From: Allan Chou <[email protected]>
Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet
Bridge Controller (Vendor=04b4 ProdID=3610).
Patch verified on x64 linux kernel 4.7.4, 4.8.6, 4.9-rc4 systems
with the Kensington SD4600P USB-C Universal Dock with Power,
which uses the Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge
Controller.
A similar patch was signed-off and tested-by Allan Chou
<[email protected]> on 2015-12-01.
Allan verified his similar patch on x86 Linux kernel 4.1.6 system
with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
Tested-by: Allan Chou <[email protected]>
Tested-by: Chris Roth <[email protected]>
Tested-by: Artjom Simon <[email protected]>
Signed-off-by: Allan Chou <[email protected]>
Signed-off-by: Chris Roth <[email protected]>
---
drivers/net/usb/ax88179_178a.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index e6338c1..8a6675d 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1656,6 +1656,19 @@ static const struct driver_info ax88178a_info = {
.tx_fixup = ax88179_tx_fixup,
};
+static const struct driver_info cypress_GX3_info = {
+ .description = "Cypress GX3 SuperSpeed to Gigabit Ethernet Controller",
+ .bind = ax88179_bind,
+ .unbind = ax88179_unbind,
+ .status = ax88179_status,
+ .link_reset = ax88179_link_reset,
+ .reset = ax88179_reset,
+ .stop = ax88179_stop,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+ .rx_fixup = ax88179_rx_fixup,
+ .tx_fixup = ax88179_tx_fixup,
+};
+
static const struct driver_info dlink_dub1312_info = {
.description = "D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter",
.bind = ax88179_bind,
@@ -1718,6 +1731,10 @@ static const struct usb_device_id products[] = {
, USB_DEVICE(0x0b95, 0x178a),
.driver_info = (unsigned long)&ax88178a_info,
}, {
+ /* Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller */
+ USB_DEVICE(0x04b4, 0x3610),
+ .driver_info = (unsigned long)&cypress_GX3_info,
+}, {
/* D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter */
USB_DEVICE(0x2001, 0x4a00),
.driver_info = (unsigned long)&dlink_dub1312_info,
--
2.7.4
On Mon, Nov 07, 2016 at 04:44:20PM -0600, Chris Roth wrote:
> From: Allan Chou <[email protected]>
>
> Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet
> Bridge Controller (Vendor=04b4 ProdID=3610).
>
> Patch verified on x64 linux kernel 4.7.4, 4.8.6, 4.9-rc4 systems
> with the Kensington SD4600P USB-C Universal Dock with Power,
> which uses the Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge
> Controller.
>
> A similar patch was signed-off and tested-by Allan Chou
> <[email protected]> on 2015-12-01.
>
> Allan verified his similar patch on x86 Linux kernel 4.1.6 system
> with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
>
> Tested-by: Allan Chou <[email protected]>
> Tested-by: Chris Roth <[email protected]>
> Tested-by: Artjom Simon <[email protected]>
>
> Signed-off-by: Allan Chou <[email protected]>
> Signed-off-by: Chris Roth <[email protected]>
> ---
> drivers/net/usb/ax88179_178a.c | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
> index e6338c1..8a6675d 100644
> --- a/drivers/net/usb/ax88179_178a.c
> +++ b/drivers/net/usb/ax88179_178a.c
> @@ -1656,6 +1656,19 @@ static const struct driver_info ax88178a_info = {
> .tx_fixup = ax88179_tx_fixup,
> };
>
> +static const struct driver_info cypress_GX3_info = {
> + .description = "Cypress GX3 SuperSpeed to Gigabit Ethernet Controller",
> + .bind = ax88179_bind,
> + .unbind = ax88179_unbind,
> + .status = ax88179_status,
> + .link_reset = ax88179_link_reset,
> + .reset = ax88179_reset,
> + .stop = ax88179_stop,
> + .flags = FLAG_ETHER | FLAG_FRAMING_AX,
> + .rx_fixup = ax88179_rx_fixup,
> + .tx_fixup = ax88179_tx_fixup,
> +};
Your tabs got eaten and converted to spaces, making this patch
impossible to apply :(
And you forgot to list what changed from v3, please put that below the
--- line.
thanks,
greg k-h
From: Allan Chou <[email protected]>
Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet
Bridge Controller (Vendor=04b4 ProdID=3610).
Patch verified on x64 linux kernel 4.7.4, 4.8.6, 4.9-rc4 systems
with the Kensington SD4600P USB-C Universal Dock with Power,
which uses the Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge
Controller.
A similar patch was signed-off and tested-by Allan Chou
<[email protected]> on 2015-12-01.
Allan verified his similar patch on x86 Linux kernel 4.1.6 system
with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
Tested-by: Allan Chou <[email protected]>
Tested-by: Chris Roth <[email protected]>
Tested-by: Artjom Simon <[email protected]>
Signed-off-by: Allan Chou <[email protected]>
Signed-off-by: Chris Roth <[email protected]>
---
Changes in v4, v5:
- Add verification of patch on 4.8.6, 4.9-rc4 (v4)
- Add tester Artjom Simon <[email protected]> (v4)
- Reformat spaces to tabs (v5)
drivers/net/usb/ax88179_178a.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index e6338c1..8a6675d 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1656,6 +1656,19 @@ static const struct driver_info ax88178a_info = {
.tx_fixup = ax88179_tx_fixup,
};
+static const struct driver_info cypress_GX3_info = {
+ .description = "Cypress GX3 SuperSpeed to Gigabit Ethernet Controller",
+ .bind = ax88179_bind,
+ .unbind = ax88179_unbind,
+ .status = ax88179_status,
+ .link_reset = ax88179_link_reset,
+ .reset = ax88179_reset,
+ .stop = ax88179_stop,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+ .rx_fixup = ax88179_rx_fixup,
+ .tx_fixup = ax88179_tx_fixup,
+};
+
static const struct driver_info dlink_dub1312_info = {
.description = "D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter",
.bind = ax88179_bind,
@@ -1718,6 +1731,10 @@ static const struct usb_device_id products[] = {
USB_DEVICE(0x0b95, 0x178a),
.driver_info = (unsigned long)&ax88178a_info,
}, {
+ /* Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller */
+ USB_DEVICE(0x04b4, 0x3610),
+ .driver_info = (unsigned long)&cypress_GX3_info,
+}, {
/* D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter */
USB_DEVICE(0x2001, 0x4a00),
.driver_info = (unsigned long)&dlink_dub1312_info,
--
2.7.4
From: <[email protected]>
Date: Tue, 8 Nov 2016 16:08:01 -0600
> From: Allan Chou <[email protected]>
>
> Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet
> Bridge Controller (Vendor=04b4 ProdID=3610).
>
> Patch verified on x64 linux kernel 4.7.4, 4.8.6, 4.9-rc4 systems
> with the Kensington SD4600P USB-C Universal Dock with Power,
> which uses the Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge
> Controller.
>
> A similar patch was signed-off and tested-by Allan Chou
> <[email protected]> on 2015-12-01.
>
> Allan verified his similar patch on x86 Linux kernel 4.1.6 system
> with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
>
> Tested-by: Allan Chou <[email protected]>
> Tested-by: Chris Roth <[email protected]>
> Tested-by: Artjom Simon <[email protected]>
>
> Signed-off-by: Allan Chou <[email protected]>
> Signed-off-by: Chris Roth <[email protected]>
Applied.