This patchset adds sysfs node to devfreq's frame work to measure trasition of frequency on runtime.
It will be created under '/sys/class/devfreq/<device name>/' as the name of 'trans_state'.
It contains transition table which represents total number of transition of each frerquency state to
others and also time spent the state.
--- example for device having 3 frequency levels ----------------------------------------------------
<freq level #1> <freq level #2> <freq level #3> time_spent
* <freq level #1> # of freq1 to freq2 # of freq1 to freq3 t1
<freq level #2> # of freq2 to freq1 # of freq2 to freq3 t2
<freq level #3> # of freq3 to freq1 # of freq3 to freq2 t3
total transition : N
-----------------------------------------------------------------------------------------------------
('*' represents last frequency changed at the time you inspect the node.)
Patch 1: Make sysfs node to DEVFREQ frame work.
Patch 2: Initialize freq_table and max_state in exynos4 devfreq driver to be
used for frequency trnasition measurement.
Jonghwa Lee (2):
devfreq: Add sysfs node for representing frequency transition
information.
devfreq: exynos4: Support initialization of freq_table and max_state
of devfreq's profile.
drivers/devfreq/devfreq.c | 89 +++++++++++++++++++++++++++++++++++++++++
drivers/devfreq/exynos4_bus.c | 30 +++++++++++++-
include/linux/devfreq.h | 9 ++++
3 files changed, 127 insertions(+), 1 deletions(-)
--
1.7.4.1
This patch adds sysfs node which can be used to get information of frequency
transition. It represents transition table which contains total number of transition of
each freqeuncy state and time spent. It is inspired CPUFREQ's status driver.
Signed-off-by: Jonghwa Lee <[email protected]>
---
drivers/devfreq/devfreq.c | 89 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/devfreq.h | 9 +++++
2 files changed, 98 insertions(+), 0 deletions(-)
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 70c31d4..8b53eaf 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -72,6 +72,41 @@ static struct devfreq *find_device_devfreq(struct device *dev)
return ERR_PTR(-ENODEV);
}
+int devfreq_get_freq_level(struct devfreq *devfreq, unsigned long freq)
+{
+ int lev;
+
+ for (lev = 0; lev < devfreq->profile->max_state; lev++)
+ if (freq == devfreq->profile->freq_table[lev])
+ return lev;
+
+ return -EINVAL;
+}
+
+int devfreq_update_status(struct devfreq *devfreq, unsigned long freq)
+{
+ int lev, prev_lev;
+ unsigned long cur_time;
+
+ lev = devfreq_get_freq_level(devfreq, freq);
+ if (lev < 0)
+ return lev;
+
+ cur_time = jiffies;
+ devfreq->time_in_state[lev] +=
+ cur_time - devfreq->last_stat_updated;
+ if (freq != devfreq->previous_freq) {
+ prev_lev = devfreq_get_freq_level(devfreq,
+ devfreq->previous_freq);
+ devfreq->trans_table[(prev_lev *
+ devfreq->profile->max_state) + lev]++;
+ devfreq->total_trans++;
+ }
+ devfreq->last_stat_updated = cur_time;
+
+ return 0;
+}
+
/**
* update_devfreq() - Reevaluate the device and configure frequency.
* @devfreq: the devfreq instance.
@@ -115,6 +150,10 @@ int update_devfreq(struct devfreq *devfreq)
err = devfreq->profile->target(devfreq->dev.parent, &freq, flags);
if (err)
return err;
+ if (devfreq->profile->freq_table)
+ if (devfreq_update_status(devfreq, freq))
+ dev_err(&devfreq->dev,
+ "Couldn't update frequency transition information.\n");
devfreq->previous_freq = freq;
return err;
@@ -390,6 +429,15 @@ struct devfreq *devfreq_add_device(struct device *dev,
= msecs_to_jiffies(devfreq->profile->polling_ms);
devfreq->nb.notifier_call = devfreq_notifier_call;
+ devfreq->trans_table = devm_kzalloc(dev, sizeof(unsigned int) *
+ devfreq->profile->max_state *
+ devfreq->profile->max_state,
+ GFP_KERNEL);
+ devfreq->time_in_state = devm_kzalloc(dev, sizeof(unsigned int) *
+ devfreq->profile->max_state,
+ GFP_KERNEL);
+ devfreq->last_stat_updated = jiffies;
+
dev_set_name(&devfreq->dev, dev_name(dev));
err = device_register(&devfreq->dev);
if (err) {
@@ -587,6 +635,46 @@ static ssize_t show_max_freq(struct device *dev, struct device_attribute *attr,
return sprintf(buf, "%lu\n", to_devfreq(dev)->max_freq);
}
+static ssize_t show_trans_table(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct devfreq *devfreq = to_devfreq(dev);
+ ssize_t len;
+ int i, j, err;
+
+ err = devfreq_update_status(devfreq, devfreq->previous_freq);
+ if (err)
+ return 0;
+
+ len = sprintf(buf, " From : To\n");
+ len += sprintf(buf + len, " :");
+ for (i = 0; i < devfreq->profile->max_state; i++)
+ len += sprintf(buf + len, "%8u",
+ devfreq->profile->freq_table[i]);
+
+ len += sprintf(buf + len, " time(ms)\n");
+
+ for (i = 0; i < devfreq->profile->max_state; i++) {
+ if (devfreq->profile->freq_table[i]
+ == devfreq->previous_freq) {
+ len += sprintf(buf + len, "*");
+ } else {
+ len += sprintf(buf + len, " ");
+ }
+ len += sprintf(buf + len, "%8u:",
+ devfreq->profile->freq_table[i]);
+ for (j = 0; j < devfreq->profile->max_state; j++)
+ len += sprintf(buf + len, "%8u",
+ devfreq->trans_table[(i * 3) + j]);
+ len += sprintf(buf + len, "%10u\n",
+ jiffies_to_msecs(devfreq->time_in_state[i]));
+ }
+
+ len += sprintf(buf + len, "Total transition : %u\n",
+ devfreq->total_trans);
+ return len;
+}
+
static struct device_attribute devfreq_attrs[] = {
__ATTR(governor, S_IRUGO, show_governor, NULL),
__ATTR(cur_freq, S_IRUGO, show_freq, NULL),
@@ -595,6 +683,7 @@ static struct device_attribute devfreq_attrs[] = {
store_polling_interval),
__ATTR(min_freq, S_IRUGO | S_IWUSR, show_min_freq, store_min_freq),
__ATTR(max_freq, S_IRUGO | S_IWUSR, show_max_freq, store_max_freq),
+ __ATTR(trans_stat, S_IRUGO, show_trans_table, NULL),
{ },
};
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index 281c72a..30dc0d8 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -80,6 +80,9 @@ struct devfreq_dev_profile {
int (*get_dev_status)(struct device *dev,
struct devfreq_dev_status *stat);
void (*exit)(struct device *dev);
+
+ unsigned int *freq_table;
+ unsigned int max_state;
};
/**
@@ -164,6 +167,12 @@ struct devfreq {
unsigned long min_freq;
unsigned long max_freq;
+
+ /* information for device freqeuncy transition */
+ unsigned int total_trans;
+ unsigned int *trans_table;
+ unsigned long *time_in_state;
+ unsigned long last_stat_updated;
};
#if defined(CONFIG_PM_DEVFREQ)
--
1.7.4.1
This patch initializes freq_table and max_state of devfreq's profile.
They will be used for creating transition table.
Signed-off-by: Jonghwa Lee <[email protected]>
---
drivers/devfreq/exynos4_bus.c | 30 +++++++++++++++++++++++++++++-
1 files changed, 29 insertions(+), 1 deletions(-)
diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c
index 88ddc77..9c08855 100644
--- a/drivers/devfreq/exynos4_bus.c
+++ b/drivers/devfreq/exynos4_bus.c
@@ -985,7 +985,8 @@ static __devinit int exynos4_busfreq_probe(struct platform_device *pdev)
struct busfreq_data *data;
struct opp *opp;
struct device *dev = &pdev->dev;
- int err = 0;
+ int err = 0, i;
+ unsigned int *freq_table;
data = kzalloc(sizeof(struct busfreq_data), GFP_KERNEL);
if (data == NULL) {
@@ -1042,6 +1043,33 @@ static __devinit int exynos4_busfreq_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, data);
+ switch (data->type) {
+ case TYPE_BUSF_EXYNOS4210:
+ freq_table = devm_kzalloc(&pdev->dev, sizeof(unsigned int) * EX4210_LV_NUM,
+ GFP_KERNEL);
+
+ for (i = 0; i < EX4210_LV_NUM; i++)
+ freq_table[i] = exynos4210_busclk_table[i].clk;
+
+ exynos4_devfreq_profile.max_state = EX4210_LV_NUM;
+ break;
+ case TYPE_BUSF_EXYNOS4x12:
+ freq_table = devm_kzalloc(&pdev->dev, sizeof(unsigned int) * EX4x12_LV_NUM,
+ GFP_KERNEL);
+
+ for (i = 0; i < EX4x12_LV_NUM; i++)
+ freq_table[i] = exynos4x12_mifclk_table[i].clk;
+
+ exynos4_devfreq_profile.max_state = EX4x12_LV_NUM;
+ break;
+ default:
+ dev_err(dev, "Cannot determine the device id %d\n", data->type);
+ err = -EINVAL;
+ goto err_opp_add;
+ }
+
+ exynos4_devfreq_profile.freq_table = freq_table;
+
busfreq_mon_reset(data);
data->devfreq = devfreq_add_device(dev, &exynos4_devfreq_profile,
--
1.7.4.1
> This patch adds sysfs node which can be used to get information of frequency
> transition. It represents transition table which contains total number of transition of
> each freqeuncy state and time spent. It is inspired CPUFREQ's status driver.
>
> Signed-off-by: Jonghwa Lee <[email protected]>
>
Signed-off-by: MyungJoo Ham <[email protected]>
????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay? ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?
> This patch initializes freq_table and max_state of devfreq's profile.
> They will be used for creating transition table.
>
> Signed-off-by: Jonghwa Lee <[email protected]>
Signed-off-by: MyungJoo Ham <[email protected]>
> ---
> drivers/devfreq/exynos4_bus.c | 30 +++++++++++++++++++++++++++++-
> 1 files changed, 29 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c
> index 88ddc77..9c08855 100644
> --- a/drivers/devfreq/exynos4_bus.c
> +++ b/drivers/devfreq/exynos4_bus.c
> @@ -985,7 +985,8 @@ static __devinit int exynos4_busfreq_probe(struct platform_device *pdev)
> struct busfreq_data *data;
> struct opp *opp;
> struct device *dev = &pdev->dev;
> - int err = 0;
> + int err = 0, i;
> + unsigned int *freq_table;
>
> data = kzalloc(sizeof(struct busfreq_data), GFP_KERNEL);
> if (data == NULL) {
> @@ -1042,6 +1043,33 @@ static __devinit int exynos4_busfreq_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, data);
>
> + switch (data->type) {
> + case TYPE_BUSF_EXYNOS4210:
> + freq_table = devm_kzalloc(&pdev->dev, sizeof(unsigned int) * EX4210_LV_NUM,
> + GFP_KERNEL);
> +
> + for (i = 0; i < EX4210_LV_NUM; i++)
> + freq_table[i] = exynos4210_busclk_table[i].clk;
> +
> + exynos4_devfreq_profile.max_state = EX4210_LV_NUM;
> + break;
> + case TYPE_BUSF_EXYNOS4x12:
> + freq_table = devm_kzalloc(&pdev->dev, sizeof(unsigned int) * EX4x12_LV_NUM,
> + GFP_KERNEL);
> +
> + for (i = 0; i < EX4x12_LV_NUM; i++)
> + freq_table[i] = exynos4x12_mifclk_table[i].clk;
> +
> + exynos4_devfreq_profile.max_state = EX4x12_LV_NUM;
> + break;
> + default:
> + dev_err(dev, "Cannot determine the device id %d\n", data->type);
> + err = -EINVAL;
> + goto err_opp_add;
> + }
> +
> + exynos4_devfreq_profile.freq_table = freq_table;
> +
> busfreq_mon_reset(data);
>
> data->devfreq = devfreq_add_device(dev, &exynos4_devfreq_profile,
> --
> 1.7.4.1
>
>
>
>
>
>
>
>
????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay? ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?
On Thursday, August 16, 2012, Jonghwa Lee wrote:
> This patch adds sysfs node which can be used to get information of frequency
> transition. It represents transition table which contains total number of transition of
> each freqeuncy state and time spent. It is inspired CPUFREQ's status driver.
First off, please add kerneldoc comments to the new functions.
It would be good to know what they are intended to do.
Second, multiline files in sysfs are generally not welcome. Perhaps this
should go into debugfs instead?
Rafael
> Signed-off-by: Jonghwa Lee <[email protected]>
> ---
> drivers/devfreq/devfreq.c | 89 +++++++++++++++++++++++++++++++++++++++++++++
> include/linux/devfreq.h | 9 +++++
> 2 files changed, 98 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
> index 70c31d4..8b53eaf 100644
> --- a/drivers/devfreq/devfreq.c
> +++ b/drivers/devfreq/devfreq.c
> @@ -72,6 +72,41 @@ static struct devfreq *find_device_devfreq(struct device *dev)
> return ERR_PTR(-ENODEV);
> }
>
> +int devfreq_get_freq_level(struct devfreq *devfreq, unsigned long freq)
> +{
> + int lev;
> +
> + for (lev = 0; lev < devfreq->profile->max_state; lev++)
> + if (freq == devfreq->profile->freq_table[lev])
> + return lev;
> +
> + return -EINVAL;
> +}
> +
> +int devfreq_update_status(struct devfreq *devfreq, unsigned long freq)
> +{
> + int lev, prev_lev;
> + unsigned long cur_time;
> +
> + lev = devfreq_get_freq_level(devfreq, freq);
> + if (lev < 0)
> + return lev;
> +
> + cur_time = jiffies;
> + devfreq->time_in_state[lev] +=
> + cur_time - devfreq->last_stat_updated;
> + if (freq != devfreq->previous_freq) {
> + prev_lev = devfreq_get_freq_level(devfreq,
> + devfreq->previous_freq);
> + devfreq->trans_table[(prev_lev *
> + devfreq->profile->max_state) + lev]++;
> + devfreq->total_trans++;
> + }
> + devfreq->last_stat_updated = cur_time;
> +
> + return 0;
> +}
> +
> /**
> * update_devfreq() - Reevaluate the device and configure frequency.
> * @devfreq: the devfreq instance.
> @@ -115,6 +150,10 @@ int update_devfreq(struct devfreq *devfreq)
> err = devfreq->profile->target(devfreq->dev.parent, &freq, flags);
> if (err)
> return err;
> + if (devfreq->profile->freq_table)
> + if (devfreq_update_status(devfreq, freq))
> + dev_err(&devfreq->dev,
> + "Couldn't update frequency transition information.\n");
>
> devfreq->previous_freq = freq;
> return err;
> @@ -390,6 +429,15 @@ struct devfreq *devfreq_add_device(struct device *dev,
> = msecs_to_jiffies(devfreq->profile->polling_ms);
> devfreq->nb.notifier_call = devfreq_notifier_call;
>
> + devfreq->trans_table = devm_kzalloc(dev, sizeof(unsigned int) *
> + devfreq->profile->max_state *
> + devfreq->profile->max_state,
> + GFP_KERNEL);
> + devfreq->time_in_state = devm_kzalloc(dev, sizeof(unsigned int) *
> + devfreq->profile->max_state,
> + GFP_KERNEL);
> + devfreq->last_stat_updated = jiffies;
> +
> dev_set_name(&devfreq->dev, dev_name(dev));
> err = device_register(&devfreq->dev);
> if (err) {
> @@ -587,6 +635,46 @@ static ssize_t show_max_freq(struct device *dev, struct device_attribute *attr,
> return sprintf(buf, "%lu\n", to_devfreq(dev)->max_freq);
> }
>
> +static ssize_t show_trans_table(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct devfreq *devfreq = to_devfreq(dev);
> + ssize_t len;
> + int i, j, err;
> +
> + err = devfreq_update_status(devfreq, devfreq->previous_freq);
> + if (err)
> + return 0;
> +
> + len = sprintf(buf, " From : To\n");
> + len += sprintf(buf + len, " :");
> + for (i = 0; i < devfreq->profile->max_state; i++)
> + len += sprintf(buf + len, "%8u",
> + devfreq->profile->freq_table[i]);
> +
> + len += sprintf(buf + len, " time(ms)\n");
> +
> + for (i = 0; i < devfreq->profile->max_state; i++) {
> + if (devfreq->profile->freq_table[i]
> + == devfreq->previous_freq) {
> + len += sprintf(buf + len, "*");
> + } else {
> + len += sprintf(buf + len, " ");
> + }
> + len += sprintf(buf + len, "%8u:",
> + devfreq->profile->freq_table[i]);
> + for (j = 0; j < devfreq->profile->max_state; j++)
> + len += sprintf(buf + len, "%8u",
> + devfreq->trans_table[(i * 3) + j]);
> + len += sprintf(buf + len, "%10u\n",
> + jiffies_to_msecs(devfreq->time_in_state[i]));
> + }
> +
> + len += sprintf(buf + len, "Total transition : %u\n",
> + devfreq->total_trans);
> + return len;
> +}
> +
> static struct device_attribute devfreq_attrs[] = {
> __ATTR(governor, S_IRUGO, show_governor, NULL),
> __ATTR(cur_freq, S_IRUGO, show_freq, NULL),
> @@ -595,6 +683,7 @@ static struct device_attribute devfreq_attrs[] = {
> store_polling_interval),
> __ATTR(min_freq, S_IRUGO | S_IWUSR, show_min_freq, store_min_freq),
> __ATTR(max_freq, S_IRUGO | S_IWUSR, show_max_freq, store_max_freq),
> + __ATTR(trans_stat, S_IRUGO, show_trans_table, NULL),
> { },
> };
>
> diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
> index 281c72a..30dc0d8 100644
> --- a/include/linux/devfreq.h
> +++ b/include/linux/devfreq.h
> @@ -80,6 +80,9 @@ struct devfreq_dev_profile {
> int (*get_dev_status)(struct device *dev,
> struct devfreq_dev_status *stat);
> void (*exit)(struct device *dev);
> +
> + unsigned int *freq_table;
> + unsigned int max_state;
> };
>
> /**
> @@ -164,6 +167,12 @@ struct devfreq {
>
> unsigned long min_freq;
> unsigned long max_freq;
> +
> + /* information for device freqeuncy transition */
> + unsigned int total_trans;
> + unsigned int *trans_table;
> + unsigned long *time_in_state;
> + unsigned long last_stat_updated;
> };
>
> #if defined(CONFIG_PM_DEVFREQ)
>
On Thursday, August 16, 2012, Jonghwa Lee wrote:
> This patch initializes freq_table and max_state of devfreq's profile.
> They will be used for creating transition table.
>
> Signed-off-by: Jonghwa Lee <[email protected]>
Does that depend on [1/2]?
Rafael
> ---
> drivers/devfreq/exynos4_bus.c | 30 +++++++++++++++++++++++++++++-
> 1 files changed, 29 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c
> index 88ddc77..9c08855 100644
> --- a/drivers/devfreq/exynos4_bus.c
> +++ b/drivers/devfreq/exynos4_bus.c
> @@ -985,7 +985,8 @@ static __devinit int exynos4_busfreq_probe(struct platform_device *pdev)
> struct busfreq_data *data;
> struct opp *opp;
> struct device *dev = &pdev->dev;
> - int err = 0;
> + int err = 0, i;
> + unsigned int *freq_table;
>
> data = kzalloc(sizeof(struct busfreq_data), GFP_KERNEL);
> if (data == NULL) {
> @@ -1042,6 +1043,33 @@ static __devinit int exynos4_busfreq_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, data);
>
> + switch (data->type) {
> + case TYPE_BUSF_EXYNOS4210:
> + freq_table = devm_kzalloc(&pdev->dev, sizeof(unsigned int) * EX4210_LV_NUM,
> + GFP_KERNEL);
> +
> + for (i = 0; i < EX4210_LV_NUM; i++)
> + freq_table[i] = exynos4210_busclk_table[i].clk;
> +
> + exynos4_devfreq_profile.max_state = EX4210_LV_NUM;
> + break;
> + case TYPE_BUSF_EXYNOS4x12:
> + freq_table = devm_kzalloc(&pdev->dev, sizeof(unsigned int) * EX4x12_LV_NUM,
> + GFP_KERNEL);
> +
> + for (i = 0; i < EX4x12_LV_NUM; i++)
> + freq_table[i] = exynos4x12_mifclk_table[i].clk;
> +
> + exynos4_devfreq_profile.max_state = EX4x12_LV_NUM;
> + break;
> + default:
> + dev_err(dev, "Cannot determine the device id %d\n", data->type);
> + err = -EINVAL;
> + goto err_opp_add;
> + }
> +
> + exynos4_devfreq_profile.freq_table = freq_table;
> +
> busfreq_mon_reset(data);
>
> data->devfreq = devfreq_add_device(dev, &exynos4_devfreq_profile,
>
Hi, Rafael.
On 2012년 08월 24일 07:21, Rafael J. Wysocki wrote:
> On Thursday, August 16, 2012, Jonghwa Lee wrote:
>> This patch adds sysfs node which can be used to get information of frequency
>> transition. It represents transition table which contains total number of transition of
>> each freqeuncy state and time spent. It is inspired CPUFREQ's status driver.
> First off, please add kerneldoc comments to the new functions.
> It would be good to know what they are intended to do.
Okay, I'll add document for describing what it'll be used to .
> Second, multiline files in sysfs are generally not welcome. Perhaps this
> should go into debugfs instead?
>
> Rafael
Yes, you're right. I didn't know the sysfs constraints until I checked
debugfs kerneldoc.
I'll update it either.
>
>> Signed-off-by: Jonghwa Lee <[email protected]>
>> ---
>> drivers/devfreq/devfreq.c | 89 +++++++++++++++++++++++++++++++++++++++++++++
>> include/linux/devfreq.h | 9 +++++
>> 2 files changed, 98 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
>> index 70c31d4..8b53eaf 100644
>> --- a/drivers/devfreq/devfreq.c
>> +++ b/drivers/devfreq/devfreq.c
>> @@ -72,6 +72,41 @@ static struct devfreq *find_device_devfreq(struct device *dev)
>> return ERR_PTR(-ENODEV);
>> }
>>
>> +int devfreq_get_freq_level(struct devfreq *devfreq, unsigned long freq)
>> +{
>> + int lev;
>> +
>> + for (lev = 0; lev < devfreq->profile->max_state; lev++)
>> + if (freq == devfreq->profile->freq_table[lev])
>> + return lev;
>> +
>> + return -EINVAL;
>> +}
>> +
>> +int devfreq_update_status(struct devfreq *devfreq, unsigned long freq)
>> +{
>> + int lev, prev_lev;
>> + unsigned long cur_time;
>> +
>> + lev = devfreq_get_freq_level(devfreq, freq);
>> + if (lev < 0)
>> + return lev;
>> +
>> + cur_time = jiffies;
>> + devfreq->time_in_state[lev] +=
>> + cur_time - devfreq->last_stat_updated;
>> + if (freq != devfreq->previous_freq) {
>> + prev_lev = devfreq_get_freq_level(devfreq,
>> + devfreq->previous_freq);
>> + devfreq->trans_table[(prev_lev *
>> + devfreq->profile->max_state) + lev]++;
>> + devfreq->total_trans++;
>> + }
>> + devfreq->last_stat_updated = cur_time;
>> +
>> + return 0;
>> +}
>> +
>> /**
>> * update_devfreq() - Reevaluate the device and configure frequency.
>> * @devfreq: the devfreq instance.
>> @@ -115,6 +150,10 @@ int update_devfreq(struct devfreq *devfreq)
>> err = devfreq->profile->target(devfreq->dev.parent, &freq, flags);
>> if (err)
>> return err;
>> + if (devfreq->profile->freq_table)
>> + if (devfreq_update_status(devfreq, freq))
>> + dev_err(&devfreq->dev,
>> + "Couldn't update frequency transition information.\n");
>>
>> devfreq->previous_freq = freq;
>> return err;
>> @@ -390,6 +429,15 @@ struct devfreq *devfreq_add_device(struct device *dev,
>> = msecs_to_jiffies(devfreq->profile->polling_ms);
>> devfreq->nb.notifier_call = devfreq_notifier_call;
>>
>> + devfreq->trans_table = devm_kzalloc(dev, sizeof(unsigned int) *
>> + devfreq->profile->max_state *
>> + devfreq->profile->max_state,
>> + GFP_KERNEL);
>> + devfreq->time_in_state = devm_kzalloc(dev, sizeof(unsigned int) *
>> + devfreq->profile->max_state,
>> + GFP_KERNEL);
>> + devfreq->last_stat_updated = jiffies;
>> +
>> dev_set_name(&devfreq->dev, dev_name(dev));
>> err = device_register(&devfreq->dev);
>> if (err) {
>> @@ -587,6 +635,46 @@ static ssize_t show_max_freq(struct device *dev, struct device_attribute *attr,
>> return sprintf(buf, "%lu\n", to_devfreq(dev)->max_freq);
>> }
>>
>> +static ssize_t show_trans_table(struct device *dev, struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct devfreq *devfreq = to_devfreq(dev);
>> + ssize_t len;
>> + int i, j, err;
>> +
>> + err = devfreq_update_status(devfreq, devfreq->previous_freq);
>> + if (err)
>> + return 0;
>> +
>> + len = sprintf(buf, " From : To\n");
>> + len += sprintf(buf + len, " :");
>> + for (i = 0; i < devfreq->profile->max_state; i++)
>> + len += sprintf(buf + len, "%8u",
>> + devfreq->profile->freq_table[i]);
>> +
>> + len += sprintf(buf + len, " time(ms)\n");
>> +
>> + for (i = 0; i < devfreq->profile->max_state; i++) {
>> + if (devfreq->profile->freq_table[i]
>> + == devfreq->previous_freq) {
>> + len += sprintf(buf + len, "*");
>> + } else {
>> + len += sprintf(buf + len, " ");
>> + }
>> + len += sprintf(buf + len, "%8u:",
>> + devfreq->profile->freq_table[i]);
>> + for (j = 0; j < devfreq->profile->max_state; j++)
>> + len += sprintf(buf + len, "%8u",
>> + devfreq->trans_table[(i * 3) + j]);
>> + len += sprintf(buf + len, "%10u\n",
>> + jiffies_to_msecs(devfreq->time_in_state[i]));
>> + }
>> +
>> + len += sprintf(buf + len, "Total transition : %u\n",
>> + devfreq->total_trans);
>> + return len;
>> +}
>> +
>> static struct device_attribute devfreq_attrs[] = {
>> __ATTR(governor, S_IRUGO, show_governor, NULL),
>> __ATTR(cur_freq, S_IRUGO, show_freq, NULL),
>> @@ -595,6 +683,7 @@ static struct device_attribute devfreq_attrs[] = {
>> store_polling_interval),
>> __ATTR(min_freq, S_IRUGO | S_IWUSR, show_min_freq, store_min_freq),
>> __ATTR(max_freq, S_IRUGO | S_IWUSR, show_max_freq, store_max_freq),
>> + __ATTR(trans_stat, S_IRUGO, show_trans_table, NULL),
>> { },
>> };
>>
>> diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
>> index 281c72a..30dc0d8 100644
>> --- a/include/linux/devfreq.h
>> +++ b/include/linux/devfreq.h
>> @@ -80,6 +80,9 @@ struct devfreq_dev_profile {
>> int (*get_dev_status)(struct device *dev,
>> struct devfreq_dev_status *stat);
>> void (*exit)(struct device *dev);
>> +
>> + unsigned int *freq_table;
>> + unsigned int max_state;
>> };
>>
>> /**
>> @@ -164,6 +167,12 @@ struct devfreq {
>>
>> unsigned long min_freq;
>> unsigned long max_freq;
>> +
>> + /* information for device freqeuncy transition */
>> + unsigned int total_trans;
>> + unsigned int *trans_table;
>> + unsigned long *time_in_state;
>> + unsigned long last_stat_updated;
>> };
>>
>> #if defined(CONFIG_PM_DEVFREQ)
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
On 2012년 08월 24일 07:22, Rafael J. Wysocki wrote:
> On Thursday, August 16, 2012, Jonghwa Lee wrote:
>> This patch initializes freq_table and max_state of devfreq's profile.
>> They will be used for creating transition table.
>>
>> Signed-off-by: Jonghwa Lee <[email protected]>
> Does that depend on [1/2]?
>
> Rafael
Not exactly, but it shows that required procedure for using function
included in patch[1/2].
Thanks.
>
>> ---
>> drivers/devfreq/exynos4_bus.c | 30 +++++++++++++++++++++++++++++-
>> 1 files changed, 29 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c
>> index 88ddc77..9c08855 100644
>> --- a/drivers/devfreq/exynos4_bus.c
>> +++ b/drivers/devfreq/exynos4_bus.c
>> @@ -985,7 +985,8 @@ static __devinit int exynos4_busfreq_probe(struct platform_device *pdev)
>> struct busfreq_data *data;
>> struct opp *opp;
>> struct device *dev = &pdev->dev;
>> - int err = 0;
>> + int err = 0, i;
>> + unsigned int *freq_table;
>>
>> data = kzalloc(sizeof(struct busfreq_data), GFP_KERNEL);
>> if (data == NULL) {
>> @@ -1042,6 +1043,33 @@ static __devinit int exynos4_busfreq_probe(struct platform_device *pdev)
>>
>> platform_set_drvdata(pdev, data);
>>
>> + switch (data->type) {
>> + case TYPE_BUSF_EXYNOS4210:
>> + freq_table = devm_kzalloc(&pdev->dev, sizeof(unsigned int) * EX4210_LV_NUM,
>> + GFP_KERNEL);
>> +
>> + for (i = 0; i < EX4210_LV_NUM; i++)
>> + freq_table[i] = exynos4210_busclk_table[i].clk;
>> +
>> + exynos4_devfreq_profile.max_state = EX4210_LV_NUM;
>> + break;
>> + case TYPE_BUSF_EXYNOS4x12:
>> + freq_table = devm_kzalloc(&pdev->dev, sizeof(unsigned int) * EX4x12_LV_NUM,
>> + GFP_KERNEL);
>> +
>> + for (i = 0; i < EX4x12_LV_NUM; i++)
>> + freq_table[i] = exynos4x12_mifclk_table[i].clk;
>> +
>> + exynos4_devfreq_profile.max_state = EX4x12_LV_NUM;
>> + break;
>> + default:
>> + dev_err(dev, "Cannot determine the device id %d\n", data->type);
>> + err = -EINVAL;
>> + goto err_opp_add;
>> + }
>> +
>> + exynos4_devfreq_profile.freq_table = freq_table;
>> +
>> busfreq_mon_reset(data);
>>
>> data->devfreq = devfreq_add_device(dev, &exynos4_devfreq_profile,
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>