cmds);
- if (ret < 0)
- dev_err(panel->dev, "failed to send DCS off cmds: %d\n", ret);
+ if (ret < 0)
+ dev_err(panel->dev, "failed to send DCS off cmds: %d\n", ret);
+ }
ret = mipi_dsi_dcs_set_display_off(pinfo->link);
if (ret < 0)
@@ -211,13 +215,15 @@ static int nt36672a_panel_prepare(struct drm_panel *panel)
goto poweroff;
}
- /* Send rest of the init cmds */
- err = nt36672a_send_cmds(panel, pinfo->desc->on_cmds_2,
- pinfo->desc->num_on_cmds_2);
+ if (pinfo->desc->num_on_cmds_2 != 0) {
+ /* Send rest of the init cmds if present */
+ err = nt36672a_send_cmds(panel, pinfo->desc->on_cmds_2,
+ pinfo->desc->num_on_cmds_2);
- if (err < 0) {
- dev_err(panel->dev, "failed to send DCS Init 2nd Code: %d\n", err);
- goto poweroff;
+ if (err < 0) {
+ dev_err(panel->dev, "failed to send DCS Init 2nd Code: %d\n", err);
+ goto poweroff;
+ }
}
msleep(120);
@@ -601,6 +607,212 @@ static const struct nt36672a_panel_desc tianma_fhd_video_panel_desc = {
.num_off_cmds = ARRAY_SIZE(tianma_fhd_video_off_cmds),
};
+static const struct nt36672a_panel_cmd jdi_nt35596s_video_on_cmds[] = {
+ { .data = { 0xff, 0x24 } },
+ { .data = { 0x9d, 0x34 } },
+ { .data = { 0xfb, 0x01 } },
+ { .data = { 0xc4, 0x25 } },
+ { .data = { 0xd1, 0x08 } },
+ { .data = { 0xd2, 0x84 } },
+ { .data = { 0xff, 0x26 } },
+ { .data = { 0xfb, 0x01 } },
+ { .data = { 0x03, 0x1c } },
+ { .data = { 0x3b, 0x08 } },
+ { .data = { 0x6b, 0x08 } },
+ { .data = { 0x97, 0x08 } },
+ { .data = { 0xc5, 0x08 } },
+ { .data = { 0xfb, 0x01 } },
+ { .data = { 0xff, 0x23 } },
+ { .data = { 0xfb, 0x01 } },
+ { .data = { 0x01, 0x84 } },
+ { .data = { 0x05, 0x2d } },
+ { .data = { 0x06, 0x00 } },
+ { .data = { 0x33, 0x07 } },
+ { .data = { 0x21, 0xee } },
+ { .data = { 0x22, 0xed } },
+ { .data = { 0x23, 0xea } },
+ { .data = { 0x24, 0xe8 } },
+ { .data = { 0x25, 0xe5 } },
+ { .data = { 0x26, 0xe2 } },
+ { .data = { 0x27, 0xde } },
+ { .data = { 0x28, 0xbb } },
+ { .data = { 0x29, 0x87 } },
+ { .data = { 0x2a, 0x77 } },
+ { .data = { 0x32, 0x0c } },
+ { .data = { 0x13, 0x3f } },
+ { .data = { 0x14, 0x34 } },
+ { .data = { 0x15, 0x2a } },
+ { .data = { 0x16, 0x25 } },
+ { .data = { 0x17, 0x9d } },
+ { .data = { 0x18, 0x9a } },
+ { .data = { 0x19, 0x97 } },
+ { .data = { 0x1a, 0x94 } },
+ { .data = { 0x1b, 0x91 } },
+ { .data = { 0x1c, 0x8e } },
+ { .data = { 0x1d, 0x8b } },
+ { .data = { 0x1e, 0x89 } },
+ { .data = { 0x1f, 0x86 } },
+ { .data = { 0x20, 0x83 } },
+ { .data = { 0xff, 0x22 } },
+ { .data = { 0x00, 0x0a } },
+ { .data = { 0x01, 0x43 } },
+ { .data = { 0x02, 0x5b } },
+ { .data = { 0x03, 0x6a } },
+ { .data = { 0x04, 0x7a } },
+ { .data = { 0x05, 0x82 } },
+ { .data = { 0x06, 0x85 } },
+ { .data = { 0x07, 0x80 } },
+ { .data = { 0x08, 0x7c } },
+ { .data = { 0x09, 0x7c } },
+ { .data = { 0x0a, 0x74 } },
+ { .data = { 0x0b, 0x71 } },
+ { .data = { 0x0c, 0x6e } },
+ { .data = { 0x0d, 0x68 } },
+ { .data = { 0x0e, 0x65 } },
+ { .data = { 0x0f, 0x5c } },
+ { .data = { 0x10, 0x32 } },
+ { .data = { 0x11, 0x18 } },
+ { .data = { 0x12, 0x00 } },
+ { .data = { 0x13, 0x00 } },
+ { .data = { 0x1a, 0x00 } },
+ { .data = { 0x1b, 0x00 } },
+ { .data = { 0x1c, 0x00 } },
+ { .data = { 0x1d, 0x00 } },
+ { .data = { 0x1e, 0x00 } },
+ { .data = { 0x1f, 0x00 } },
+ { .data = { 0x20, 0x00 } },
+ { .data = { 0x21, 0x00 } },
+ { .data = { 0x22, 0x00 } },
+ { .data = { 0x23, 0x00 } },
+ { .data = { 0x24, 0x00 } },
+ { .data = { 0x25, 0x00 } },
+ { .data = { 0x26, 0x00 } },
+ { .data = { 0x27, 0x00 } },
+ { .data = { 0x28, 0x00 } },
+ { .data = { 0x29, 0x00 } },
+ { .data = { 0x2a, 0x00 } },
+ { .data = { 0x2b, 0x00 } },
+ { .data = { 0x2f, 0x00 } },
+ { .data = { 0x30, 0x00 } },
+ { .data = { 0x31, 0x00 } },
+ { .data = { 0x32, 0x0c } },
+ { .data = { 0x33, 0x0c } },
+ { .data = { 0x34, 0x0c } },
+ { .data = { 0x35, 0x0b } },
+ { .data = { 0x36, 0x09 } },
+ { .data = { 0x37, 0x09 } },
+ { .data = { 0x38, 0x08 } },
+ { .data = { 0x39, 0x05 } },
+ { .data = { 0x3a, 0x03 } },
+ { .data = { 0x3b, 0x00 } },
+ { .data = { 0x3f, 0x00 } },
+ { .data = { 0x40, 0x00 } },
+ { .data = { 0x41, 0x00 } },
+ { .data = { 0x42, 0x00 } },
+ { .data = { 0x43, 0x00 } },
+ { .data = { 0x44, 0x00 } },
+ { .data = { 0x45, 0x00 } },
+ { .data = { 0x46, 0x00 } },
+ { .data = { 0x47, 0x00 } },
+ { .data = { 0x48, 0x00 } },
+ { .data = { 0x49, 0x03 } },
+ { .data = { 0x4a, 0x06 } },
+ { .data = { 0x4b, 0x07 } },
+ { .data = { 0x4c, 0x07 } },
+ { .data = { 0x53, 0x01 } },
+ { .data = { 0x54, 0x01 } },
+ { .data = { 0x55, 0x89 } },
+ { .data = { 0x56, 0x00 } },
+ { .data = { 0x58, 0x00 } },
+ { .data = { 0x68, 0x00 } },
+ { .data = { 0x84, 0xff } },
+ { .data = { 0x85, 0xff } },
+ { .data = { 0x86, 0x03 } },
+ { .data = { 0x87, 0x00 } },
+ { .data = { 0x88, 0x00 } },
+ { .data = { 0xa2, 0x20 } },
+ { .data = { 0xa9, 0x01 } },
+ { .data = { 0xaa, 0x12 } },
+ { .data = { 0xab, 0x13 } },
+ { .data = { 0xac, 0x0a } },
+ { .data = { 0xad, 0x74 } },
+ { .data = { 0xaf, 0x33 } },
+ { .data = { 0xb0, 0x03 } },
+ { .data = { 0xb1, 0x14 } },
+ { .data = { 0xb2, 0x42 } },
+ { .data = { 0xb3, 0x40 } },
+ { .data = { 0xb4, 0xa5 } },
+ { .data = { 0xb6, 0x44 } },
+ { .data = { 0xb7, 0x04 } },
+ { .data = { 0xb8, 0x14 } },
+ { .data = { 0xb9, 0x42 } },
+ { .data = { 0xba, 0x40 } },
+ { .data = { 0xbb, 0xa5 } },
+ { .data = { 0xbd, 0x44 } },
+ { .data = { 0xbe, 0x04 } },
+ { .data = { 0xbf, 0x00 } },
+ { .data = { 0xc0, 0x75 } },
+ { .data = { 0xc1, 0x6a } },
+ { .data = { 0xc2, 0xa5 } },
+ { .data = { 0xc4, 0x22 } },
+ { .data = { 0xc5, 0x02 } },
+ { .data = { 0xc6, 0x00 } },
+ { .data = { 0xc7, 0x95 } },
+ { .data = { 0xc8, 0x8a } },
+ { .data = { 0xc9, 0xa5 } },
+ { .data = { 0xcb, 0x22 } },
+ { .data = { 0xcc, 0x02 } },
+ { .data = { 0xcd, 0x00 } },
+ { .data = { 0xce, 0xb5 } },
+ { .data = { 0xcf, 0xaa } },
+ { .data = { 0xd0, 0xa5 } },
+ { .data = { 0xd2, 0x22 } },
+ { .data = { 0xd3, 0x02 } },
+ { .data = { 0xfb, 0x01 } },
+ { .data = { 0xff, 0x10 } },
+ { .data = { 0x26, 0x02 } },
+ { .data = { 0x35, 0x00 } },
+ { .data = { 0x51, 0xff } },
+ { .data = { 0x53, 0x24 } },
+ { .data = { 0x55, 0x00 } },
+ { .data = { 0xb0, 0x00 } },
+};
+
+static const struct drm_display_mode jdi_nt35596s_video_panel_mode = {
+ .clock = (1080 + 16 + 28 + 40) * (2160 + 7 + 4 + 24) * 60 / 1000,
+
+ .hdisplay = 1080,
+ .hsync_start = 1080 + 16,
+ .hsync_end = 1080 + 16 + 28,
+ .htotal = 1080 + 16 + 28 + 40,
+
+ .vdisplay = 2160,
+ .vsync_start = 2160 + 7,
+ .vsync_end = 2160 + 7 + 4,
+ .vtotal = 2160 + 7 + 4 + 24,
+
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static const struct nt36672a_panel_desc jdi_nt35596s_video_panel_desc = {
+ .display_mode = &jdi_nt35596s_video_panel_mode,
+
+ .width_mm = 68,
+ .height_mm = 136,
+
+ .mode_flags = MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_VIDEO |
+ MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_CLOCK_NON_CONTINUOUS |
+ MIPI_DSI_MODE_VIDEO_BURST,
+ .format = MIPI_DSI_FMT_RGB888,
+ .lanes = 4,
+ .on_cmds_1 = jdi_nt35596s_video_on_cmds,
+ .num_on_cmds_1 = ARRAY_SIZE(jdi_nt35596s_video_on_cmds),
+ .on_cmds_2 = NULL,
+ .num_on_cmds_2 = 0,
+ .off_cmds = NULL,
+ .num_off_cmds = 0,
+};
+
static int nt36672a_panel_add(struct nt36672a_panel *pinfo)
{
struct device *dev = &pinfo->link->dev;
@@ -697,6 +909,7 @@ static void nt36672a_panel_shutdown(struct mipi_dsi_device *dsi)
static const struct of_device_id tianma_fhd_video_of_match[] = {
{ .compatible = "tianma,fhd-video", .data = &tianma_fhd_video_panel_desc },
+ { .compatible = "jdi,fhd-nt35596s", .data = &jdi_nt35596s_video_panel_desc },
{ },
};
MODULE_DEVICE_TABLE(of, tianma_fhd_video_of_match);
@@ -713,5 +926,6 @@ static struct mipi_dsi_driver nt36672a_panel_driver = {
module_mipi_dsi_driver(nt36672a_panel_driver);
MODULE_AUTHOR("Sumit Semwal <[email protected]>");
-MODULE_DESCRIPTION("NOVATEK NT36672A based MIPI-DSI LCD panel driver");
+MODULE_AUTHOR("Molly Sophia <[email protected]>");
+MODULE_DESCRIPTION("NOVATEK NT36672A/NT35596S based MIPI-DSI LCD panel driver");
MODULE_LICENSE("GPL");
--
2.37.1
Add documentation for "novatek,nt35596s" panel.
Changes in v4:
- Correct numeric order of the items.
Changes in v3:
- Embed the documentation into existing one (novatek,nt36672a).
Signed-off-by: Molly Sophia <[email protected]>
---
.../display/panel/novatek,nt36672a.yaml | 20 ++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
index 563766d283f6..d21a4a87a9d8 100644
--- a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
@@ -20,14 +20,20 @@ allOf:
properties:
compatible:
- items:
- - enum:
- - tianma,fhd-video
- - const: novatek,nt36672a
+ oneOf:
+ - items:
+ - enum:
+ - jdi,fhd-nt35596s
+ - const: novatek,nt35596s
+
+ - items:
+ - enum:
+ - tianma,fhd-video
+ - const: novatek,nt36672a
+
description: This indicates the panel manufacturer of the panel that is
- in turn using the NT36672A panel driver. This compatible string
- determines how the NT36672A panel driver is configured for the indicated
- panel. The novatek,nt36672a compatible shall always be provided as a fallback.
+ in turn using the NT36672A or the NT35596S panel driver. This compatible string
+ determines how the panel driver is configured for the indicated panel.
reset-gpios:
maxItems: 1
--
2.37.1
On 28/07/2022 04:35, Molly Sophia wrote:
> Add documentation for "novatek,nt35596s" panel.
>
> Changes in v4:
> - Correct numeric order of the items.
>
> Changes in v3:
> - Embed the documentation into existing one (novatek,nt36672a).
This does not go to commit msg, but to changelog after ---
With this fixed:
Acked-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On 28/07/2022 04:35, Molly Sophia wrote:
> Novatek NT35596s is a generic DSI IC that drives command and video mode
> panels. Add the driver for it. Currently add support for the LCD panel
> from JDI connected with this IC, as found on Xiaomi Mi Mix2s phones.
>
> Changes in v4:
> - No change.
>
> Changes in v3:
> - Embed the support into existing driver (panel-novatek-nt36672a), as
> these two IC are similar with different initialization commands.
>
This does not go to commit msg (---).
Best regards,
Krzysztof
Hi Krzysztof
On Thu, Jul 28, 2022 at 02:17:29PM +0200, Krzysztof Kozlowski wrote:
> On 28/07/2022 04:35, Molly Sophia wrote:
> > Novatek NT35596s is a generic DSI IC that drives command and video mode
> > panels. Add the driver for it. Currently add support for the LCD panel
> > from JDI connected with this IC, as found on Xiaomi Mi Mix2s phones.
> >
> > Changes in v4:
> > - No change.
> >
> > Changes in v3:
> > - Embed the support into existing driver (panel-novatek-nt36672a), as
> > these two IC are similar with different initialization commands.
> >
>
> This does not go to commit msg (---).
It depends...
In the drm sub-system the general rule is if someone cares to write it,
then it deserves to be added to the commit message.
So for drm patches it is perfectly fine to have the history part
included in the commit message.
These sub-system differences does not makes it easier - I know.
Sam
On 28/07/2022 15:50, Sam Ravnborg wrote:
> Hi Krzysztof
> On Thu, Jul 28, 2022 at 02:17:29PM +0200, Krzysztof Kozlowski wrote:
>> On 28/07/2022 04:35, Molly Sophia wrote:
>>> Novatek NT35596s is a generic DSI IC that drives command and video mode
>>> panels. Add the driver for it. Currently add support for the LCD panel
>>> from JDI connected with this IC, as found on Xiaomi Mi Mix2s phones.
>>>
>>> Changes in v4:
>>> - No change.
>>>
>>> Changes in v3:
>>> - Embed the support into existing driver (panel-novatek-nt36672a), as
>>> these two IC are similar with different initialization commands.
>>>
>>
>> This does not go to commit msg (---).
> It depends...
>
> In the drm sub-system the general rule is if someone cares to write it,
> then it deserves to be added to the commit message.
> So for drm patches it is perfectly fine to have the history part
> included in the commit message.
>
> These sub-system differences does not makes it easier - I know.
OK, but I find it weird to store "No change" in commit log :)
Best regards,
Krzysztof